Thema: Bootcrash mit "serial-log"

Zitat von svox

Bei mir läuft es bisher auch... nur war meine Box heute komplett an und hat nicht aus Standby aufgenommen..

Hat schon den neuen Treiber drauf!?

Mit dem habe ich getestet. http://www.opena.tv/forum/showthread...ll=1#post49216

@Gundo: der "Oops", den Du in den Logs siehst, ist der Crash/kernel panic. Dabei schreibt der Kernel die CPU-Register etc. raus und versucht, moeglichst viele Infos ueber die Ursache des Absturzes zu geben (bei huskys Log ist ihm das besser gelungen inkl. Zeilenangabe). Kernel-Entwickler koennen dann manchmal herauslesen, was da genau passiert ist. Ich leider nicht. Darum waere das serial log mit den -x hilfreich, denn dann sehen wir, welcher Befehl den crash ausgeloest hat. Sollte das bei mehreren Leuten derselbe Befehl sein, waere vielleicht klar, welche Hardware da gerade versucht wird zu aktivieren etc. Und dann wuesste man, wo man suchen muss und ob der Fehler im vanilla kernel auftritt oder im treiber-Modul, also dem dvb.ko.

Danke für die Info.

Wenn es crasht sieht das so bei mir aus im Log:

Code:

...
INIT: version 2.88 booting

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
CPU 0 Unable to handle kernel paging request at virtual address 000000c0, epc == 8000f8f0, ra == 80004120
Oops[#1]:
Cpu 0
$ 0   : 00000000 10100700 00000000 00030001
$ 4   : 00000028 1f1ed001 0000000c 00000001
$ 8   : 10100700 1000001e 8078dc80 00002000
$12   : 00000000 0000000f 0000000f 0000001e
$16   : 0000000c 00000029 00000000 00000000
...

Wenn es nicht crasht sieht es so an dieser Stelle so aus:

Code:

...
INIT: version 2.88 booting

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
fb0: brcmfb frame buffer device
input: gigablue remote control as /devices/virtual/input/input0
DVB: registering new adapter (gbquad)
DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2 NIM (internal))...
DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2 NIM (internal))...
DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))...
DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))..
...

Man beachte "EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)".

Bedeutet das nun das der Crash was mit dem Device "sdb1" zu tun hat ?

Und im Log steht weiter, ob crash oder nicht:

Code:

...
USB: Locating Class FF Vendor 0B95 Product 1790: Driver not found.
*** Corsair  Slider 3.0        (64072 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=ee000000!
dir: Could not init file system: File system not recognized
*** Corsair  Slider 3.0        (64072 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=ee000000!
dir: Could not init file system: File system not recognized
Executing STARTUP...
Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/7862272 0x80780800/128320 Entry address is 0x805ec990
Starting program at 0x805ec990
...

/dev/sdb1: LABEL="CORSAIR_64GB" UUID="53da...03" TYPE="ext4" PARTUUID="fbc...b7a"

Gibt´s da einen Zusammenhang ?

Eher nicht. In beiden Logs (husky und Deins) sieht man, dass das Modul dvb schon geladen wurde. Und das passiert erst im Script nach dem Mount-Script. D.h. der Fehler wird durch das dvb.ko selbst ausgeloest oder durch irgendeine Aktion in einem Script nach dem Laden des Moduls. Darum brauchen wir das -x bei allen Scripten.

Na dann ist doch alles klar: solange man mitloggt, stuerzt die Box nicht ab

Hab gestern einen Bootstopp erwischt mit erweitertem Logging:

Code:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.18 10:30:50 =~=~=~=~=~=~=~=~=~=~=~=
  
BCM73460012




AVS 0.5.5


BO


AVS not found!




M00
SHMOO VER 1.14
MCB


PKID 20121012 003B6000 003B0000 041B203F 00001C00 


S300001DB 
000013E0 
+00000004 
RDLY W0 00000004 
RDLY W1 00000004 


RDEN W0 0000003E 
RDEN W1 0000003F 


RDQS W0 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
 01 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
 02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
 03 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
 04 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
 05 --------+++++++++++++++++++++++X+++++++++++++++++++++++---------
 06 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
 07 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
 08 ---------+++++++++++++++++++++++X++++++++++++++++++++++---------
 09 -----------+++++++++++++++++++++X+++++++++++++++++++++----------
 10 ---------++++++++++++++++++++++X+++++++++++++++++++++-----------
 11 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
 12 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
 13 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
 14 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
 15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------




P    W0 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ----------++++++++++++++++++++++++X++++++++++++++++++++++++-----
 01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
 02 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
 03 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
 04 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
 05 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
 06 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 07 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
 08 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
 09 -----------++++++++++++++++++++++++X++++++++++++++++++++++++----
 10 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
 11 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
 12 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
 13 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
 14 --------+++++++++++++++++++++++X+++++++++++++++++++++++---------
 15 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++----




N    W0 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++--
 01 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
 02 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++--
 03 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
 04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 05 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
 06 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 07 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
 08 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
 09 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
 10 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
 11 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
 12 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
 13 --+++++++++++++++++++++++X+++++++++++++++++++++++---------------
 14 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
 15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------




RDQS W1 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
 01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
 02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
 03 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
 04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 05 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++---
 06 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
 07 -----------+++++++++++++++++++++++X+++++++++++++++++++++++------
 08 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
 09 -----------++++++++++++++++++++++X+++++++++++++++++++++---------
 10 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
 11 ----------+++++++++++++++++++++++X+++++++++++++++++++++++-------
 12 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
 13 ----------++++++++++++++++++++++++X++++++++++++++++++++++++-----
 14 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
 15 -----------++++++++++++++++++++++X++++++++++++++++++++++--------




P    W1 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++--
 01 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
 02 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
 03 ---------+++++++++++++++++++++++++++X++++++++++++++++++++++++++-
 04 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
 05 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++--
 06 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
 07 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
 08 -------+++++++++++++++++++++++X+++++++++++++++++++++++----------
 09 ----------++++++++++++++++++++++X++++++++++++++++++++++---------
 10 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
 11 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
 12 -----+++++++++++++++++++++++X++++++++++++++++++++++-------------
 13 ---------+++++++++++++++++++++++++X++++++++++++++++++++++++-----
 14 -----++++++++++++++++++++++X+++++++++++++++++++++---------------
 15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------




N    W1 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
 01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
 02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
 03 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
 04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
 05 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
 06 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
 07 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
 08 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
 09 ------------+++++++++++++++++++++++X+++++++++++++++++++++++-----
 10 -------+++++++++++++++++++++++X+++++++++++++++++++++++----------
 11 -------+++++++++++++++++++++++++X++++++++++++++++++++++++-------
 12 ------+++++++++++++++++++++++++X++++++++++++++++++++++++--------
 13 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
 14 -----++++++++++++++++++++++++X+++++++++++++++++++++++-----------
 15 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----




WRDQ W0 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++X+++++++++++++++++++++------------+++++++++
 01 ++++++++++++++++++++X++++++++++++++++++++-------------++++++++++
 02 ++++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++
 03 ++++++++++++++++++++++X+++++++++++++++++++++----------++++++++++
 04 +++++++++++++++++++X++++++++++++++++++-----------------+++++++++
 05 +++++++++++++++++++X+++++++++++++++++++----------------+++++++++
 06 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
 07 ++++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++
 08 ++++++++++++++++++++X++++++++++++++++++++----------------+++++++
 09 +++++++++++++++++++++X++++++++++++++++++++----------------++++++
 10 +++++++++++++++++++X+++++++++++++++++++------------------+++++++
 11 ++++++++++++++++++++X+++++++++++++++++++------------------++++++
 12 +++++++++++++++++++++X++++++++++++++++++++-------------+++++++++
 13 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
 14 ++++++++++++++++++++X++++++++++++++++++++--------------+++++++++
 15 ++++++++++++++++++++++X+++++++++++++++++++++-------------+++++++




WRDQ W1 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ++++++++++++++++++++++X++++++++++++++++++++++------------+++++++
 01 +++++++++++++++++++++X+++++++++++++++++++++-----------++++++++++
 02 +++++++++++++++++++++X++++++++++++++++++++--------------++++++++
 03 +++++++++++++++++++++++X++++++++++++++++++++++---------+++++++++
 04 +++++++++++++++++++X++++++++++++++++++----------------++++++++++
 05 +++++++++++++++++++++X+++++++++++++++++++++------------+++++++++
 06 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
 07 +++++++++++++++++++++X+++++++++++++++++++++-------------++++++++
 08 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
 09 -++++++++++++++++++++++X+++++++++++++++++++++--------------+++++
 10 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
 11 ++++++++++++++++++++X++++++++++++++++++++----------------+++++++
 12 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
 13 +++++++++++++++++++++X++++++++++++++++++++-------------+++++++++
 14 ++++++++++++++++++X++++++++++++++++++------------------+++++++++
 15 +++++++++++++++++++++X+++++++++++++++++++++---------------++++++




WRDM W0 00000014 
WRDM W0 00000014 


WRDM W1 00000015 
WRDM W1 00000014 




ADDR 


    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ---------++++++++++++++++++++++++S++X+++++++++++++++++++++++++++


CZSL2=1
LLMB=0000C000
BP=02000000
L2Cfg=1E7AD627
L2Buf=77707711
BrCfg=F01C200E
BrMod=02800801
BrZp0=4C000000
BrZp1=00002000
#@


BCM97356B2 CFE v3.39, Endian Mode: Little
Build Date: Fri Jan 17 00:00:00 CET 2014 (root@gbquad)
Copyright (C) Broadcom Corporation.


ReShmoo MEMC0
Enabling NAND flash at CS1: K9F4G08U0A(DEVICE ID=0xECDC1095), ECC Level=15, Spare Area Size=16
MACRONIX SPI flash detected: spi_lookup_device_type, mem_type = 9e, mem_density = 16
Size = 4MB, Sector Size 65536, Page Size 256


CPU speed:            1305MHz
DDR Frequency:        800 MHz
DDR Mode:             DDR3
Total memory(MEMC 0): 1024MB
MEMC 0 DDR Width:     32
Boot Device:          SPI
Total flash:          4MB
RTS VERSION:          Initial RTS Version
ETH0_PHY:             INT
ETH0_MDIO_MODE:       1
ETH0_SPEED:           100
ETH0_PHYADDR:         0


Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub


CFE initialized.


USB: New device connected to bus 1 hub 1 port 1 
USB: Resetting device on bus 1 hub 1 port 1 USB: Locating Class 03 Vendor 4752 Product 4965: Human-Interface Device


USBHID: Unknown Configured.
 USB device matching <USB Disk> not found!
Starting splash screen.
Found splash image - Width = 720 Height = 576


Reading nandflash0.lcdsplash: Done. 116216 bytes read


Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
Loading: 0x80001000/7862272 0x80780800/128320 Entry address is 0x805ec990
Starting program at 0x805ec990


Linux version 3.3.8-2.0 (oa2@builder) (gcc version 4.8.2 (GCC) ) #1 SMP Fri Mar 7 15:08:10 CET 2014
Fetching vars from bootloader... found 15 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 1024 MB + 0 MB RAM (from CFE)
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
 memory: 30000000 @ 20000000 (usable)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00050000
Movable zone start PFN for each node
Early memory PFN ranges
    0: 0x00000000 -> 0x00010000
    0: 0x00020000 -> 0x00050000
PERCPU: Embedded 7 pages/cpu @81a09000 s6144 r8192 d14336 u32768
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584
Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=256M@512M console=ttyS0,115200n8
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
Memory: 570888k/1048576k available (6162k kernel code, 477688k reserved, 1323k data, 192k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 1305 MHz (163.128 MHz counter)
Console: colour dummy device 80x25
Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active low; overcurrent is active low
USB1: power enable is active low; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource wktmr
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.30 [Flags: R/O].
fuse init (API version 7.18)
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 1115
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
console [ttyS0] enabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
ahci strict-ahci.0: flags: ncq sntf stag clo pmp slum part 
scsi0 : ahci_platform
scsi1 : ahci_platform
scsi2 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
ata3: DUMMY
brcmstb_nand: NAND controller driver is loaded
Config internal EPHY through MDIO
eth%d: Link down
No PHY detected, not registering interface:1
bcmgenet: probe of bcmgenet.1 failed with error -5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9750423AS, 0001SDM1, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ata1.00: configured for UDMA/133
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
scsi 0:0:0:0: Direct-Access     ATA      ST9750423AS      0001 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
ata2: SATA link down (SStatus 0 SControl 300)
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
lirc_dev: IR Remote Control driver registered, major 254 
Linux video capture interface: v2.00
usbcore: registered new interface driver btusb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
lib80211: common routines for IEEE802.11 drivers
Registering the dns_resolver key type
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS1: setting up NAND flash (primary)
brcmnand.0: heuristics exception detected, Samsung K9F4G08UD
brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
nand_read_bbt: bad block at 0x00001c140000
Creating 4 MTD partitions on "brcmnand.0":
0x000001000000-0x000020000000 : "rootfs"
0x000001000000-0x000020000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
EBI CS0: setting up SPI flash
spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
m25p80 spi0.0: found mx25l3255d, expected m25p80
m25p80 spi0.0: mx25l3255d (4096 Kbytes)
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
usb 6-1: new full-speed USB device number 2 using ohci-brcm
input: HID 4752:4965 as /devices/platform/ohci-brcm.1/usb6/6-1/6-1:1.0/input/input0
generic-usb 0003:4752:4965.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 4752:4965] on usb-ohci_hcd-1/input0
input: HID 4752:4965 as /devices/platform/ohci-brcm.1/usb6/6-1/6-1:1.1/input/input1
generic-usb 0003:4752:4965.0002: input,hidraw1: USB HID v1.10 Mouse [HID 4752:4965] on usb-ohci_hcd-1/input1
UBI: max. sequence number:       593
UBI: attached mtd0 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            496 MiB
UBI: number of good PEBs:        3963
UBI: number of bad PEBs:         5
UBI: number of corrupted PEBs:   0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 3963
UBI: number of PEBs reserved for bad PEB handling: 39
UBI: max/mean erase counter: 41/28
UBI: image sequence number:  1038580511
UBI: background thread "ubi_bgt0d" started, PID 58
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   496349184 bytes (484716 KiB, 473 MiB, 3909 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root:  0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:13.
devtmpfs: mounted
Freeing unused kernel memory: 192k freed


INIT: version 2.88 booting + PATH=/sbin:/bin:/usr/sbin:/usr/bin
+ runlevel=S
+ prevlevel=N
+ umask 022
+ export PATH runlevel prevlevel
+ '[' -d /proc/1 ']'
+ mount /proc
+ . /etc/default/rcS
++ TMPTIME=0
++ SULOGIN=no
++ DELAYLOGIN=no
++ UTC=yes
++ VERBOSE=very
++ EDITMOTD=no
++ ENABLE_ROOTFS_FSCK=no
++ FSCKFIX=yes
++ VOLATILE_ENABLE_CACHE=yes
++ ROOTFS_READ_ONLY=no
+ trap : INT QUIT TSTP
+ exec /etc/init.d/rc S
+ . /etc/default/rcS
++ TMPTIME=0
++ SULOGIN=no
++ DELAYLOGIN=no
++ UTC=yes
++ VERBOSE=very
++ EDITMOTD=no
++ ENABLE_ROOTFS_FSCK=no
++ FSCKFIX=yes
++ VOLATILE_ENABLE_CACHE=yes
++ ROOTFS_READ_ONLY=no
+ export VERBOSE
+ trap : INT QUIT TSTP
+ stty onlcr
+ runlevel=S
+ '[' S '!=' '' ']'
+ runlevel=S
+ '[' S = '' ']'
+ previous=N
+ '[' N = '' ']'
+ export runlevel previous
+ '[' -d /etc/rcS.d ']'
+ PROGRESS_STATE=0
+ progress_size=33
+ case "$runlevel" in
+ first_step=0
+ progress_size=66
+ step_change=1
+ num_steps=0
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=1
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=2
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=3
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=4
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=5
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=6
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=7
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=8
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=9
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=10
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=11
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=12
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=13
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=14
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=15
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=16
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=17
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=18
+ for s in '/etc/rc$runlevel.d/[SK]*'
+ case "${s##/etc/rc$runlevel.d/S??}" in
+ num_steps=19
+ step=0
+ '[' N '!=' N ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S02banner.sh ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S02banner.sh start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S02banner.sh' start...
INIT: Running /etc/rcS.d/S02banner.sh start...
+ case "$1" in
+ trap - INT QUIT TSTP
+ scriptname=/etc/rcS.d/S02banner.sh
+ shift
+ . /etc/rcS.d/S02banner.sh
++ '[' '!' -e /dev/tty ']'
++ vtmaster=/dev/tty0
++ echo
++ echo 'Please wait: booting...'
+ startup_progress
+ step=1
+ '[' 19 '!=' 0 ']'
+ progress=3
+ '[' 3 -gt 0 -a -e /proc/progress ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S02sysfs.sh ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S02sysfs.sh start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S02sysfs.sh' start...
INIT: Running /etc/rcS.d/S02sysfs.sh start...
+ case "$1" in
+ trap - INT QUIT TSTP
+ scriptname=/etc/rcS.d/S02sysfs.sh
+ shift
+ . /etc/rcS.d/S02sysfs.sh
++ '[' -e /proc ']'
++ '[' -e /proc/mounts ']'
++ '[' -e /sys ']'
++ grep -q sysfs /proc/filesystems
++ '[' -e /sys/class ']'
++ mount -t sysfs sysfs /sys
++ '[' -e /sys/kernel/debug ']'
+ startup_progress
+ step=2
+ '[' 19 '!=' 0 ']'
+ progress=6
+ '[' 6 -gt 0 -a -e /proc/progress ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S02volatile-media.sh ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S02volatile-media.sh start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S02volatile-media.sh' start...
INIT: Running /etc/rcS.d/S02volatile-media.sh start...
+ case "$1" in
+ trap - INT QUIT TSTP
+ scriptname=/etc/rcS.d/S02volatile-media.sh
+ shift
+ . /etc/rcS.d/S02volatile-media.sh
++ mount -t tmpfs -o size=64k tmpfs /media
++ grep -v '^#' /etc/fstab
++ grep '\s/media/'
++ read LINE
++ create_point 192.168.2.100:/raid0/data/_NAS_NFS_Exports_/Musik /media/net/MusikaufNAS nfs _netdev,rw,nolock,tcp,nfsvers=3,rsize=8192,wsize=8192,timeo=30,fg,soft,intr 0 0
++ '[' '!' -d /media/net/MusikaufNAS ']'
++ mkdir -p /media/net/MusikaufNAS
++ touch /media/net/MusikaufNAS/.fstab
++ read LINE
++ create_point 192.168.2.100:/raid0/data/_NAS_NFS_Exports_/Filme /media/net/FilmeaufNAS nfs _netdev,rw,nolock,tcp,nfsvers=3,rsize=8192,wsize=8192,timeo=30,fg,soft,intr 0 0
++ '[' '!' -d /media/net/FilmeaufNAS ']'
++ mkdir -p /media/net/FilmeaufNAS
++ touch /media/net/FilmeaufNAS/.fstab
++ read LINE
++ '[' '!' -e /dev/fuse ']'
+ startup_progress
+ step=3
+ '[' 19 '!=' 0 ']'
+ progress=10
+ '[' 10 -gt 0 -a -e /proc/progress ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S03mdev ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S03mdev start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S03mdev' start...
INIT: Running /etc/rcS.d/S03mdev start...
+ case "$1" in
+ /etc/rcS.d/S03mdev start
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
+ startup_progress
+ step=4
+ '[' 19 '!=' 0 ']'
+ progress=13
+ '[' 13 -gt 0 -a -e /proc/progress ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S03mountall.sh ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S03mountall.sh start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S03mountall.sh' start...
INIT: Running /etc/rcS.d/S03mountall.sh start...
+ case "$1" in
+ trap - INT QUIT TSTP
+ scriptname=/etc/rcS.d/S03mountall.sh
+ shift
+ . /etc/rcS.d/S03mountall.sh
++ . /etc/default/rcS
+++ TMPTIME=0
+++ SULOGIN=no
+++ DELAYLOGIN=no
+++ UTC=yes
+++ VERBOSE=very
+++ EDITMOTD=no
+++ ENABLE_ROOTFS_FSCK=no
+++ FSCKFIX=yes
+++ VOLATILE_ENABLE_CACHE=yes
+++ ROOTFS_READ_ONLY=no
++ test very '!=' no
++ echo 'Mounting local filesystems...'
Mounting local filesystems...
++ mount -at nonfs,nosmbfs,noncpfs
++ test '!' -p /dev/initctl
++ kill -USR1 1
++ swapon -a
++ : exit 0
+ startup_progress
+ step=5
+ '[' 19 '!=' 0 ']'
+ progress=17
+ '[' 17 -gt 0 -a -e /proc/progress ']'
+ for i in '/etc/rc$runlevel.d/S*'
+ '[' '!' -f /etc/rcS.d/S04modutils.sh ']'
+ '[' N '!=' N ']'
+ case "$runlevel" in
+ startup /etc/rcS.d/S04modutils.sh start
+ '[' very = very ']'
+ echo 'INIT: Running /etc/rcS.d/S04modutils.sh' start...
INIT: Running /etc/rcS.d/S04modutils.sh start...
+ case "$1" in
+ trap - INT QUIT TSTP
+ scriptname=/etc/rcS.d/S04modutils.sh
+ shift
+ . /etc/rcS.d/S04modutils.sh
++ LOAD_MODULE=modprobe
++ '[' -f /proc/modules ']'
++ '[' -f /etc/modules ']'
++ '[' -d /etc/modules-load.d ']'
++ '[' -e /sbin/modprobe ']'
+++ uname -r
++ '[' '!' -f /lib/modules/3.3.8-2.0/modules.dep ']'
++ loaded_modules=' '
++ '[' very '!=' no ']'
++ echo -n 'Loading modules: '
Loading modules: ++ '[' -f /etc/modules ']'
++ '[' -d /etc/modules-load.d ']'
++ for f in '/etc/modules-load.d/*.conf'
++ process_file /etc/modules-load.d/_gbquad.conf
++ file=/etc/modules-load.d/_gbquad.conf
++ cat /etc/modules-load.d/_gbquad.conf
++ read module args
++ echo
++ case "$module" in
+++ echo
+++ grep ' dvb '
++ '[' -n '' ']'
++ '[' very '!=' no ']'
++ echo -n 'dvb '
dvb ++ eval 'modprobe dvb  >/dev/null 2>&1'
+++ modprobe dvb

Zitat von Jule_666

Leider nicht. Hab ewig oft geloggt und alles ging gut. Gerade eben ist eine Box dann wieder wie gewohnt beim Start hängen geblieben. Mit Treiber vom 18.04. Echt zum verrückt werden...

Kann ich bestätigen. Heute Nachmittag ist meine (QUAD-SAT) 3x gecracht, sogar 2x hintereinander. So eine ***eiße ... ich dachte das wär endlich Geschichte.

EDIT: Ich hab große Probleme mit dem aktuellem Image wo ja der 18.4er Treiber enthalten ist. Meine QUAD crasht mittlerweile nach jedem Boot. ... es ist einfach nur noch zum *otzen.