Thanks Thanks:  0
Ergebnis 1 bis 5 von 5
  1. #1
    Mitglied
    Registriert seit
    22.11.2013
    Beiträge
    69
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Total Downloaded
    27,34 MB
    Total Downloaded
    27,34 MB
    ReceiverDankeAktivitäten

    Crash durch Hitzeproblem ?H

    Hatte gestern plötzlich bluescreens , kann es Hitzeprobleme gegeben haben ? heute gehts wieder
    openATV Enigma2 crash log


    Code:
    crashdate=Do Jun 17 19:01:57 2021
    compiledate=Oct 27 2020
    skin=Multibox/skin.xml
    sourcedate=2020-10-26
    branch=6.4
    rev=2.8.0-22194-g89bce80
    component=enigma2, signal
    
    
    stbmodel=gigablue
    stbmodel=gbquad4k
    stbmodel=gbquad4k
    kernelcmdline=root=/dev/mmcblk0p5 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m
    nimsockets=NIM Socket 0:
    imageversion=box_type=gbquad4k
    imageissue=Welcome to openATV for %h
    
    
    
    
    x [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5631 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5632 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5632 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5632 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5632 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5633 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5633 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5633 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5634 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5634 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5634 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5634 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5635 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5635 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5635 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5636 [   ] dvb/dvb.cpp:1491 DVBChannelStateChanged [eDVBResourceManager] stop release channel timer
    19:01:39.5636 [   ] dvb/dvb.cpp:2421 getDemux [eDVBChannel] getDemux cap=01
    19:01:39.5636 [   ] dvb/dvb.cpp:1105 allocateDemux [eDVBResourceManager] allocate demux cap=01
    19:01:39.5636 [   ] dvb/epgcache.cpp:2432 startChannel [EPGCache] next update in 2 sec
    19:01:39.5636 [   ] dvb/dvb.cpp:1214 allocateDemux [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=8
    19:01:39.5636 [   ] dvb/pmt.cpp:78 channelStateChanged [eDVBServicePMTHandler] ok ... now we start!!
    19:01:39.5637 [   ] service/servicedvbstream.cpp:26 serviceEvent [eDVBServiceStream] STREAM service event 5
    19:01:39.5637 [   ] service/servicedvbstream.cpp:132 doRecord [eDVBServiceStream] try it again when we are tuned in
    19:01:39.5637 [   ] dvb/cahandler.cpp:267 registerService [eDVBCAService] new service 1:0:19:2B5C:41B:1:FFFF0000:0:0:0:
    19:01:39.5638 [   ] dvb/cahandler.cpp:285 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:19:2B5C:41B:1:FFFF0000:0:0:0:
    19:01:39.5639 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5640 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0
    19:01:39.5645 [   ] service/servicedvbstream.cpp:26 serviceEvent [eDVBServiceStream] STREAM service event 6
    19:01:39.5646 [   ] service/servicedvbstream.cpp:34 serviceEvent [eDVBServiceStream] tuned.. m_state 1 m_want_record 1
    19:01:39.5646 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5647 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18
    19:01:39.5650 [   ] dvb/demux.cpp:657 eDVBRecordStreamThread [eDVBRecordStreamThread] allocated 40 buffers of 192 kB
    19:01:39.5651 [   ] service/servicedvbstream.cpp:157 doRecord [eDVBServiceStream] start streaming...
    19:01:39.5651 [   ] service/servicedvbstream.cpp:340 recordCachedPids [eDVBServiceStream] no cached pids found
    19:01:39.5651 <   > service/servicedvbstream.cpp:210 doRecord [eDVBServiceStream] have 1 video stream(s) (13ed), and 1 audio stream(s) (13ee), and the pcr pid is 13ed, and the text pid is 13f0
    19:01:39.5652 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 0000
    19:01:39.5652 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 0012
    19:01:39.5652 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 0014
    19:01:39.5652 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13ed
    19:01:39.5653 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13ee
    19:01:39.5653 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13f0
    19:01:39.5658 [   ] base/ioprio.cpp:91 setIoPrio [setIoPrio] realtime level 7 ok
    19:01:39.5658 [   ] dvb/filepush.cpp:542 thread [eFilePushThreadRecorder] THREAD START
    19:01:39.5662 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.5663 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0
    19:01:39.7255 [   ] dvb/pmt.cpp:215 PATready [eDVBServicePMTHandler] PATready
    19:01:39.7256 [   ] dvb/pmt.cpp:226 PATready [eDVBServicePMTHandler] PAT TSID: 0x041b (1051)
    19:01:39.7256 [   ] dvb/pmt.cpp:255 PATready [eDVBServicePMTHandler] use pmtpid 13ec for service_id 2b5c
    19:01:39.7256 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.7257 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5100
    19:01:39.7261 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.7262 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=0
    19:01:39.7270 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.7271 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5130
    19:01:39.7273 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.7274 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=17
    19:01:39.8455 [   ] service/servicedvbstream.cpp:26 serviceEvent [eDVBServiceStream] STREAM service event 5
    19:01:39.8456 [   ] service/servicedvbstream.cpp:157 doRecord [eDVBServiceStream] start streaming...
    19:01:39.8456 [   ] service/servicedvbstream.cpp:340 recordCachedPids [eDVBServiceStream] no cached pids found
    19:01:39.8457 [   ] dvb/pmtparse.cpp:366 getProgramInfo [eDVBPMTParser] TODO: Fix parsing for Extension descriptor with tag: 0
    19:01:39.8461 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.8461 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1170
    19:01:39.8467 <   > service/servicedvbstream.cpp:210 doRecord [eDVBServiceStream] have 1 video stream(s) (13ed), and 2 audio stream(s) (13ee, 13ef) (13f1), and the pcr pid is 13ed, and the text pid is 13f0
    19:01:39.8468 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 0492
    19:01:39.8489 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13ec
    19:01:39.8490 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13ef
    19:01:39.8490 [   ] service/servicedvbstream.cpp:377 recordPids [eDVBServiceStream] ADD PID: 13f1
    19:01:39.8491 [   ] dvb_ci/dvbci.cpp:1031 gotPMT [eDVBCIInterfaces] gotPMT
    19:01:39.8492 [   ] dvb/cahandler.cpp:624 buildCAPMT [eDVBCAService] don't build/send the same CA PMT twice
    19:01:39.8493 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.8493 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5100
    19:01:39.9118 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.9120 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5100
    19:01:39.9902 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:39.9903 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18
    19:01:40.0338 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.0339 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5500
    19:01:40.0997 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.0998 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=300
    19:01:40.2883 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.2884 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=1400
    19:01:40.4759 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.4760 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=100
    19:01:40.6651 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.6652 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=200
    19:01:40.8519 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:40.8520 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=400
    19:01:40.9456 [   ] dvb/pmt.cpp:1006 SDTScanEvent [eDVBServicePMTHandler] sdt update done!
    19:01:41.2088 [   ] dvb/pmt.cpp:301 AITready [eDVBServicePMTHandler] AITready
    19:01:41.2089 [   ] dvb/pmt.cpp:320 AITready [eDVBServicePMTHandler] Section Length : 988, Total Section Length : 991
    19:01:41.2089 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 1
    19:01:41.2091 [   ] dvb/pmt.cpp:295 saveData [eDVBServicePMTHandler] Save Data Len : [991]
    19:01:41.2091 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:41.2092 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=2172
    19:01:41.2096 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 2
    19:01:41.2096 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 4
    19:01:41.2098 [   ] dvb/demux.cpp:90 openDemux [eDVBDemux] open demux /dev/dvb/adapter0/demux0
    19:01:41.2098 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=2172
    19:01:41.2101 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 5
    19:01:41.2102 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 20
    19:01:41.2102 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 3
    19:01:41.2103 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 35
    19:01:41.2103 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 39
    19:01:41.2103 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 192
    19:01:41.2103 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 155
    19:01:41.2103 [   ] dvb/pmt.cpp:331 AITready [eDVBServicePMTHandler] found applicaions ids >> pid : 0, orgid : 19, appid : 157
    19:01:41.2104 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[1], name[HBBTV-Start-DSMCC+Web], url[]404 Not Found
    19:01:41.2104 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[EPG], url[]404 Not Found
    19:01:41.2104 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[ARD-Text-DSMCC], url[]404 Not Found
    19:01:41.2104 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[Tagesschau], url[http://hbbtv.tagesschau.de/index.html]
    19:01:41.2104 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[Mediathek DasErste], url[http://tv.ardmediathek.de/index.html?client=daserste]
    19:01:41.2105 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[HBBTV ARD-Mediathek], url[http://tv.ardmediathek.de/index.html]
    19:01:41.2105 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[BR-Mediathek], url[]Error
    19:01:41.2105 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[Sportschau], url[http://tv.ardmediathek.de/index.html?client=sportschau]
    19:01:41.2105 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[Replay], url[]404 Not Found
    19:01:41.2105 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[Replay Test], url[]404 Not Found
    19:01:41.2106 [   ] dvb/pmt.cpp:465 AITready [eDVBServicePMTHandler] Found : control[2], name[KiKA-Player ARD], url[http://cdn.hbbtv.kika.de/player/index.php?ard=1]
    19:01:41.2106 [   ] service/servicedvbstream.cpp:26 serviceEvent [eDVBServiceStream] STREAM service event 11
    19:01:41.5719 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3842
    19:01:41.5723 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=3003
    19:01:41.5727 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18
    19:01:41.5733 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18
    19:01:41.5739 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=18
    19:01:41.5747 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5000
    19:01:41.5750 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=5000
    19:01:41.5755 [   ] base/huffman.cpp:27 huffman_read_dictionary [huffman] read.. '/usr/share/enigma2/otv_ffff0000_0001_041b.dict'
    19:01:41.5755 [   ] dvb/epgcache.cpp:1883 startEPG [eEPGCache] abort non avail OpenTV EIT reading
    19:01:41.5755 [   ] dvb/demux.cpp:286 start [eDVBSectionReader] DMX_SET_FILTER pid=57
    19:01:42.2355 [   ] dvb/pmt.cpp:477 OCready [eDVBServicePMTHandler] OCready
    19:01:48.5758 [   ] dvb/epgcache.cpp:2331 abortNonAvail [EPGCache] abort non avail netmed schedule reading
    19:01:48.5763 [   ] dvb/epgcache.cpp:2338 abortNonAvail [EPGCache] abort non avail netmed schedule other reading
    19:01:48.5764 [   ] dvb/epgcache.cpp:2347 abortNonAvail [EPGCache] abort non avail FreeSat schedule_other reading
    19:01:48.5766 [   ] dvb/epgcache.cpp:2358 abortNonAvail [EPGCache] abort non avail viasat reading
    19:01:50.6896 <   > dvb/epgcache.cpp:2637 readData [EPGCache] schedule finished(1623949310)
    
    
    19:01:51.2283 <   > dvb/epgcache.cpp:2637 readData [EPGCache] schedule other finished(1623949311)
    
    
    19:01:57.3913 [   ] dvb/streamserver.cpp:176 notifier [eDVBServiceStream] stream ref: file
    19:01:57.3914 [   ] service/service.cpp:39 eServiceReference [eServiceReference] find old format eServiceReference string
    19:01:57.3915 [   ] dvb/dvb.cpp:1412 allocateChannel [eDVBResourceManager] allocate channel.. 0000:0000
    19:01:57.3916 [   ] dvb/dvb.cpp:1415 allocateChannel [eDVBResourceManager] available channel.. 0000:0000
    19:01:57.3918 [   ] bsod.cpp:402 print_backtrace Backtrace:
    19:01:57.3920 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x8881C]
    19:01:57.3921 [   ] bsod.cpp:410 print_backtrace /lib/libc.so.6(__default_rt_sa_restorer) [0xB616E8F0]
    19:01:57.3922 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN19eDVBResourceManager15allocateChannelERK13eDVBChannelIDR7eUsePtrI11iDVBChannelEb) [0xC29D0]
    19:01:57.3954 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN21eDVBServicePMTHandler7tuneExtER20eServiceReferenceDVBR4ePtrI9iTsSourceEPKcP9eCueSheetbP11eDVBServiceNS_11serviceTypeEb) [0xF8B88]
    19:01:57.3976 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN21eDVBServicePMTHandler4tuneER20eServiceReferenceDVBiP9eCueSheetbP11eDVBServiceNS_11serviceTypeEb) [0xF9174]
    19:01:57.3978 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN17eDVBServiceStream9doPrepareEv) [0x1D1FE4]
    19:01:57.3980 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN17eDVBServiceStream5startEPKci) [0x1D2F14]
    19:01:57.3981 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN13eStreamClient8notifierEi) [0x112F78]
    19:01:57.3983 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x8CCD4]
    19:01:57.3984 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop15processOneEventElPP7_object9ePyObject) [0x8EA00]
    19:01:57.3986 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop7iterateEjPP7_object9ePyObject) [0x8EB90]
    19:01:57.3987 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(_ZN9eMainloop4pollE9ePyObjectS0_) [0x8EC6C]
    19:01:57.3989 [   ] bsod.cpp:410 print_backtrace /usr/bin/enigma2(n/a) [0x16A9F4]
    19:01:57.3989 [   ] bsod.cpp:422 handleFatalSignal -------FATAL SIGNAL


    dmesg


    Code:
    <6>[    0.000000] Booting Linux on physical CPU 0x0
    <5>[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 9.2.0 (GCC) ) #1 SMP Tue Feb 11 00:06:17 UTC 2020
    <6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
    <6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    <6>[    0.000000] Machine model: gbquad4k
    <6>[    0.000000] moving dtb from 0x0000000007624000 to 0x0000000000993790
    <6>[    0.000000] bmem: Reserved 529 MiB at 0x000000001eb00000
    <6>[    0.000000] bmem: Reserved 608 MiB at 0x000000009a000000
    <6>[    0.000000] cma: Reserved 16 MiB at 0x0000000098c00000
    <4>[    0.000000] Forcing write-allocate cache policy for SMP
    <6>[    0.000000] Memory policy: Data cache writealloc
    <7>[    0.000000] On node 0 totalpages: 524288
    <7>[    0.000000]   DMA zone: 964 pages used for memmap
    <7>[    0.000000]   DMA zone: 0 pages reserved
    <7>[    0.000000]   DMA zone: 123392 pages, LIFO batch:31
    <7>[    0.000000]   HighMem zone: 400896 pages, LIFO batch:31
    <6>[    0.000000] PERCPU: Embedded 12 pages/cpu @dd1ab000 s17164 r8192 d23796 u49152
    <7>[    0.000000] pcpu-alloc: s17164 r8192 d23796 u49152 alloc=12*4096
    <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
    <6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523324
    <5>[    0.000000] Kernel command line: root=/dev/mmcblk0p5 rootwait rw rootflags=data=journal libata.force=1:3.0G,2:3.0G,3:3.0G coherent_poll=2M vmalloc=525m bmem=529m@491m bmem=608m@2464m
    <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
    <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    <6>[    0.000000] Memory: 889512K/2097152K available (6679K kernel code, 326K rwdata, 2216K rodata, 324K init, 213K bss, 1191256K reserved, 16384K cma-reserved, 422904K highmem)
    <5>[    0.000000] Virtual kernel memory layout:
    <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    <5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    <5>[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)
    <5>[    0.000000]     lowmem  : 0xc0000000 - 0xde300000   ( 483 MB)
    <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    <5>[    0.000000]       .text : 0xc0008000 - 0xc08b8108   (8897 kB)
    <5>[    0.000000]       .init : 0xc08b9000 - 0xc090a000   ( 324 kB)
    <5>[    0.000000]       .data : 0xc090a000 - 0xc095b868   ( 327 kB)
    <5>[    0.000000]        .bss : 0xc095e000 - 0xc0993790   ( 214 kB)
    <6>[    0.000000] Hierarchical RCU implementation.
    <6>[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    <6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    <6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
    <6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde802000, parent irq: 93)
    <6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde808000, parent irq: 64)
    <6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80aa00, parent irq: 65)
    <6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80c640, parent irq: 95)
    <6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xde80e200, parent irq: 58)
    <6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
    <6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xde810380, parent IRQ(s): 3)
    <6>[    0.000000] MCP: Enabling write pairing
    <6>[    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    <6>[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
    <6>[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
    <6>[    0.000010] Switching to timer-based delay loop, resolution 37ns
    <6>[    0.000342] Console: colour dummy device 80x30
    <6>[    0.000360] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    <6>[    0.000369] pid_max: default: 32768 minimum: 301
    <6>[    0.000459] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    <6>[    0.000464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    <6>[    0.000884] CPU: Testing write buffer coherency: ok
    <6>[    0.001097] CPU0: update cpu_capacity 1024
    <6>[    0.001103] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    <6>[    0.001307] Setting up static identity map for 0x8480 - 0x84d8
    <6>[    0.004046] CPU1: update cpu_capacity 1024
    <6>[    0.004052] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    <6>[    0.004107] Brought up 2 CPUs
    <6>[    0.004119] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    <6>[    0.004123] CPU: All CPU(s) started in SVC mode.
    <6>[    0.004446] devtmpfs: initialized
    <6>[    0.013584] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    <6>[    0.013809] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
    <6>[    0.015064] NET: Registered protocol family 16
    <6>[    0.015723] DMA: preallocated 256 KiB pool for atomic coherent allocations
    <6>[    0.023163] cpuidle: using governor ladder
    <6>[    0.032173] cpuidle: using governor menu
    <6>[    0.039607] No ATAGs?
    <6>[    0.039635] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    <6>[    0.039641] hw-breakpoint: maximum watchpoint size is 8 bytes.
    <6>[    0.039857] Broadcom Brahma-B15 readahead cache at: 0xde954478
    <6>[    0.053743] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    <6>[    0.053977] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    <5>[    0.054325] SCSI subsystem initialized
    <7>[    0.054752] libata version 3.00 loaded.
    <6>[    0.054911] usbcore: registered new interface driver usbfs
    <6>[    0.054945] usbcore: registered new interface driver hub
    <6>[    0.054977] usbcore: registered new device driver usb
    <6>[    0.055031] Linux video capture interface: v2.00
    <6>[    0.055088] pps_core: LinuxPPS API ver. 1 registered
    <6>[    0.055092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    <6>[    0.055108] PTP clock support registered
    <6>[    0.055558] Advanced Linux Sound Architecture Driver Initialized.
    <6>[    0.057623] Switched to clocksource arch_sys_counter
    <5>[    0.057847] FS-Cache: Loaded
    <4>[    0.064467] thermal thermal_zone0: failed to read out thermal zone (-22)
    <6>[    0.064572] NET: Registered protocol family 2
    <6>[    0.064954] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    <6>[    0.064979] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    <6>[    0.065018] TCP: Hash tables configured (established 4096 bind 4096)
    <6>[    0.065057] UDP hash table entries: 256 (order: 1, 8192 bytes)
    <6>[    0.065069] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    <6>[    0.065163] NET: Registered protocol family 1
    <6>[    0.065412] RPC: Registered named UNIX socket transport module.
    <6>[    0.065417] RPC: Registered udp transport module.
    <6>[    0.065420] RPC: Registered tcp transport module.
    <6>[    0.065423] RPC: Registered tcp NFSv4.1 backchannel transport module.
    <7>[    0.065437] PCI: CLS 0 bytes, default 64
    <4>[    0.065764] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
    <6>[    0.065792] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
    <6>[    0.066526] futex hash table entries: 512 (order: 3, 32768 bytes)
    <5>[    0.067805] NFS: Registering the id_resolver key type
    <5>[    0.067837] Key type id_resolver registered
    <5>[    0.067842] Key type id_legacy registered
    <6>[    0.067858] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    <6>[    0.067867] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    <5>[    0.068022] FS-Cache: Netfs 'cifs' registered for caching
    <5>[    0.068069] Key type cifs.spnego registered
    <6>[    0.068185] fuse init (API version 7.23)
    <6>[    0.069074] bounce: pool size: 64 pages
    <6>[    0.069109] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    <6>[    0.069119] io scheduler noop registered
    <6>[    0.069127] io scheduler deadline registered
    <6>[    0.069139] io scheduler cfq registered (default)
    <6>[    0.069376] brcm-gisb-arb f0400000.gisb-arb: registered mem: de97c000, irqs: 261, 262
    <6>[    0.070128] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
    <6>[    0.070513] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
    <6>[    0.170693] brcm-pci f0460000.pcie: link down
    <6>[    0.170741] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
    <6>[    0.270906] brcm-pci f0490000.pcie: link down
    <6>[    0.272272] brcmstb_memc f1102000.memc-ddr: registered
    <6>[    0.272314] brcmstb_memc f1182000.memc-ddr: registered
    <6>[    0.272505] brcm-waketimer f0417580.waketimer: registered, with irq 263
    <6>[    0.272730] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    <6>[    0.273827] console [ttyS0] disabled
    <6>[    0.273856] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    <6>[    1.010619] console [ttyS0] enabled
    <6>[    1.014497] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
    <6>[    1.023810] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
    <6>[    1.036119] loop: module loaded
    <6>[    1.040146] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
    <4>[    1.047563] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
    <6>[    1.053605] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
    <6>[    1.071636] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    <6>[    1.080622] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part 
    <6>[    1.090112] scsi host0: brcm-ahci
    <6>[    1.093689] scsi host1: brcm-ahci
    <5>[    1.097166] ata1: FORCE: PHY spd limit set to 3.0Gbps
    <6>[    1.102230] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    <5>[    1.110159] ata2: FORCE: PHY spd limit set to 3.0Gbps
    <6>[    1.115221] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    <6>[    1.123156] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
    <6>[    1.130243] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
    <3>[    1.135887] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
    <4>[    1.141922] brcmstb_qspi: probe of f03e3400.spi failed with error -22
    <6>[    1.148400] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
    <4>[    1.154550] m25p80 spi32766.0: found mx25l3205d, expected m25p80
    <6>[    1.160576] m25p80 spi32766.0: mx25l3205d (4096 Kbytes)
    <5>[    1.165831] 5 ofpart partitions found on MTD device spi32766.0
    <5>[    1.171676] Creating 5 MTD partitions on "spi32766.0":
    <5>[    1.176825] 0x000000000000-0x000000100000 : "flash0.bolt"
    <5>[    1.182763] 0x000000100000-0x000000110000 : "flash0.macadr"
    <5>[    1.188787] 0x000000110000-0x000000120000 : "flash0.nvram"
    <5>[    1.194719] 0x000000120000-0x000000130000 : "flash0.devtree"
    <5>[    1.200828] 0x000000000000-0x000000400000 : "flash0"
    <6>[    1.206847] libphy: Fixed MDIO Bus: probed
    <6>[    1.211382] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    <4>[    1.217282] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
    <6>[    1.234634] ata1: SATA link down (SStatus 0 SControl 320)
    <6>[    1.240623] libphy: bcmgenet MII bus: probed
    <6>[    1.265461] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    <6>[    1.271312] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
    <6>[    1.277439] xhci-brcm: xHCI BRCM driver
    <6>[    1.296114] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    <6>[    1.301894] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    <6>[    1.309965] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
    <6>[    1.318874] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    <6>[    1.325516] hub 1-0:1.0: USB hub found
    <3>[    1.329301] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    <6>[    1.336568] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    <6>[    1.342331] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    <6>[    1.350234] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
    <6>[    1.358708] hub 2-0:1.0: USB hub found
    <6>[    1.362490] hub 2-0:1.0: 2 ports detected
    <6>[    1.366882] ehci-brcm: EHCI BRCM driver
    <6>[    1.370847] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    <6>[    1.376631] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    <6>[    1.394599] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    <6>[    1.406629] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    <6>[    1.413206] hub 3-0:1.0: USB hub found
    <6>[    1.416986] hub 3-0:1.0: 1 port detected
    <6>[    1.421162] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    <6>[    1.426930] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    <6>[    1.444869] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    <6>[    1.456624] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    <6>[    1.463179] hub 4-0:1.0: USB hub found
    <6>[    1.467017] hub 4-0:1.0: 1 port detected
    <6>[    1.471237] ohci-brcm: OHCI BRCM driver
    <6>[    1.475175] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    <6>[    1.480947] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    <6>[    1.488861] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    <6>[    1.521633] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
    <6>[    1.528348] ata2.00: ATA-11: WDC  WDS100T2B0A-00SM50, 401000WD, max UDMA/133
    <6>[    1.535416] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32)
    <6>[    1.544127] ata2.00: configured for UDMA/133
    <5>[    1.548653] scsi 1:0:0:0: Direct-Access     ATA      WDC  WDS100T2B0A 00WD PQ: 0 ANSI: 5
    <6>[    1.552903] hub 5-0:1.0: USB hub found
    <6>[    1.552921] hub 5-0:1.0: 1 port detected
    <6>[    1.553195] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    <6>[    1.553306] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    <6>[    1.553391] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    <5>[    1.584605] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    <5>[    1.592376] sd 1:0:0:0: Attached scsi generic sg0 type 0
    <5>[    1.592499] sd 1:0:0:0: [sda] Write Protect is off
    <7>[    1.592505] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    <5>[    1.592551] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    <6>[    1.608106] hub 6-0:1.0: USB hub found
    <6>[    1.608145] hub 6-0:1.0: 1 port detected
    <6>[    1.608494] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    <6>[    1.608508] ehci-pci: EHCI PCI platform driver
    <6>[    1.608558] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    <6>[    1.608568] ohci-pci: OHCI PCI platform driver
    <6>[    1.608720] usbcore: registered new interface driver usb-storage
    <6>[    1.608941] mousedev: PS/2 mouse device common for all mice
    <6>[    1.609295] i2c /dev entries driver
    <6>[    1.609909] IR NEC protocol handler initialized
    <6>[    1.609914] IR RC5(x/sz) protocol handler initialized
    <6>[    1.609918] IR RC6 protocol handler initialized
    <6>[    1.609921] IR JVC protocol handler initialized
    <6>[    1.609926] IR Sony protocol handler initialized
    <6>[    1.609930] IR SANYO protocol handler initialized
    <6>[    1.609934] IR Sharp protocol handler initialized
    <6>[    1.609938] IR MCE Keyboard/mouse protocol handler initialized
    <6>[    1.609942] IR XMP protocol handler initialized
    <6>[    1.610745] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    <6>[    1.611342] brcmstb-cpufreq f03e257c.cpu-clk-div: registered
    <6>[    1.611541] sdhci: Secure Digital Host Controller Interface driver
    <6>[    1.611542] sdhci: Copyright(c) Pierre Ossman
    <6>[    1.611547] sdhci-pltfm: SDHCI platform and OF driver helper
    <6>[    1.612923] sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
    <6>[    1.612926] sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
    <6>[    1.643625] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    <6>[    1.645813] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
    <6>[    1.645816] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
    <6>[    1.665913]  sda: sda1
    <5>[    1.666631] sd 1:0:0:0: [sda] Attached SCSI disk
    <6>[    1.668749] usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
    <6>[    1.675625] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    <6>[    1.675804] hidraw: raw HID events driver (C) Jiri Kosina
    <6>[    1.676040] usbcore: registered new interface driver usbhid
    <6>[    1.676042] usbhid: USB HID core driver
    <6>[    1.678791] Initializing XFRM netlink socket
    <6>[    1.694528] NET: Registered protocol family 10
    <6>[    1.699117] NET: Registered protocol family 17
    <6>[    1.699140] NET: Registered protocol family 15
    <5>[    1.699294] Key type dns_resolver registered
    <5>[    1.699388] Registering SWP/SWPB emulation handler
    <6>[    1.705588] ALSA device list:
    <6>[    1.705591]   No soundcards found.
    <6>[    1.708079] hub 2-2:1.0: USB hub found
    <6>[    1.708374] hub 2-2:1.0: 4 ports detected
    <6>[    1.764243] mmc1: MAN_BKOPS_EN bit is not set
    <6>[    1.770573] mmc1: new high speed MMC card at address 0001
    <6>[    1.770867] mmcblk0: mmc1:0001 004GE0 3.69 GiB 
    <6>[    1.770935] mmcblk0boot0: mmc1:0001 004GE0 partition 1 2.00 MiB
    <6>[    1.770992] mmcblk0boot1: mmc1:0001 004GE0 partition 2 2.00 MiB
    <6>[    1.773596]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
    <6>[    1.773712] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    <3>[    1.876101] EXT3-fs (mmcblk0p5): error: couldn't mount because of unsupported optional features (240)
    <4>[    1.885690] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    <6>[    1.899560] hub 4-1:1.0: USB hub found
    <6>[    1.903586] hub 4-1:1.0: 4 ports detected
    <4>[    1.940859] EXT4-fs (mmcblk0p5): warning: maximal mount count reached, running e2fsck is recommended
    <6>[    1.950361] EXT4-fs (mmcblk0p5): recovery complete
    <6>[    1.956094] EXT4-fs (mmcblk0p5): mounted filesystem with journalled data mode. Opts: data=journal
    <6>[    1.965012] VFS: Mounted root (ext4 filesystem) on device 179:5.
    <6>[    1.971933] devtmpfs: mounted
    <6>[    1.975072] Freeing unused kernel memory: 324K (c08b9000 - c090a000)
    <6>[    2.121697] usb 2-2.4: new SuperSpeed USB device number 3 using xhci-brcm
    <6>[    2.184338] usb-storage 2-2.4:1.0: USB Mass Storage device detected
    <6>[    2.190881] scsi host2: usb-storage 2-2.4:1.0
    <4>[    2.221297] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    <6>[    2.236149] Adding 539644k swap on /dev/mmcblk0p10.  Priority:-1 extents:1 across:539644k SS
    <6>[    3.715499] EXT4-fs (sda1): recovery complete
    <6>[    3.720445] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    <6>[    4.191933] SGI XFS with security attributes, realtime, no debug enabled
    <6>[    4.611371] EXT4-fs (mmcblk0p5): re-mounted. Opts: nodelalloc,data=journal
    <5>[    4.749014] scsi 2:0:0:0: Direct-Access              USB DISK 3.0     PMAP PQ: 0 ANSI: 6
    <5>[    4.758854] sd 2:0:0:0: Attached scsi generic sg1 type 0
    <5>[    4.764797] sd 2:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB)
    <5>[    4.779194] sd 2:0:0:0: [sdb] Write Protect is off
    <7>[    4.784055] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
    <3>[    4.790700] sd 2:0:0:0: [sdb] No Caching mode page found
    <3>[    4.796074] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    <6>[    4.810717]  sdb: sdb1
    <5>[    4.818089] sd 2:0:0:0: [sdb] Attached SCSI removable disk
    <5>[    5.158968] random: dd urandom read with 61 bits of entropy available
    <4>[    5.244395] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    <4>[    6.170880] nexus: module license 'Proprietary' taints kernel.
    <4>[    6.176755] Disabling lock debugging due to kernel taint
    <4>[    6.200392] nexus driver initialized
    <6>[    6.256774] nexus.ko: virtual irq: enabled (273)
    <6>[    6.261501] nexus.ko: shared gpio banks: enabled
    <4>[    7.266439] version: 20200723104807-u171
    <4>[    7.681939] LCD: R61509V
    <5>[    7.733480] random: nonblocking pool is initialized
    <6>[    8.005121] input: gigablue remote control as /devices/virtual/input/input0
    <6>[    8.016719] DVB: registering new adapter (_gigablue_)
    <6>[    8.188080] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.233102] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.241628] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.252904] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.264130] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.290149] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.298678] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[    8.311918] dvb dvb.0: DVB: registering adapter 0 frontend 0 (DVB-S2X NIM(45308X FBC))...
    <6>[   10.275961] dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-T2/C NIM (TT3L10))...
    <6>[   10.284696] dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-T2/C NIM (TT3L10))...
    <6>[   11.359656] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    <6>[   11.369080] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    <6>[   11.376332] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    <6>[   13.373760] bcmgenet f0b00000.ethernet eth0: Link is Down
    <6>[   14.570566] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
    <6>[   14.578813] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    <7>[   34.789566] BTHID bthid_init: ++
    <7>[   34.794119] BTHID bthid_init: --
    <6>[   34.808646] usbcore: registered new interface driver btusb
    Geändert von laptan (18.06.2021 um 13:22 Uhr) Grund: Log Text in Code gesetzt

    •   Alt Advertising

       

  2. #2
    Senior Mitglied
    Registriert seit
    07.10.2018
    Beiträge
    1.412
    Thanks (gegeben)
    370
    Thanks (bekommen)
    262
    Total Downloaded
    419,2 KB
    Total Downloaded
    419,2 KB
    ReceiverDankeAktivitäten
    hallo

    Hat die Box unter Menü - Information eine Temperatur Anzeige ?

    gruss

  3. #3
    Mitglied
    Registriert seit
    22.11.2013
    Beiträge
    69
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    27,34 MB
    Total Downloaded
    27,34 MB
    ReceiverDankeAktivitäten
    Ja 61 Grad

  4. #4
    Mitglied Avatar von hjoerg
    Registriert seit
    07.10.2017
    Beiträge
    72
    Thanks (gegeben)
    36
    Thanks (bekommen)
    15
    Total Downloaded
    56,89 MB
    Total Downloaded
    56,89 MB
    ReceiverDankeAktivitäten
    Box 1:
    Gigablue UHD Quad 4K +DVB-T2s
     
     
    Lt. crash.log wohl eher die Umsetzung der hbbtv Fehler.

    Laß es einfach.
    OpenHDF 6.5 / OpenATV 6.4
    GigaBlue UHD Quad 4K
    LNB Megasat Diavolo Unicable

  5. #5
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    17.918
    Thanks (gegeben)
    3102
    Thanks (bekommen)
    5513
    Total Downloaded
    595,11 MB
    Total Downloaded
    595,11 MB
    ReceiverDankeAktivitäten
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    E4HD ZGemma H7/H9 SF8008
     
     
    Box 5:
    diverse andere . . .
     
     
    Das ist kein Crash wegen Hitzeproblem, sondern lediglich ein steinaltes Image mit Bugs, die längst beseitigt sind.
    Meine Quad4K sind noch bei 80° ohne Crash gelaufen. Die Boxen gehen auch in südliche Länder, in denen es deutlich wärmer als bei uns ist. Meine Boxen stehen auch im Turm, und beheizen sich gegenseitig.
    Geändert von Papi2000 (09.07.2021 um 08:10 Uhr) Grund: typo
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ teamBlue
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,Philips65OLED865,Tosh40xyz
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----




Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 09:05 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2021 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 6,25%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com