Thanks Thanks:  0
Ergebnis 1 bis 1 von 1
  1. #1
    Avatar von svox
    Registriert seit
    16.08.2013
    Ort
    München
    Beiträge
    556
    Total Downloaded
    16,84 MB
    Total Downloaded
    16,84 MB
    ReceiverDankeAktivitäten
    Box 1:
    ET8000
     
     
    Box 2:
    GigaBlue Quad
     
     

    Gigablue Quad Kernel Error

    Hallo,

    scheinbar geht es mal wieder los und die Quad wird zickig.

    Heute ist sie einfach mitten beim schauen einer Aufnahme abgestürzt. Crash Log war dabei 0 Byte groß.
    Jetzt gerade kam auf einmal der Spinner, Aufnahme konnte weiterhin abgespielt werden aber der Spinner ging nicht mehr weg.
    dmesg spuckte folgendes aus:
    Code:
    __clk_disable: network [0]
    bcmgenet: probe of bcmgenet.1 failed with error -5
    usbcore: registered new interface driver zd1201
    ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 A560 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    sd 0:0:0:0: [sda] 4096-byte physical blocks
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    __clk_enable: usb [1]
    bcm40nm_pm_usb_enable 00
    ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    ata2: SATA link down (SStatus 0 SControl 300)
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 1 port detected
    ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    hub 8-0:1.0: USB hub found
    hub 8-0:1.0: 1 port detected
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    i2c /dev entries driver
    usbcore: registered new interface driver btusb
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    TCP: cubic registered
    NET: Registered protocol family 17
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    Bluetooth: HIDP socket layer initialized
    Key type dns_resolver registered
    PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    EBI CS1: setting up NAND flash (primary)
    nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc
    nand: Samsung NAND 512MiB 3,3V 8-bit
    nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    nand_read_bbt: bad block at 0x000010180000
    nand_read_bbt: bad block at 0x000012d60000
    Creating 4 MTD partitions on "brcmnand.0":
    0x000000e00000-0x00001fc00000 : "rootfs"
    0x000000e00000-0x00001fc00000 : "rootfs(redundant)"
    0x000000200000-0x000000900000 : "kernel"
    0x000000900000-0x000000a00000 : "mac"
    EBI CS0: setting up SPI flash
    brcm_setup_spi_flash: can't locate SPI master
    brcm_setup_cs: can't register SPI flash (error -19)
    ubi0: default fastmap pool size: 195
    ubi0: default fastmap WL pool size: 25
    ubi0: attaching mtd0
    ubi0: attached by fastmap
    ubi0: fastmap pool size: 195
    ubi0: fastmap WL pool size: 25
    ubi0: attached mtd0 (name "rootfs", size 494 MiB)
    ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    ubi0: good PEBs: 3950, bad PEBs: 2, corrupted PEBs: 0
    ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    ubi0: max/mean erase counter: 71/43, WL threshold: 4096, image sequence number: 109910668
    ubi0: available PEBs: 0, total reserved PEBs: 3950, PEBs reserved for bad PEB handling: 78
    ubi0: background thread "ubi_bgt0d" started, PID 62
    ALSA device list:
      No soundcards found.
    UBIFS: background thread "ubifs_bgt0_0" started, PID 63
    random: nonblocking pool is initialized
    UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    UBIFS: FS size: 489492480 bytes (466 MiB, 3855 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    UBIFS: reserved for root: 0 bytes (0 KiB)
    UBIFS: media format: w4/r0 (latest is w4/r0), UUID E4BB4DF2-175C-43F9-B6AF-396288B715DC, small LPT model
    VFS: Mounted root (ubifs filesystem) on device 0:13.
    devtmpfs: mounted
    Freeing unused kernel memory: 236K (808e5000 - 80920000)
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    version: 20160301153836-14.4
    LCD: ST7775
    input: gigablue remote control as /devices/virtual/input/input0
    DVB: registering new adapter (gbquad)
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T NIM (SP8221L))...
    SGI XFS with security attributes, realtime, no debug enabled
    boxmodel: module license 'proprietary' taints kernel.
    Disabling lock debugging due to kernel taint
    __clk_enable: network [1]
    __clk_enable: enet [1]
    bcm40nm_pm_genet_enable 00
    NET: Registered protocol family 10
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    bcmgenet bcmgenet.0 eth0: link up, 100 Mbps, full duplex
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    Unhandled kernel unaligned access[#1]:
    CPU: 1 PID: 26945 Comm: enigma2 Tainted: P           O    4.0.1 #1
    task: cc5d1968 ti: cc790000 task.ti: cc790000
    $ 0   : 00000000 10008b00 808a0000 00010000
    $ 4   : cf7d9800 cc791e98 cc791eac 00000001
    $ 8   : 000183d0 00000000 801091c8 ffffffff
    $12   : 71db2da0 000183d0 00000000 7719d020
    $16   : cabfe460 cf7d9800 cabfe460 c4d78700
    $20   : cc791e60 000183d0 cc791e98 cabfe52c
    $24   : 00000000 7717e8c0                  
    $28   : cc790000 cc791d58 cc5d1968 801368c8
    Hi    : 0000114d
    Lo    : 0588b7c0
    epc   : 80148070 sb_is_blkdev_sb+0x0/0x14
        Tainted: P           O   
    ra    : 801368c8 inode_to_bdi+0x28/0x6c
    Status: 10008b03        KERNEL EXL IE 
    Cause : 00800010
    BadVA : 00000089
    PrId  : 00025a11 (Broadcom BMIPS5000)
    Modules linked in: ipv6 boxmodel(PO) xfs libcrc32c dvb(O)
    Process enigma2 (pid: 26945, threadinfo=cc790000, task=cc5d1968, tls=71dba8e0)
    Stack : 00000001 cc791dbc cc791db0 8009530c 10008b01 00000060 00000000 800b6368
              cc791de8 800834f4 77403224 00000189 cc791de8 00000000 00000000 80096764
              cc791e60 c4d78700 00000000 00000000 cc791e98 000183d0 cabfe4d0 ffffffff
              cabfe460 8018d168 cc791dbc cc5d1968 00000000 77403000 cc7e8600 00000224
              00000000 00000000 00000000 ffffffff cc791de8 cc7e8600 00000081 77403000
              ...
    Call Trace:
    [<80148070>] sb_is_blkdev_sb+0x0/0x14
    [<801368c8>] inode_to_bdi+0x28/0x6c
    [<800b6368>] __generic_file_write_iter+0x58/0x528
    [<8018d168>] ext4_file_write_iter+0x2c4/0x644
    [<80107e2c>] new_sync_write+0x94/0xec
    [<80108828>] vfs_write+0xb4/0x200
    [<80109284>] SyS_pwrite64+0xbc/0xd4
    [<80014774>] handle_sys+0x134/0x158
    
    
    
    
    Code: 27bd0018  1000fff6  00001025 <8f020089> 8f420078  3c448026  8ce04508  2c420001  27bdffe0 
    Unhandled kernel unaligned access[#2]:
    ---[ end trace d15bb83acaf067f7 ]---
    CPU: 0 PID: 26941 Comm: enigma2 Tainted: P      D    O    4.0.1 #1
    task: c4cf1450 ti: c0ba0000 task.ti: c0ba0000
    $ 0   : 00000000 10008700 808a0000 00010000
    $ 4   : cf7d9800 c0ba1e98 c0ba1eac 00000001
    $ 8   : 0851b000 00000000 801091c8 000002d0
    $12   : 6cb26da0 0851b000 00000000 7719d020
    $16   : cfb3d9d0 cf7d9800 cfb3d9d0 cc53df00
    $20   : c0ba1e60 0851b000 c0ba1e98 cfb3da9c
    $24   : 00000000 7717e8c0                  
    $28   : c0ba0000 c0ba1d58 c4cf1450 801368c8
    Hi    : 0000b436
    Lo    : 00000015
    epc   : 80148070 sb_is_blkdev_sb+0x0/0x14
        Tainted: P      D    O   
    ra    : 801368c8 inode_to_bdi+0x28/0x6c
    Status: 10008703        KERNEL EXL IE 
    Cause : 00800010
    BadVA : 00000089
    PrId  : 00025a11 (Broadcom BMIPS5000)
    Modules linked in: ipv6 boxmodel(PO) xfs libcrc32c dvb(O)
    Process enigma2 (pid: 26941, threadinfo=c0ba0000, task=c4cf1450, tls=6cb2e8e0)
    Stack : 00000001 c0ba1dbc c0ba1db0 8009530c 10008701 0002f000 00000000 800b6368
              c0ba1de8 800834f4 77403224 00000189 c0ba1de8 00000000 00000000 80096764
              c0ba1e60 cc53df00 00000000 00000000 c0ba1e98 0851b000 cfb3da40 ffffffff
              cfb3d9d0 8018d168 c0ba1dbc c4cf1450 00000000 77403000 cc7e8600 00000224
              00000000 00000000 00000000 ffffffff c0ba1de8 cc7e8600 00000081 77403000
              ...
    Call Trace:
    [<80148070>] sb_is_blkdev_sb+0x0/0x14
    [<801368c8>] inode_to_bdi+0x28/0x6c
    [<800b6368>] __generic_file_write_iter+0x58/0x528
    [<8018d168>] ext4_file_write_iter+0x2c4/0x644
    [<80107e2c>] new_sync_write+0x94/0xec
    [<80108828>] vfs_write+0xb4/0x200
    [<80109284>] SyS_pwrite64+0xbc/0xd4
    [<80014774>] handle_sys+0x134/0x158
    
    
    
    
    Code: 27bd0018  1000fff6  00001025 <3c028089> 8c424578  00441026  03e00008  2c420001  27bdffe0 
    ---[ end trace d15bb83acaf067f8 ]---
    Ist das schon bekannt?

    Image ist vom 16.05
    Geändert von svox (29.05.2016 um 23:46 Uhr)
    Meine Plugins:
    PiconsUpdater | SeriesOrganizer | MovieArchiver

    Entwickler unterstützen:

    Plugins zu entwickeln macht Spaß, kostet aber auch eine Menge Zeit.
    Kleine Spenden sind immer willkommen.






    •   Alt Advertising

       


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 09:09 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,76%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com