Thanks Thanks:  0
Ergebnis 1 bis 5 von 5
  1. #1
    Avatar von Black_64
    Registriert seit
    04.04.2013
    Beiträge
    1.165
    Thanks (gegeben)
    1297
    Thanks (bekommen)
    817
    Total Downloaded
    3,54 MB
    Total Downloaded
    3,54 MB
    ReceiverDanke

    [Howto] GB800 SOLO/SE VFD setup

    To get the channel number on the VFD you need to set "Show Clock" to the value "in Standby: yes" or "in Standby: no". (look at the screenshots)
    After that it needs a zap or you wait for a channel info update.

    I will explain the 4 modes of "Show Clock"

    - Aus => VFD complete off, no matter standby or not
    - Ja => shows the clock always on the VFD, also in standby
    - in Standby: yes => show channel number, shows only the clock in stanby
    - in Standby: no => show channel number, switch off vfd in stanby
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken [Howto] GB800 SOLO/SE VFD setup-vfdgiga1.jpg   [Howto] GB800 SOLO/SE VFD setup-vfdgiga2.jpg  


    •   Alt Advertising

       

  2. #2
    Anfänger
    Registriert seit
    05.05.2013
    Beiträge
    10
    Thanks (gegeben)
    2
    Thanks (bekommen)
    0
    Total Downloaded
    23,77 MB
    Total Downloaded
    23,77 MB
    ReceiverDanke
    Hey,

    i flashed my 800 Se with the newest image today. Maybe i`m too stupid for the right VFD-setup. So her is my question: I only get the channelnumber in my dysplay when I switch to another channel. The number blinks for 2 times and after that there is nothing. Is this wanted or is it also possible that the channelnumber is shown permant on the display?

    Thx and best regards,

    MprL

  3. #3
    Avatar von Black_64
    Registriert seit
    04.04.2013
    Beiträge
    1.165
    Thanks (gegeben)
    1297
    Thanks (bekommen)
    817
    Themenstarter
    Total Downloaded
    3,54 MB
    Total Downloaded
    3,54 MB
    ReceiverDanke
    No no, your are not to stupid.
    It seems we have a little problem with the vfd.
    We made some change the last week but there are stil some bugs.

    There are some reports that this happens when you use a different skin.
    Can you try the default skin? Or are you already using the default skin?

  4. #4
    Anfänger
    Registriert seit
    05.05.2013
    Beiträge
    10
    Thanks (gegeben)
    2
    Thanks (bekommen)
    0
    Total Downloaded
    23,77 MB
    Total Downloaded
    23,77 MB
    ReceiverDanke
    Glad to hear that ;-)

    I got the issue with the default and Metrix skin and noticed it right after the flash where only the default skin was installed.

  5. #5
    Anfänger
    Registriert seit
    05.05.2013
    Beiträge
    10
    Thanks (gegeben)
    2
    Thanks (bekommen)
    0
    Total Downloaded
    23,77 MB
    Total Downloaded
    23,77 MB
    ReceiverDanke
    Anything new here? With the default skin it works fine now but with other skins (In my case MetrixHD) the issue still excists....


Ähnliche Themen

  1. Gs bei rts hd mit solo 2
    Von ciccio81 im Forum VU+ Solo 2
    Antworten: 5
    Letzter Beitrag: 15.08.2013, 21:20

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 20:13 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 4,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com