Thanks Thanks:  125

Umfrageergebnis anzeigen: Welche Treiber hast Du manuell installiert und wie stabil sind sie (Mehrfachn.mögl.)?

Teilnehmer
19. Du darfst bei dieser Umfrage nicht abstimmen
  • Treiber 13.2, Ergebnis: instabil (>10% Boothänger)

    1 5,26%
  • Treiber 13.2, Ergebnis: überwiegend stabil (<10% Boothänger)

    0 0%
  • Treiber 13.2, Ergebnis: 100% stabil

    8 42,11%
  • Treiber 13.3, Ergebnis: instabil (>10% Boothänger)

    1 5,26%
  • Treiber 13.3, Ergebnis: überwiegend stabil (<10% Boothänger)

    3 15,79%
  • Treiber 13.3, Ergebnis: 100% stabil

    4 21,05%
  • Treiber 14.1, Ergebnis: instabil (>10% Boothänger)

    7 36,84%
  • Treiber 14.1, Ergebnis: überwiegend stabil (<10% Boothänger)

    4 21,05%
  • Treiber 14.1, Ergebnis: 100% stabil

    0 0%
  • noch keinen

    2 10,53%
Multiple-Choice-Umfrage.
Seite 10 von 47 ErsteErste ... 8910111220 ... LetzteLetzte
Ergebnis 91 bis 100 von 470
  1. #91
    Avatar von mike99
    Registriert seit
    05.04.2013
    Ort
    Berlin
    Beiträge
    5.773
    Total Downloaded
    268,56 MB
    Total Downloaded
    268,56 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von svox Beitrag anzeigen
    Bei mir läuft es bisher auch... nur war meine Box heute komplett an und hat nicht aus Standby aufgenommen..
    Hat schon den neuen Treiber drauf!?

    Mit dem habe ich getestet. http://www.opena.tv/forum/showthread...ll=1#post49216
    Gruss Mike



    Mut@nt HD-51 - 2x DVB-C/T2, OptiCombo C/T2 USB, FreenetModul

    OSmini - 1x DVB-S und 1x DVB-C/T, OSmini Plus
    Mut@nt HD-2400 - 1x DVB-S und 3x DVB-C/T
    Toshiba 40TL838


    •   Alt Advertising

       

  2. #92

    Registriert seit
    18.06.2013
    Ort
    NRW
    Beiträge
    491
    Total Downloaded
    58,18 MB
    Total Downloaded
    58,18 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue HD Quad Plus (3x Sat JESS)
     
     
    Box 2:
    Gigablue HD Quad (3x Sat JESS)
     
     
    Box 3:
    Gigablue HD Quad (2x Sat JESS)
     
     
    Zitat Zitat von mike99 Beitrag anzeigen
    Hat schon den neuen Treiber drauf!?

    Mit dem habe ich getestet. http://www.opena.tv/forum/showthread...ll=1#post49216
    Nein, ist aber das erste was ich mache wenn ich später zu Hause bin

  3. #93
    Anfänger
    Registriert seit
    14.04.2014
    Beiträge
    29
    Total Downloaded
    4,96 MB
    Total Downloaded
    4,96 MB
    ReceiverDankeAktivitäten
    @Gundo: der "Oops", den Du in den Logs siehst, ist der Crash/kernel panic. Dabei schreibt der Kernel die CPU-Register etc. raus und versucht, moeglichst viele Infos ueber die Ursache des Absturzes zu geben (bei huskys Log ist ihm das besser gelungen inkl. Zeilenangabe). Kernel-Entwickler koennen dann manchmal herauslesen, was da genau passiert ist. Ich leider nicht. Darum waere das serial log mit den -x hilfreich, denn dann sehen wir, welcher Befehl den crash ausgeloest hat. Sollte das bei mehreren Leuten derselbe Befehl sein, waere vielleicht klar, welche Hardware da gerade versucht wird zu aktivieren etc. Und dann wuesste man, wo man suchen muss und ob der Fehler im vanilla kernel auftritt oder im treiber-Modul, also dem dvb.ko.
    GigaBlue Quad, 2x DVB-C (Kabel Deutschland), kein Sat-Empfang, OpenATV 6.0

  4. #94
    Avatar von Gundo
    Registriert seit
    15.04.2013
    Beiträge
    574
    Themenstarter
    Total Downloaded
    8,71 MB
    Total Downloaded
    8,71 MB
    ReceiverDankeAktivitäten
    Danke für die Info.

    Wenn es crasht sieht das so bei mir aus im Log:
    Code:
    ...
    INIT: version 2.88 booting
    
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    CPU 0 Unable to handle kernel paging request at virtual address 000000c0, epc == 8000f8f0, ra == 80004120
    Oops[#1]:
    Cpu 0
    $ 0   : 00000000 10100700 00000000 00030001
    $ 4   : 00000028 1f1ed001 0000000c 00000001
    $ 8   : 10100700 1000001e 8078dc80 00002000
    $12   : 00000000 0000000f 0000000f 0000001e
    $16   : 0000000c 00000029 00000000 00000000
    ...
    Wenn es nicht crasht sieht es so an dieser Stelle so aus:
    Code:
    ...
    INIT: version 2.88 booting
    
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    fb0: brcmfb frame buffer device
    input: gigablue remote control as /devices/virtual/input/input0
    DVB: registering new adapter (gbquad)
    DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2 NIM (internal))...
    DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2 NIM (internal))...
    DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))...
    DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SI))..
    ...
    Man beachte "EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)".

    Bedeutet das nun das der Crash was mit dem Device "sdb1" zu tun hat ?

    Und im Log steht weiter, ob crash oder nicht:
    Code:
    ...
    USB: Locating Class FF Vendor 0B95 Product 1790: Driver not found.
    *** Corsair  Slider 3.0        (64072 MB, lbs=512) ***
    *** Could not find a valid partition...status=00000000, ids=ee000000!
    dir: Could not init file system: File system not recognized
    *** Corsair  Slider 3.0        (64072 MB, lbs=512) ***
    *** Could not find a valid partition...status=00000000, ids=ee000000!
    dir: Could not init file system: File system not recognized
    Executing STARTUP...
    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
    Loading: 0x80001000/7862272 0x80780800/128320 Entry address is 0x805ec990
    Starting program at 0x805ec990
    ...
    /dev/sdb1: LABEL="CORSAIR_64GB" UUID="53da...03" TYPE="ext4" PARTUUID="fbc...b7a"

    Gibt´s da einen Zusammenhang ?
    Mutant HD2400 3x DVB-C ATV 5.3
    VuPlus - DUO-2 2x DVB-C ATV 4.2
    GigaBlue QUAD- 2x DVB-S ATV 5.3
    GigaBlue QUAD+ 2x DVB-C ATV 5.2

    GigaBlue 800SE- 1x DVB-S ATV 5.3

  5. #95
    Anfänger
    Registriert seit
    14.04.2014
    Beiträge
    29
    Total Downloaded
    4,96 MB
    Total Downloaded
    4,96 MB
    ReceiverDankeAktivitäten
    Eher nicht. In beiden Logs (husky und Deins) sieht man, dass das Modul dvb schon geladen wurde. Und das passiert erst im Script nach dem Mount-Script. D.h. der Fehler wird durch das dvb.ko selbst ausgeloest oder durch irgendeine Aktion in einem Script nach dem Laden des Moduls. Darum brauchen wir das -x bei allen Scripten.
    GigaBlue Quad, 2x DVB-C (Kabel Deutschland), kein Sat-Empfang, OpenATV 6.0

  6. Thanks Gundo bedankten sich
  7. #96
    Mitglied
    Registriert seit
    17.02.2014
    Beiträge
    35
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Box 1:
    VU+ Solo2 (ATV)
     
     
    Box 2:
    VU+ SoloSE (VTI)
     
     
    Box 3:
    ClarkTech et9100 (HDFreaks)
     
     
    Sind die Bootcrahes mit dem aktuellen Treiber Geschichte? Ich hatte mir vorgenommen, meine Quad nach der Rückkehr aus dem Urlaub gleich wieder zur 'Reparatur' zu schicken wegen der beiden Bugs(0BR/Bootcrash). Der 0BR-Bug ist ja anscheinend behoben. Vielleicht sollte ich der Box noch eine Chance geben?! Oder gibt es jetzt wieder Tonprobleme ähnlich wie mit dem Treiber vom August 2013?

    Gesendet von meinem GT-I9100 mit Tapatalk

  8. #97

    Registriert seit
    18.06.2013
    Ort
    NRW
    Beiträge
    491
    Total Downloaded
    58,18 MB
    Total Downloaded
    58,18 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue HD Quad Plus (3x Sat JESS)
     
     
    Box 2:
    Gigablue HD Quad (3x Sat JESS)
     
     
    Box 3:
    Gigablue HD Quad (2x Sat JESS)
     
     
    Leider nicht. Hab ewig oft geloggt und alles ging gut. Gerade eben ist eine Box dann wieder wie gewohnt beim Start hängen geblieben. Mit Treiber vom 18.04. Echt zum verrückt werden...

  9. #98
    Anfänger
    Registriert seit
    14.04.2014
    Beiträge
    29
    Total Downloaded
    4,96 MB
    Total Downloaded
    4,96 MB
    ReceiverDankeAktivitäten
    Na dann ist doch alles klar: solange man mitloggt, stuerzt die Box nicht ab
    GigaBlue Quad, 2x DVB-C (Kabel Deutschland), kein Sat-Empfang, OpenATV 6.0

  10. #99
    Avatar von husky
    Registriert seit
    05.04.2013
    Beiträge
    376
    Total Downloaded
    508,0 KB
    Total Downloaded
    508,0 KB
    ReceiverDankeAktivitäten
    Box 1:
    VU+Solo4k
     
     
    Box 2:
    DM 900 UltraHD
     
     
    Box 3:
    Xtrend ET8500
     
     
    Box 4:
    Gigablue Quad
     
     
    Box 5:
    Clarke-Tech ET9000
     
     
    Hab gestern einen Bootstopp erwischt mit erweitertem Logging:

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.04.18 10:30:50 =~=~=~=~=~=~=~=~=~=~=~=
      
    BCM73460012
    
    
    
    
    AVS 0.5.5
    
    
    BO
    
    
    AVS not found!
    
    
    
    
    M00
    SHMOO VER 1.14
    MCB
    
    
    PKID 20121012 003B6000 003B0000 041B203F 00001C00 
    
    
    S300001DB 
    000013E0 
    +00000004 
    RDLY W0 00000004 
    RDLY W1 00000004 
    
    
    RDEN W0 0000003E 
    RDEN W1 0000003F 
    
    
    RDQS W0 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
     01 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
     02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
     03 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
     04 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
     05 --------+++++++++++++++++++++++X+++++++++++++++++++++++---------
     06 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
     07 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
     08 ---------+++++++++++++++++++++++X++++++++++++++++++++++---------
     09 -----------+++++++++++++++++++++X+++++++++++++++++++++----------
     10 ---------++++++++++++++++++++++X+++++++++++++++++++++-----------
     11 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
     12 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
     13 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
     14 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
     15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------
    
    
    
    
    P    W0 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ----------++++++++++++++++++++++++X++++++++++++++++++++++++-----
     01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
     02 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
     03 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
     04 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
     05 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
     06 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
     07 ---------++++++++++++++++++++++++X++++++++++++++++++++++++------
     08 --------+++++++++++++++++++++++++X+++++++++++++++++++++++++-----
     09 -----------++++++++++++++++++++++++X++++++++++++++++++++++++----
     10 --------+++++++++++++++++++++++++X++++++++++++++++++++++++------
     11 -------++++++++++++++++++++++++X+++++++++++++++++++++++---------
     12 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
     13 ----+++++++++++++++++++++++++X++++++++++++++++++++++++----------
     14 --------+++++++++++++++++++++++X+++++++++++++++++++++++---------
     15 ---------+++++++++++++++++++++++++X+++++++++++++++++++++++++----
    
    
    
    
    N    W0 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 --------++++++++++++++++++++++++++++X+++++++++++++++++++++++++--
     01 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
     02 ---------+++++++++++++++++++++++++++X+++++++++++++++++++++++++--
     03 --------++++++++++++++++++++++++++X++++++++++++++++++++++++++---
     04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     05 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
     06 ---++++++++++++++++++++++++++X+++++++++++++++++++++++++---------
     07 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
     08 ----+++++++++++++++++++++++++X+++++++++++++++++++++++++---------
     09 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
     10 -----++++++++++++++++++++++++X++++++++++++++++++++++++----------
     11 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
     12 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
     13 --+++++++++++++++++++++++X+++++++++++++++++++++++---------------
     14 -----+++++++++++++++++++++++++X++++++++++++++++++++++++---------
     15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------
    
    
    
    
    RDQS W1 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
     01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
     02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
     03 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
     04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     05 -----------+++++++++++++++++++++++++X++++++++++++++++++++++++---
     06 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
     07 -----------+++++++++++++++++++++++X+++++++++++++++++++++++------
     08 --------+++++++++++++++++++++++X++++++++++++++++++++++----------
     09 -----------++++++++++++++++++++++X+++++++++++++++++++++---------
     10 --------+++++++++++++++++++++X+++++++++++++++++++++-------------
     11 ----------+++++++++++++++++++++++X+++++++++++++++++++++++-------
     12 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
     13 ----------++++++++++++++++++++++++X++++++++++++++++++++++++-----
     14 -----++++++++++++++++++++++X++++++++++++++++++++++--------------
     15 -----------++++++++++++++++++++++X++++++++++++++++++++++--------
    
    
    
    
    P    W1 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++--
     01 ------+++++++++++++++++++++++++++X+++++++++++++++++++++++++++---
     02 --------++++++++++++++++++++++++++X+++++++++++++++++++++++++----
     03 ---------+++++++++++++++++++++++++++X++++++++++++++++++++++++++-
     04 --++++++++++++++++++++++++++X+++++++++++++++++++++++++----------
     05 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++--
     06 ----++++++++++++++++++++++++++X++++++++++++++++++++++++++-------
     07 -------+++++++++++++++++++++++++X+++++++++++++++++++++++++------
     08 -------+++++++++++++++++++++++X+++++++++++++++++++++++----------
     09 ----------++++++++++++++++++++++X++++++++++++++++++++++---------
     10 -------++++++++++++++++++++++X+++++++++++++++++++++-------------
     11 ---------++++++++++++++++++++++++X+++++++++++++++++++++++-------
     12 -----+++++++++++++++++++++++X++++++++++++++++++++++-------------
     13 ---------+++++++++++++++++++++++++X++++++++++++++++++++++++-----
     14 -----++++++++++++++++++++++X+++++++++++++++++++++---------------
     15 ---------+++++++++++++++++++++++X+++++++++++++++++++++++--------
    
    
    
    
    N    W1 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
     01 --------++++++++++++++++++++++++X++++++++++++++++++++++++-------
     02 ----------++++++++++++++++++++++++X+++++++++++++++++++++++------
     03 ---------++++++++++++++++++++++++++X+++++++++++++++++++++++++---
     04 ----++++++++++++++++++++++++X++++++++++++++++++++++++-----------
     05 ----------+++++++++++++++++++++++++X+++++++++++++++++++++++++---
     06 ------++++++++++++++++++++++++X++++++++++++++++++++++++---------
     07 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
     08 -----++++++++++++++++++++++++++X+++++++++++++++++++++++++-------
     09 ------------+++++++++++++++++++++++X+++++++++++++++++++++++-----
     10 -------+++++++++++++++++++++++X+++++++++++++++++++++++----------
     11 -------+++++++++++++++++++++++++X++++++++++++++++++++++++-------
     12 ------+++++++++++++++++++++++++X++++++++++++++++++++++++--------
     13 -------++++++++++++++++++++++++++X++++++++++++++++++++++++++----
     14 -----++++++++++++++++++++++++X+++++++++++++++++++++++-----------
     15 -----------++++++++++++++++++++++++X+++++++++++++++++++++++-----
    
    
    
    
    WRDQ W0 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 +++++++++++++++++++++X+++++++++++++++++++++------------+++++++++
     01 ++++++++++++++++++++X++++++++++++++++++++-------------++++++++++
     02 ++++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++
     03 ++++++++++++++++++++++X+++++++++++++++++++++----------++++++++++
     04 +++++++++++++++++++X++++++++++++++++++-----------------+++++++++
     05 +++++++++++++++++++X+++++++++++++++++++----------------+++++++++
     06 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
     07 ++++++++++++++++++++++X+++++++++++++++++++++-----------+++++++++
     08 ++++++++++++++++++++X++++++++++++++++++++----------------+++++++
     09 +++++++++++++++++++++X++++++++++++++++++++----------------++++++
     10 +++++++++++++++++++X+++++++++++++++++++------------------+++++++
     11 ++++++++++++++++++++X+++++++++++++++++++------------------++++++
     12 +++++++++++++++++++++X++++++++++++++++++++-------------+++++++++
     13 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
     14 ++++++++++++++++++++X++++++++++++++++++++--------------+++++++++
     15 ++++++++++++++++++++++X+++++++++++++++++++++-------------+++++++
    
    
    
    
    WRDQ W1 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ++++++++++++++++++++++X++++++++++++++++++++++------------+++++++
     01 +++++++++++++++++++++X+++++++++++++++++++++-----------++++++++++
     02 +++++++++++++++++++++X++++++++++++++++++++--------------++++++++
     03 +++++++++++++++++++++++X++++++++++++++++++++++---------+++++++++
     04 +++++++++++++++++++X++++++++++++++++++----------------++++++++++
     05 +++++++++++++++++++++X+++++++++++++++++++++------------+++++++++
     06 ++++++++++++++++++++X+++++++++++++++++++--------------++++++++++
     07 +++++++++++++++++++++X+++++++++++++++++++++-------------++++++++
     08 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
     09 -++++++++++++++++++++++X+++++++++++++++++++++--------------+++++
     10 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
     11 ++++++++++++++++++++X++++++++++++++++++++----------------+++++++
     12 ++++++++++++++++++++X+++++++++++++++++++---------------+++++++++
     13 +++++++++++++++++++++X++++++++++++++++++++-------------+++++++++
     14 ++++++++++++++++++X++++++++++++++++++------------------+++++++++
     15 +++++++++++++++++++++X+++++++++++++++++++++---------------++++++
    
    
    
    
    WRDM W0 00000014 
    WRDM W0 00000014 
    
    
    WRDM W1 00000015 
    WRDM W1 00000014 
    
    
    
    
    ADDR 
    
    
        0000000000111111111122222222223333333333444444444455555555556666
        0123456789012345678901234567890123456789012345678901234567890123
     00 ---------++++++++++++++++++++++++S++X+++++++++++++++++++++++++++
    
    
    CZSL2=1
    LLMB=0000C000
    BP=02000000
    L2Cfg=1E7AD627
    L2Buf=77707711
    BrCfg=F01C200E
    BrMod=02800801
    BrZp0=4C000000
    BrZp1=00002000
    #@
    
    
    BCM97356B2 CFE v3.39, Endian Mode: Little
    Build Date: Fri Jan 17 00:00:00 CET 2014 (root@gbquad)
    Copyright (C) Broadcom Corporation.
    
    
    ReShmoo MEMC0
    Enabling NAND flash at CS1: K9F4G08U0A(DEVICE ID=0xECDC1095), ECC Level=15, Spare Area Size=16
    MACRONIX SPI flash detected: spi_lookup_device_type, mem_type = 9e, mem_density = 16
    Size = 4MB, Sector Size 65536, Page Size 256
    
    
    CPU speed:            1305MHz
    DDR Frequency:        800 MHz
    DDR Mode:             DDR3
    Total memory(MEMC 0): 1024MB
    MEMC 0 DDR Width:     32
    Boot Device:          SPI
    Total flash:          4MB
    RTS VERSION:          Initial RTS Version
    ETH0_PHY:             INT
    ETH0_MDIO_MODE:       1
    ETH0_SPEED:           100
    ETH0_PHYADDR:         0
    
    
    Initializing USB.
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
    
    
    CFE initialized.
    
    
    USB: New device connected to bus 1 hub 1 port 1 
    USB: Resetting device on bus 1 hub 1 port 1 USB: Locating Class 03 Vendor 4752 Product 4965: Human-Interface Device
    
    
    USBHID: Unknown Configured.
     USB device matching <USB Disk> not found!
    Starting splash screen.
    Found splash image - Width = 720 Height = 576
    
    
    Reading nandflash0.lcdsplash: Done. 116216 bytes read
    
    
    Loader:elf Filesys:raw Dev:nandflash0.kernel File: Options:(null)
    Loading: 0x80001000/7862272 0x80780800/128320 Entry address is 0x805ec990
    Starting program at 0x805ec990
    
    
    Linux version 3.3.8-2.0 (oa2@builder) (gcc version 4.8.2 (GCC) ) #1 SMP Fri Mar 7 15:08:10 CET 2014
    Fetching vars from bootloader... found 15 vars.
    Options: moca=0 sata=1 pcie=0 usb=1
    Using 1024 MB + 0 MB RAM (from CFE)
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Determined physical RAM map:
     memory: 10000000 @ 00000000 (usable)
     memory: 30000000 @ 20000000 (usable)
    bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
    bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
    Zone PFN ranges:
      Normal   0x00000000 -> 0x00050000
    Movable zone start PFN for each node
    Early memory PFN ranges
        0: 0x00000000 -> 0x00010000
        0: 0x00020000 -> 0x00050000
    PERCPU: Embedded 7 pages/cpu @81a09000 s6144 r8192 d14336 u32768
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259584
    Kernel command line:  ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=256M@512M console=ttyS0,115200n8
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    Memory: 570888k/1048576k available (6162k kernel code, 477688k reserved, 1323k data, 192k init, 0k highmem)
    Hierarchical RCU implementation.
    NR_IRQS:160
    Measuring MIPS counter frequency...
    Detected MIPS clock frequency: 1305 MHz (163.128 MHz counter)
    Console: colour dummy device 80x25
    Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 512
    SMP: Booting CPU1...
    CPU revision is: 00025a11 (Brcm4380)
    FPU revision is: 00130001
    Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
    Primary data cache 32kB, 4-way, linesize 32 bytes.
    MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
    SMP: CPU1 is running
    Brought up 2 CPUs
    devtmpfs: initialized
    NET: Registered protocol family 16
    USB0: power enable is active low; overcurrent is active low
    USB1: power enable is active low; overcurrent is active low
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    Advanced Linux Sound Architecture Driver Version 1.0.24.
    Bluetooth: Core ver 2.16
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    cfg80211: Calling CRDA to update world regulatory domain
    Switching to clocksource wktmr
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    NTFS driver 2.1.30 [Flags: R/O].
    fuse init (API version 7.18)
    SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
    msgmni has been set to 1115
    io scheduler noop registered
    io scheduler cfq registered (default)
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65) is a 16550A
    console [ttyS0] enabled
    serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
    serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
    loop: module loaded
    ahci: SSS flag set, parallel bus scan disabled
    ahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
    ahci strict-ahci.0: flags: ncq sntf stag clo pmp slum part 
    scsi0 : ahci_platform
    scsi1 : ahci_platform
    scsi2 : ahci_platform
    ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
    ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
    ata3: DUMMY
    brcmstb_nand: NAND controller driver is loaded
    Config internal EPHY through MDIO
    eth%d: Link down
    No PHY detected, not registering interface:1
    bcmgenet: probe of bcmgenet.1 failed with error -5
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata1.00: ATA-8: ST9750423AS, 0001SDM1, max UDMA/133
    ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    ata1.00: configured for UDMA/133
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    scsi 0:0:0:0: Direct-Access     ATA      ST9750423AS      0001 PQ: 0 ANSI: 5
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    ata2: SATA link down (SStatus 0 SControl 300)
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    lirc_dev: IR Remote Control driver registered, major 254 
    Linux video capture interface: v2.00
    usbcore: registered new interface driver btusb
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    ALSA device list:
      No soundcards found.
    TCP cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    lib80211: common routines for IEEE802.11 drivers
    Registering the dns_resolver key type
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS1: setting up NAND flash (primary)
    brcmnand.0: heuristics exception detected, Samsung K9F4G08UD
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    nand_read_bbt: bad block at 0x00001c140000
    Creating 4 MTD partitions on "brcmnand.0":
    0x000001000000-0x000020000000 : "rootfs"
    0x000001000000-0x000020000000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000a00000 : "mac"
    EBI CS0: setting up SPI flash
    spi_brcmstb spi_brcmstb.0: 1-lane output, 3-byte address
    m25p80 spi0.0: found mx25l3255d, expected m25p80
    m25p80 spi0.0: mx25l3255d (4096 Kbytes)
    UBI: attaching mtd0 to ubi0
    UBI: physical eraseblock size:   131072 bytes (128 KiB)
    UBI: logical eraseblock size:    126976 bytes
    UBI: smallest flash I/O unit:    2048
    UBI: VID header offset:          2048 (aligned 2048)
    UBI: data offset:                4096
    usb 6-1: new full-speed USB device number 2 using ohci-brcm
    input: HID 4752:4965 as /devices/platform/ohci-brcm.1/usb6/6-1/6-1:1.0/input/input0
    generic-usb 0003:4752:4965.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 4752:4965] on usb-ohci_hcd-1/input0
    input: HID 4752:4965 as /devices/platform/ohci-brcm.1/usb6/6-1/6-1:1.1/input/input1
    generic-usb 0003:4752:4965.0002: input,hidraw1: USB HID v1.10 Mouse [HID 4752:4965] on usb-ohci_hcd-1/input1
    UBI: max. sequence number:       593
    UBI: attached mtd0 to ubi0
    UBI: MTD device name:            "rootfs"
    UBI: MTD device size:            496 MiB
    UBI: number of good PEBs:        3963
    UBI: number of bad PEBs:         5
    UBI: number of corrupted PEBs:   0
    UBI: max. allowed volumes:       128
    UBI: wear-leveling threshold:    4096
    UBI: number of internal volumes: 1
    UBI: number of user volumes:     1
    UBI: available PEBs:             0
    UBI: total number of reserved PEBs: 3963
    UBI: number of PEBs reserved for bad PEB handling: 39
    UBI: max/mean erase counter: 41/28
    UBI: image sequence number:  1038580511
    UBI: background thread "ubi_bgt0d" started, PID 58
    UBIFS: recovery needed
    UBIFS: recovery completed
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: file system size:   496349184 bytes (484716 KiB, 473 MiB, 3909 LEBs)
    UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
    UBIFS: media format:       w4/r0 (latest is w4/r0)
    UBIFS: default compressor: lzo
    UBIFS: reserved for root:  0 bytes (0 KiB)
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 192k freed
    
    
    INIT: version 2.88 booting + PATH=/sbin:/bin:/usr/sbin:/usr/bin
    + runlevel=S
    + prevlevel=N
    + umask 022
    + export PATH runlevel prevlevel
    + '[' -d /proc/1 ']'
    + mount /proc
    + . /etc/default/rcS
    ++ TMPTIME=0
    ++ SULOGIN=no
    ++ DELAYLOGIN=no
    ++ UTC=yes
    ++ VERBOSE=very
    ++ EDITMOTD=no
    ++ ENABLE_ROOTFS_FSCK=no
    ++ FSCKFIX=yes
    ++ VOLATILE_ENABLE_CACHE=yes
    ++ ROOTFS_READ_ONLY=no
    + trap : INT QUIT TSTP
    + exec /etc/init.d/rc S
    + . /etc/default/rcS
    ++ TMPTIME=0
    ++ SULOGIN=no
    ++ DELAYLOGIN=no
    ++ UTC=yes
    ++ VERBOSE=very
    ++ EDITMOTD=no
    ++ ENABLE_ROOTFS_FSCK=no
    ++ FSCKFIX=yes
    ++ VOLATILE_ENABLE_CACHE=yes
    ++ ROOTFS_READ_ONLY=no
    + export VERBOSE
    + trap : INT QUIT TSTP
    + stty onlcr
    + runlevel=S
    + '[' S '!=' '' ']'
    + runlevel=S
    + '[' S = '' ']'
    + previous=N
    + '[' N = '' ']'
    + export runlevel previous
    + '[' -d /etc/rcS.d ']'
    + PROGRESS_STATE=0
    + progress_size=33
    + case "$runlevel" in
    + first_step=0
    + progress_size=66
    + step_change=1
    + num_steps=0
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=1
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=2
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=3
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=4
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=5
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=6
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=7
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=8
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=9
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=10
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=11
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=12
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=13
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=14
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=15
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=16
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=17
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=18
    + for s in '/etc/rc$runlevel.d/[SK]*'
    + case "${s##/etc/rc$runlevel.d/S??}" in
    + num_steps=19
    + step=0
    + '[' N '!=' N ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S02banner.sh ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S02banner.sh start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S02banner.sh' start...
    INIT: Running /etc/rcS.d/S02banner.sh start...
    + case "$1" in
    + trap - INT QUIT TSTP
    + scriptname=/etc/rcS.d/S02banner.sh
    + shift
    + . /etc/rcS.d/S02banner.sh
    ++ '[' '!' -e /dev/tty ']'
    ++ vtmaster=/dev/tty0
    ++ echo
    ++ echo 'Please wait: booting...'
    + startup_progress
    + step=1
    + '[' 19 '!=' 0 ']'
    + progress=3
    + '[' 3 -gt 0 -a -e /proc/progress ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S02sysfs.sh ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S02sysfs.sh start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S02sysfs.sh' start...
    INIT: Running /etc/rcS.d/S02sysfs.sh start...
    + case "$1" in
    + trap - INT QUIT TSTP
    + scriptname=/etc/rcS.d/S02sysfs.sh
    + shift
    + . /etc/rcS.d/S02sysfs.sh
    ++ '[' -e /proc ']'
    ++ '[' -e /proc/mounts ']'
    ++ '[' -e /sys ']'
    ++ grep -q sysfs /proc/filesystems
    ++ '[' -e /sys/class ']'
    ++ mount -t sysfs sysfs /sys
    ++ '[' -e /sys/kernel/debug ']'
    + startup_progress
    + step=2
    + '[' 19 '!=' 0 ']'
    + progress=6
    + '[' 6 -gt 0 -a -e /proc/progress ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S02volatile-media.sh ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S02volatile-media.sh start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S02volatile-media.sh' start...
    INIT: Running /etc/rcS.d/S02volatile-media.sh start...
    + case "$1" in
    + trap - INT QUIT TSTP
    + scriptname=/etc/rcS.d/S02volatile-media.sh
    + shift
    + . /etc/rcS.d/S02volatile-media.sh
    ++ mount -t tmpfs -o size=64k tmpfs /media
    ++ grep -v '^#' /etc/fstab
    ++ grep '\s/media/'
    ++ read LINE
    ++ create_point 192.168.2.100:/raid0/data/_NAS_NFS_Exports_/Musik /media/net/MusikaufNAS nfs _netdev,rw,nolock,tcp,nfsvers=3,rsize=8192,wsize=8192,timeo=30,fg,soft,intr 0 0
    ++ '[' '!' -d /media/net/MusikaufNAS ']'
    ++ mkdir -p /media/net/MusikaufNAS
    ++ touch /media/net/MusikaufNAS/.fstab
    ++ read LINE
    ++ create_point 192.168.2.100:/raid0/data/_NAS_NFS_Exports_/Filme /media/net/FilmeaufNAS nfs _netdev,rw,nolock,tcp,nfsvers=3,rsize=8192,wsize=8192,timeo=30,fg,soft,intr 0 0
    ++ '[' '!' -d /media/net/FilmeaufNAS ']'
    ++ mkdir -p /media/net/FilmeaufNAS
    ++ touch /media/net/FilmeaufNAS/.fstab
    ++ read LINE
    ++ '[' '!' -e /dev/fuse ']'
    + startup_progress
    + step=3
    + '[' 19 '!=' 0 ']'
    + progress=10
    + '[' 10 -gt 0 -a -e /proc/progress ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S03mdev ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S03mdev start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S03mdev' start...
    INIT: Running /etc/rcS.d/S03mdev start...
    + case "$1" in
    + /etc/rcS.d/S03mdev start
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    + startup_progress
    + step=4
    + '[' 19 '!=' 0 ']'
    + progress=13
    + '[' 13 -gt 0 -a -e /proc/progress ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S03mountall.sh ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S03mountall.sh start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S03mountall.sh' start...
    INIT: Running /etc/rcS.d/S03mountall.sh start...
    + case "$1" in
    + trap - INT QUIT TSTP
    + scriptname=/etc/rcS.d/S03mountall.sh
    + shift
    + . /etc/rcS.d/S03mountall.sh
    ++ . /etc/default/rcS
    +++ TMPTIME=0
    +++ SULOGIN=no
    +++ DELAYLOGIN=no
    +++ UTC=yes
    +++ VERBOSE=very
    +++ EDITMOTD=no
    +++ ENABLE_ROOTFS_FSCK=no
    +++ FSCKFIX=yes
    +++ VOLATILE_ENABLE_CACHE=yes
    +++ ROOTFS_READ_ONLY=no
    ++ test very '!=' no
    ++ echo 'Mounting local filesystems...'
    Mounting local filesystems...
    ++ mount -at nonfs,nosmbfs,noncpfs
    ++ test '!' -p /dev/initctl
    ++ kill -USR1 1
    ++ swapon -a
    ++ : exit 0
    + startup_progress
    + step=5
    + '[' 19 '!=' 0 ']'
    + progress=17
    + '[' 17 -gt 0 -a -e /proc/progress ']'
    + for i in '/etc/rc$runlevel.d/S*'
    + '[' '!' -f /etc/rcS.d/S04modutils.sh ']'
    + '[' N '!=' N ']'
    + case "$runlevel" in
    + startup /etc/rcS.d/S04modutils.sh start
    + '[' very = very ']'
    + echo 'INIT: Running /etc/rcS.d/S04modutils.sh' start...
    INIT: Running /etc/rcS.d/S04modutils.sh start...
    + case "$1" in
    + trap - INT QUIT TSTP
    + scriptname=/etc/rcS.d/S04modutils.sh
    + shift
    + . /etc/rcS.d/S04modutils.sh
    ++ LOAD_MODULE=modprobe
    ++ '[' -f /proc/modules ']'
    ++ '[' -f /etc/modules ']'
    ++ '[' -d /etc/modules-load.d ']'
    ++ '[' -e /sbin/modprobe ']'
    +++ uname -r
    ++ '[' '!' -f /lib/modules/3.3.8-2.0/modules.dep ']'
    ++ loaded_modules=' '
    ++ '[' very '!=' no ']'
    ++ echo -n 'Loading modules: '
    Loading modules: ++ '[' -f /etc/modules ']'
    ++ '[' -d /etc/modules-load.d ']'
    ++ for f in '/etc/modules-load.d/*.conf'
    ++ process_file /etc/modules-load.d/_gbquad.conf
    ++ file=/etc/modules-load.d/_gbquad.conf
    ++ cat /etc/modules-load.d/_gbquad.conf
    ++ read module args
    ++ echo
    ++ case "$module" in
    +++ echo
    +++ grep ' dvb '
    ++ '[' -n '' ']'
    ++ '[' very '!=' no ']'
    ++ echo -n 'dvb '
    dvb ++ eval 'modprobe dvb  >/dev/null 2>&1'
    +++ modprobe dvb
    VU+Solo4k / Xtrend ET 8500 / Clarke-Tech ET 9000 powered by openATV

  11. Thanks mike99, svox bedankten sich
  12. #100
    Avatar von Gundo
    Registriert seit
    15.04.2013
    Beiträge
    574
    Themenstarter
    Total Downloaded
    8,71 MB
    Total Downloaded
    8,71 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von Jule_666 Beitrag anzeigen
    Leider nicht. Hab ewig oft geloggt und alles ging gut. Gerade eben ist eine Box dann wieder wie gewohnt beim Start hängen geblieben. Mit Treiber vom 18.04. Echt zum verrückt werden...
    Kann ich bestätigen. Heute Nachmittag ist meine (QUAD-SAT) 3x gecracht, sogar 2x hintereinander. So eine ***eiße ... ich dachte das wär endlich Geschichte.

    EDIT: Ich hab große Probleme mit dem aktuellem Image wo ja der 18.4er Treiber enthalten ist. Meine QUAD crasht mittlerweile nach jedem Boot. ... es ist einfach nur noch zum *otzen.
    Geändert von Gundo (19.04.2014 um 18:23 Uhr)
    Mutant HD2400 3x DVB-C ATV 5.3
    VuPlus - DUO-2 2x DVB-C ATV 4.2
    GigaBlue QUAD- 2x DVB-S ATV 5.3
    GigaBlue QUAD+ 2x DVB-C ATV 5.2

    GigaBlue 800SE- 1x DVB-S ATV 5.3


Seite 10 von 47 ErsteErste ... 8910111220 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 12:26 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com