Ergebnis 21 bis 30 von 47
-
29.08.2020, 14:10 #21
- Registriert seit
- 20.12.2016
- Beiträge
- 1.520
- Thanks (gegeben)
- 399
- Thanks (bekommen)
- 1065
- Total Downloaded
- 39,16 MB
- Total Downloaded
- 39,16 MB
Box 1:SF8008 - oATV 7.4 - oATV 7.5 DevelBox 2:Duo2 - oATV 7.3Box 3:HD2400 - oATV 6.3 (+6.4 all arch feed)Box 4:LX3 - oATV 6.3Box 5:Raspberrypi3 TvHeadend TBS5520SEHow did you confirm it is a T230 and not T230C? Via usb VID:PID?
At linuxtvwiki, both version use 0572:c688. See under driver support section. I think the driver is loaded depending on these VID:PID and both use the same, but use different drivers for demod and tuner.
And your VTi log states
This says it is T330 and not T230 nor T230C.Code:DVBSky T330 USB Stick
So I would suggest looking for dvbsky or cxusb. But I'am really confused.
Do you install the same driver on your uno4k like zero4k where it is working?
Last but not least you can stick with VTi where it is working on uno4k and uno4kse.
-
Advertising
-
29.08.2020, 14:41 #22Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
No!
I have MyGica T230 from GeniaTech Stick not T230C. T230C is new model from MyGica (with HEVC!). I have T230 (not T230C with H264 MPEG4!).
Is working od Vu+ Zero 4K on every image like here on page toturial on OpenPli:
Instalacion Adaptador tdt/cable/usb Mygica T230 – Boxtvmania
Stick Vu+ Turbo SE from Vu+ is a clone T330 DVB-Sky and using the same drivers on VTi like DVB-Sky T330 but on Open ATV and others image not working. Have the same problem like MyGica T230 Geniatech.
I'm testing just Vu+ Turbo SE to see is that working on Open ATV and as you see Vu+ Trubo SE (chip the same like DVBSky T330!) have the same problem with driver feeds T330 like MyGica T230 have with they drivers gnieatech t230 form feeds.
The models are diffrents but using the same file "dvb-demod-si2168-b40-01.fw" on driver to DVB-T/T2.
Now I testing too diffrents usb tuners: MyGica T230 and Vu+ Turbo SE (DVBSky T330!). The using diffrents drivers but problem with file "dvb-demod-si2168-b40-01.fw" is the same.
Vu+ Trubo SE is working fine only on image orginal Vu+ and VTi. not working on Open ATV and others image.
MyGica T230 working in image Open ATV, PurE2, OpenPli on Vu+ Zero 4K (on VTi not workind!) but not working on others models Vu+ 4K. I testem on Vu+ Uno 4K and Vu+ Uno 4K SE. That is a problem with driver.
Sorry, I messed up a bit.
But let's focus on the T230 because this one belongs to me and the tuner Vu + Trubo SE I borrowed from a friend who uses it on Vu + Uno 4K SE on the Vti image. Vu + Trubo SE does not belong to me, but tests it because it is from the same family of DVBSky tuners as MyGica T230. That's why I borrowed it for testing to check if it will work on Open ATV on my Vu + Uno 4K. As you can see, it has the same driver problem as MyGica T230.
Look at here are the all model DVBSky Stick DVB-T2/C tuners:
".. SPDX-License-Identifier: GPL-2.0
dvb-usb-dvbsky cards list
=========================
.. tabularcolumns:: |p{7.0cm}|p{10.5cm}|
.. flat-table::
:header-rows: 1
:widths: 7 13
:stub-columns: 0
* - Card name
- USB IDs
* - DVBSky S960/S860
- 0572:6831
* - DVBSky S960CI
- 0572:960c
* - DVBSky T330
- 0572:0320 (Vu+ Trubo SE is a clone DVBSky T330!)
* - DVBSky T680CI
- 0572:680c
* - MyGica Mini DVB-T2 USB Stick T230
- 0572:c688 (This is my model Stick MyGica T230!)
* - MyGica Mini DVB-T2 USB Stick T230C
- 0572:c689
* - MyGica Mini DVB-T2 USB Stick T230C Lite
- 0572:c699
* - MyGica Mini DVB-T2 USB Stick T230C v2
- 0572:c68a
* - TechnoTrend TT-connect CT2-4650 CI
- 0b48:3012
* - TechnoTrend TT-connect CT2-4650 CI v1.1
- 0b48:3015
* - TechnoTrend TT-connect S2-4650 CI
- 0b48:3017
* - TechnoTrend TVStick CT2-4400
- 0b48:3014
* - Terratec Cinergy S2 Rev.4
- 0ccd:0105
* - Terratec H7 Rev.4
- 0ccd:10a5"
ID tuners:
0572:c688 - MyGica T230 from GeniaTech and look that https://i.ibb.co/6HN8FHh/t01.jpg
0572:0320 - Vu+ Trubo SE/DVBSky T330 and look that https://satkurier.pl/uploads/82377.jpgGeändert von pablo211984 (29.08.2020 um 15:13 Uhr)
-
29.08.2020, 14:59 #23Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
Papi2000 I do it like you write and here is code logs from my Vu+ Uno 4K:
Still not working DVB-T/T2 - no searching singal and TV channels.Code:vuuno4k login: root root@vuuno4k:~# cd /lib/firmware root@vuuno4k:/lib/firmware# ls -ls 96 -rw-r--r-- 1 root root 95500 Jan 5 2019 as102_data1_st.hex 80 -rw-r--r-- 1 root root 81820 Jan 5 2019 as102_data2_st.hex 4 drwxr-xr-x 2 root root 4096 Jan 1 1970 bcm20705 16 -rw-r--r-- 1 root root 13576 Jan 5 2019 carl9170-1.fw 4 -rw-r--r-- 1 root root 2728 Jan 5 2019 dvb-demod-si2168-02.fw 28 -rw-r--r-- 1 root root 28656 Jan 5 2019 dvb-demod-si2168-a20-01.fw 20 -rw-r--r-- 1 root root 18888 Jan 5 2019 dvb-demod-si2168-a30-01.fw 16 -rw-r--r-- 1 root root 15827 Jan 5 2019 dvb-demod-si2168-b40-01 old.fw 12 -rw-r--r-- 1 root root 6919 Aug 29 15:54 dvb-demod-si2168-b40-01.fw 4 -rw-r--r-- 1 root root 204 Jan 5 2019 dvb-demod-si2168-d60-01.fw 4 -rw-r--r-- 1 root root 1666 Jan 5 2019 dvb-tuner-si2141-a10-01.fw 8 -rw-r--r-- 1 root root 5015 Jan 5 2019 dvb-tuner-si2158-a20-01.fw 44 -rw-r--r-- 1 root root 41514 Jan 5 2019 dvb-usb-af9035-01.fw 44 -rw-r--r-- 1 root root 41411 Jan 5 2019 dvb-usb-af9035-02.fw 8 -rw-r--r-- 1 root root 8128 Jan 5 2019 dvb-usb-it9135-01.fw 8 -rw-r--r-- 1 root root 5817 Jan 5 2019 dvb-usb-it9135-02.fw 8 -rw-r--r-- 1 root root 5731 Jan 5 2019 dvb-usb-it9137-01.fw 72 -rw-r--r-- 1 root root 72992 Jan 5 2019 htc_7010.fw 52 -rw-r--r-- 1 root root 51272 Jan 5 2019 htc_9271.fw 8 -rw-r--r-- 1 root root 8192 Jan 5 2019 rt2870.bin 4 -rw-r--r-- 1 root root 2048 Jan 5 2019 rt73.bin 4 drwxr-xr-x 2 root root 4096 Jan 1 1970 rtlwifi 4 drwxr-xr-x 2 root root 4096 Jan 1 1970 zd1211 root@vuuno4k:/lib/firmware#Geändert von pablo211984 (29.08.2020 um 15:11 Uhr)
-
29.08.2020, 15:01 #24Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
Code:[ 2.637054] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state. [ 2.884507] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 2.896689] DVB: registering new adapter (Mygica T230 DVB-T/T2/C) [ 2.916683] i2c i2c-0: Added multiplexed i2c bus 1 [ 2.921524] si2168 0-0064: Silicon Labs Si2168 successfully attached [ 2.941202] si2157 1-0060: Silicon Labs Si2147/2148/2157/Si2158 successfully attached [ 2.949131] usb 3-1: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 2.960110] input: IR-receiver inside an USB DVB receiver as /devices/rdb.3/f0470300.ehci_v2/usb3/3-1/input/input1 [ 2.972329] dvb-usb: schedule remote query interval to 100 msecs. [ 2.978628] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected. [ 2.986766] usbcore: registered new interface driver dvb_usb_cxusb [ 3.011486] usb 4-1: dvb_usb_af9035: prechip_version=00 chip_version=03 chip_type=3802 [ 3.021374] usb 4-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in cold state [ 3.030975] usb 4-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw' [ 3.345598] usb 4-1: dvb_usb_af9035: firmware version=12.5.13.0 [ 3.351558] usb 4-1: dvb_usb_v2: found a 'Asus U3100Mini Plus' in warm state [ 3.361292] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 3.371073] DVB: registering new adapter (Asus U3100Mini Plus) [ 3.390112] i2c i2c-2: af9033: firmware version: LINK=12.5.13.0 OFDM=6.8.13.0 [ 3.402706] usb 4-1: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))... [ 3.467365] i2c i2c-2: fc2580: FCI FC2580 successfully identified [ 3.485101] usb 4-1: dvb_usb_v2: 'Asus U3100Mini Plus' successfully initialized and connected [ 3.493888] usbcore: registered new interface driver dvb_usb_af9035 [ 3.545554] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal [ 4.593651] procmk_init [ 4.599420] bcm_event: module license 'Proprietary' taints kernel. [ 4.605639] Disabling lock debugging due to kernel taint [ 7.876807] DVB: registering new adapter (_vuplus_uno4k_) [ 8.104954] bcm7252s: hotplug_callback(): [ 8.104954] Hotplug - status.connected 0:0:0 [ 8.126947] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $ [ 8.258990] [MPVR]: >> misc_pvr_init [ 8.267770] [VID]: 6bcm7335_video_init [ 8.357329] [AUD]: 6bcm7335_audio_init [ 8.362329] [AUD]: >> bcm_audio_capture_init [ 8.373016] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2881800 state=d1cf8800 config=bf7a59d8 [ 8.405256] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.413729] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4b6e000 state=d26a9800 config=bf7a59e0 [ 8.437291] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.459540] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4b6e800 state=d26a9000 config=bf7a59e8 [ 8.488123] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.504178] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d35b4000 state=d1cf8000 config=bf7a59f0 [ 8.530343] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.538987] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d48c9400 state=d342f800 config=bf7a59f8 [ 8.568227] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.578157] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d48eb000 state=d342f000 config=bf7a5a00 [ 8.603326] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.611693] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2804c00 state=d23c9800 config=bf7a5a08 [ 8.640788] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.649388] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2804400 state=d23c9000 config=bf7a5a10 [ 8.674175] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.682611] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9 [ 8.709582] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704 [ 8.717288] BKNI_Malloc(linuxkernel) top users: [ 8.717288] blocks, bytes, filename:line [ 8.726311] 1086, 235440, BSEAV/lib/utils/balloc.c:31 [ 8.773511] input: dreambox advanced remote control (native) as /devices/virtual/input/input2 [ 8.798512] [LCD]: registered [ 8.808284] [CI]: registered ci0 [ 8.820791] [CI]: CI interface initialised [ 8.820791] [ 8.836311] [DFP]: registered dbox fp [ 8.845020] [SC]: registered sci0 [ 10.292948] system_time_set wakeup mode get [ 10.357001] system_time_set wakeup mode get 0xc4 [ 10.637145] [VID]: VIDEO_SET_STREAMTYPE 0 [ 10.641351] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 10.645657] [VID]: VIDEO_PLAY 1 2 0 [ 10.654708] [VID]: VIDEO_CONTINUE 1 1 [ 10.658569] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 10.920954] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1 [ 10.932265] f0b00000.ethernet: configuring instance for internal PHY [ 10.934051] [VID]: VIDEO_STOP 0 1 [ 10.942263] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.942539] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 12.934043] libphy: f0b00000.etherne:01 - Link is Down [ 14.817146] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full [ 14.823191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 18.720126] Bluetooth: Core ver 2.18 [ 18.724265] NET: Registered protocol family 31 [ 18.728743] Bluetooth: HCI device and connection manager initialized [ 18.735157] Bluetooth: HCI socket layer initialized [ 18.740063] Bluetooth: L2CAP socket layer initialized [ 18.745165] Bluetooth: SCO socket layer initialized [ 20.476511] [VID]: VIDEO_SET_STREAMTYPE 0 [ 20.480708] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 20.485014] [VID]: VIDEO_PLAY 1 2 0 [ 20.494192] [VID]: VIDEO_CONTINUE 1 1 [ 20.498081] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 20.772683] [VID]: VIDEO_STOP 0 1 [ 20.777163] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 21.255851] si2168 0-0064: found a 'Silicon Labs Si2168' in cold state [ 21.263355] si2168 0-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 21.442975] si2168 0-0064: firmware download failed=-110 [ 21.458096] si2157 1-0060: found a 'Silicon Labs Si2157/Si2158' in cold state [ 21.465965] si2157 1-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw' [ 22.805901] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)... [ 22.880182] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)... [ 22.899826] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 22.951317] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.004636] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.062743] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.113222] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.172652] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.223371] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.281694] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 26.968880] [AUD]: AUDIO_SET_MUTE 0 [ 26.972966] [AUD]: AUDIO_SET_MIXER -761618808 [ 26.977443] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [ 26.982525] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [ 26.989165] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 34.121224] [AUD]: AUDIO_SET_MIXER -761618808 [ 34.125740] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [ 34.130822] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 34.137820] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 34.638594] FE tune [ 35.229933] [AUD]: AUDIO_SELECT_SOURCE 0 [ 35.234466] [AUD]: AUDIO_SET_BYPASS_MODE 1 [ 35.238930] [AUD]: downmix 0 state : 0 [ 35.243157] [AUD]: AUDIO_PAUSE 0 [ 35.246626] [AUD]: AUDIO_PLAY 0 decoder start : 0 [ 35.253122] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 35.257860] [VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720 [ 35.264608] [VID]: VIDEO_GET_SIZE aspect: 1 3 [ 35.269152] [VID]: VIDEO_SET_STREAMTYPE 1 [ 35.273464] [VID]: VIDEO_FREEZE 0 0 [ 35.277441] [VID]: VIDEO_PLAY 0 5 2 [ 35.288250] [VID]: VIDEO_SLOWMOTION 0 1 [ 35.293453] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 35.298988] [VID]: VIDEO_CONTINUE 0 1 [ 35.304165] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd1045900 [ 35.310742] [AUD]: Mute : 0 [ 35.314965] [AUD]: AUDIO_CHANNEL_SELECT 0 [ 52.353457] [VID]: VIDEO_STOP 1 1 [ 52.357535] [AUD]: AUDIO_STOP 0 [ 52.385383] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0 [ 52.389822] [AUD]: AUDIO_CONTINUE aph=0 0 0 [ 59.556368] [AUD]: AUDIO_SELECT_SOURCE 0 [ 59.561436] [AUD]: AUDIO_SET_BYPASS_MODE 1 [ 59.565772] [AUD]: downmix 0 state : 0 [ 59.569682] [AUD]: AUDIO_PAUSE 0 [ 59.573082] [AUD]: AUDIO_PLAY 0 decoder start : 0 [ 59.578987] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 59.583398] [VID]: VIDEO_SET_STREAMTYPE 1 [ 59.587827] [VID]: VIDEO_FREEZE 0 0 [ 59.591807] [VID]: VIDEO_PLAY 0 5 2 [ 59.602216] [VID]: VIDEO_SLOWMOTION 0 1 [ 59.607688] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 59.613153] [VID]: VIDEO_CONTINUE 0 1 [ 59.618338] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd11c1080 [ 59.624723] [AUD]: Mute : 0 [ 59.635250] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [ 59.641120] [VID]: VIDEO_GET_SIZE aspect: 1 0 root@vuuno4k:~#
-
29.08.2020, 15:13 #25
- Registriert seit
- 20.04.2013
- Beiträge
- 24.938
- Thanks (gegeben)
- 4700
- Thanks (bekommen)
- 9129
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .VU Turbo uses perhaps the firmwarefile /lib/firmware/Vuplus_Turbo_USB_0101.fw, which i see in every image for the Zero4K. In oATV this file is missing.
You could extract the file from oPLi7.3 or VTi14 with 7-Zip on a pc. But that's for the other stick.
Sorry - no more ideas from my side.Geändert von Papi2000 (29.08.2020 um 15:36 Uhr)
Grüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
29.08.2020, 15:14 #26Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
My tuner DVB-T2/C Stick is MyGica T230:
https://i.ibb.co/6HN8FHh/t01.jpg
https://i.ibb.co/fxTbsXN/t02.jpg
https://i.ibb.co/jktfNj9/t03.jpg
https://i.ibb.co/RDVPfYf/t04.jpgGeändert von pablo211984 (29.08.2020 um 15:18 Uhr)
-
29.08.2020, 15:23 #27Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
Yes I see this file in firmware VTi and here I upload on mega.go.nz:
https://mega.nz/file/nVlQyaZa#GZDsCU...m4uSIv_HdDnWss
But when I coped this file to Open ATV it's means that Vu+ Turbo SE will works?
I need first to instal drivers from DVBSky T330 to my Open ATV on Vu+ Uno 4K?
Is this file from Vu+ Turbo SE I can use to driver MyGica T230 and will works?Geändert von pablo211984 (29.08.2020 um 15:26 Uhr)
-
29.08.2020, 15:38 #28
- Registriert seit
- 20.04.2013
- Beiträge
- 24.938
- Thanks (gegeben)
- 4700
- Thanks (bekommen)
- 9129
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .Yes, driver and as depend the kernelmodule must be installed. and no, that driver for the VU will not bring the T230 to run. Sorry for the OffTopic.
Grüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
29.08.2020, 20:38 #29Anfänger
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Themenstarter
Hello!
It's working Mygica T230 and Vu+ Trubo SE vel. DVBSky T330!
Problem was with firmware "dvb-demod-si2168-b40-01.fw" on above tuners.
Just replace this files frimware from here:
Index of /linux/v4l-dvb/firmware/Si2168/Si2168-B40
Exactly this version was needed for the replacement from here:
Index of /linux/v4l-dvb/firmware/Si2168/Si2168-B40/d8da7ff67cd56cd8aa4e101aea45e052
Mygica T230 working fine and very good! :-)
Vu+ Trubo SE is working on driver geniatech t230 very good too and is showing as DVBSky T330 :-)
Ofcorse working fine too with driver from feeds dvbsky t330 but need replace file "dvb-demod-si2168-b40-01.fw".
So every person how wont's to using MyGica T230 GeniaTech oraz Vu+ Tubo SE/ DVBSky T330 on Open ATV or other image need do it replace this files i have working tuner DVB-T2/C Combo :-)Geändert von pablo211984 (29.08.2020 um 20:48 Uhr)
-
Danke - 1 Thanks
4l3x2k bedankten sich
-
29.08.2020, 20:54 #30
- Registriert seit
- 20.12.2016
- Beiträge
- 1.520
- Thanks (gegeben)
- 399
- Thanks (bekommen)
- 1065
- Total Downloaded
- 39,16 MB
- Total Downloaded
- 39,16 MB
Box 1:SF8008 - oATV 7.4 - oATV 7.5 DevelBox 2:Duo2 - oATV 7.3Box 3:HD2400 - oATV 6.3 (+6.4 all arch feed)Box 4:LX3 - oATV 6.3Box 5:Raspberrypi3 TvHeadend TBS5520SEGreat!
Would be nice to see some checksum like md5 on the firmware file.
The conclusion is that the firmware for si2168 frontend (demod) and driver cxusb (by crazycat) with kernel 3.14.28 is Index of /linux/v4l-dvb/firmware/Si2168/Si2168-B40/d8da7ff67cd56cd8aa4e101aea45e052 ?!
Zitieren
Lesezeichen