Ergebnis 11 bis 20 von 47
-
29.08.2020, 10:40 #11
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHere rest of code logs Vu+ Trubo SE/DVBSky T330:
Code:"[ 2.737035] usb 4-1: dvb_usb_v2: found a 'DVBSky T330' in warm state [ 2.743954] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ 2.753448] DVB: registering new adapter (DVBSky T330) [ 2.762256] usb 4-1: dvb_usb_v2: MAC address: 00:cc:10:a5:33:0c [ 2.783462] i2c i2c-0: Added multiplexed i2c bus 1 [ 2.788282] si2168 0-0064: Silicon Labs Si2168 successfully attached [ 2.804252] si2157 1-0060: Silicon Labs Si2147/2148/2157/Si2158 successfully attached [ 2.812186] usb 4-1: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)... [ 2.821173] Registered IR keymap rc-dvbsky [ 2.828580] input: DVBSky T330 as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0/input0 [ 2.839131] rc0: DVBSky T330 as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0 [ 2.846501] usb 4-1: dvb_usb_v2: schedule remote query interval to 300 msecs [ 2.853591] usb 4-1: dvb_usb_v2: 'DVBSky T330' successfully initialized and connected [ 2.861730] usbcore: registered new interface driver dvb_usb_dvbsky [ 2.909438] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal [ 3.951514] procmk_init [ 3.957280] bcm_event: module license 'Proprietary' taints kernel. [ 3.963498] Disabling lock debugging due to kernel taint [ 7.240807] DVB: registering new adapter (_vuplus_uno4k_) [ 7.469009] bcm7252s: hotplug_callback(): [ 7.469009] Hotplug - status.connected 0:0:0 [ 7.491001] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $ [ 7.636041] [MPVR]: >> misc_pvr_init [ 7.641427] [VID]: 6bcm7335_video_init [ 7.737970] [AUD]: 6bcm7335_audio_init [ 7.744802] [AUD]: >> bcm_audio_capture_init [ 7.756076] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d32be400 state=d2704800 config=bf7659d8 [ 7.800243] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.808245] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3904c00 state=d26ea000 config=bf7659e0 [ 7.837973] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.847778] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3904400 state=d24ca800 config=bf7659e8 [ 7.873715] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.883725] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2c3fc00 state=d24ca000 config=bf7659f0 [ 7.907078] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.918034] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2c3f400 state=d2592800 config=bf7659f8 [ 7.944472] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.952516] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3909c00 state=d2592000 config=bf765a00 [ 7.980959] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 7.991789] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3909400 state=d2704000 config=bf765a08 [ 8.020589] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.028826] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4ae1c00 state=d2cd5800 config=bf765a10 [ 8.052487] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)... [ 8.060430] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9 [ 8.089196] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704 [ 8.097186] BKNI_Malloc(linuxkernel) top users: [ 8.097186] blocks, bytes, filename:line [ 8.106220] 1086, 235440, BSEAV/lib/utils/balloc.c:31 [ 8.156151] input: dreambox advanced remote control (native) as /devices/virtual/input/input1 [ 8.174230] [LCD]: registered [ 8.182347] [CI]: registered ci0 [ 8.196980] [CI]: CI interface initialised [ 8.196980] [ 8.210305] [DFP]: registered dbox fp [ 8.222456] [SC]: registered sci0 [ 9.674013] system_time_set wakeup mode get [ 9.738005] system_time_set wakeup mode get 0xc4 [ 9.938579] [VID]: VIDEO_SET_STREAMTYPE 0 [ 9.944974] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 9.953378] [VID]: VIDEO_PLAY 1 2 0 [ 9.962803] [VID]: VIDEO_CONTINUE 1 1 [ 9.966694] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 10.240010] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1 [ 10.242008] [VID]: VIDEO_STOP 0 1 [ 10.242930] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 10.258932] f0b00000.ethernet: configuring instance for internal PHY [ 10.265362] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.260110] libphy: f0b00000.etherne:01 - Link is Down [ 14.357899] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full [ 14.364028] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.755877] Bluetooth: Core ver 2.18 [ 17.760360] NET: Registered protocol family 31 [ 17.764855] Bluetooth: HCI device and connection manager initialized [ 17.771289] Bluetooth: HCI socket layer initialized [ 17.776530] Bluetooth: L2CAP socket layer initialized [ 17.781657] Bluetooth: SCO socket layer initialized [ 19.508202] [VID]: VIDEO_SET_STREAMTYPE 0 [ 19.512675] [VID]: VIDEO_SELECT_SOURCE 1 0 [ 19.517486] [VID]: VIDEO_PLAY 1 2 0 [ 19.526409] [VID]: VIDEO_CONTINUE 1 1 [ 19.530284] [VID]: VIDEO_CLEAR_BUFFER 1 1 0 [ 19.805081] [VID]: VIDEO_STOP 0 1 [ 19.809539] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 20.004618] si2168 0-0064: found a 'Silicon Labs Si2168' in cold state [ 20.012765] si2168 0-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 20.237364] si2168 0-0064: firmware download failed=-110 [ 20.301410] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (vtuner fe)... [ 20.312342] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.365425] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.417576] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.476892] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.528093] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.585225] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.635727] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.696437] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 23.798175] [AUD]: AUDIO_SET_MUTE 0 [ 23.802195] [AUD]: AUDIO_SET_MIXER -767828344 [ 23.806680] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [ 23.811765] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0 [ 23.818410] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 28.409718] [AUD]: AUDIO_SET_MIXER -767828344 [ 28.414248] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0 [ 28.419428] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 28.426445] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70 [ 28.798470] FE tune [ 29.425961] [AUD]: AUDIO_SELECT_SOURCE 0 [ 29.430692] [AUD]: AUDIO_SET_BYPASS_MODE 1 [ 29.435039] [AUD]: downmix 0 state : 0 [ 29.439327] [AUD]: AUDIO_PAUSE 0 [ 29.442779] [AUD]: AUDIO_PLAY 0 decoder start : 0 [ 29.449131] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 29.453512] [VID]: VIDEO_GET_SIZE src w: 1280 h:720 display w:1280 h:720 [ 29.460492] [VID]: VIDEO_GET_SIZE aspect: 1 3 [ 29.464962] [VID]: VIDEO_SET_STREAMTYPE 1 [ 29.469220] [VID]: VIDEO_FREEZE 0 0 [ 29.473093] [VID]: VIDEO_PLAY 0 5 2 [ 29.481898] [VID]: VIDEO_SLOWMOTION 0 1 [ 29.486094] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 29.490906] [VID]: VIDEO_CONTINUE 0 1 [ 29.494860] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd10bcf80 [ 29.499846] [AUD]: Mute : 0 [ 29.502736] [AUD]: AUDIO_CHANNEL_SELECT 0 [ 29.773041] [VID]: VIDEO_SLOWMOTION 0 1 [ 29.777442] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 29.782068] [VID]: VIDEO_CONTINUE 0 1 [ 29.786018] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd10bcf80 [ 29.791013] [AUD]: Mute : 0 [ 61.044849] [VID]: VIDEO_STOP 1 1 [ 61.048588] [AUD]: AUDIO_STOP 0 [ 61.076542] [AUD]: AUDIO_CONTINUE 0 0 aph=0x0 [ 61.080935] [AUD]: AUDIO_CONTINUE aph=0 0 0 [ 67.895768] FE tune [ 68.165545] [AUD]: AUDIO_SELECT_SOURCE 0 [ 68.170371] [AUD]: AUDIO_SET_BYPASS_MODE 1 [ 68.175294] [AUD]: downmix 0 state : 0 [ 68.179411] [AUD]: AUDIO_PAUSE 0 [ 68.182876] [AUD]: AUDIO_PLAY 0 decoder start : 0 [ 68.189239] [VID]: VIDEO_SELECT_SOURCE 0 0 [ 68.193837] [VID]: VIDEO_SET_STREAMTYPE 1 [ 68.198303] [VID]: VIDEO_FREEZE 0 0 [ 68.202100] [VID]: VIDEO_PLAY 0 5 2 [ 68.211025] [VID]: VIDEO_SLOWMOTION 0 1 [ 68.220918] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 68.225695] [VID]: VIDEO_CONTINUE 0 1 [ 68.233902] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd10bc900 [ 68.238920] [AUD]: Mute : 0 [ 68.250272] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0 [ 68.256208] [VID]: VIDEO_GET_SIZE aspect: 1 0 [ 68.440890] [VID]: VIDEO_SLOWMOTION 0 1 [ 68.445256] [VID]: VIDEO_FAST_FORWARD 0 1 0 [ 68.449849] [VID]: VIDEO_CONTINUE 0 1 [ 68.453762] [AUD]: AUDIO_CONTINUE 0 1 aph=0xd10bc900 [ 68.458752] [AUD]: Mute : 0 root@vuuno4k:~#"
-
Advertising
-
29.08.2020, 10:43 #12
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterSee this?;
Code:"[ 20.004618] si2168 0-0064: found a 'Silicon Labs Si2168' in cold state [ 20.012765] si2168 0-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 20.237364] si2168 0-0064: firmware download failed=-110 "
That means that in Open ATV every preson how gonna use DVB-T tuners from list:
" * - Card name
- USB IDs
* - DVBSky S960/S860
- 0572:6831
* - DVBSky S960CI
- 0572:960c
* - DVBSky T330
- 0572:0320
* - DVBSky T680CI
- 0572:680c
* - MyGica Mini DVB-T2 USB Stick T230
- 0572:c688
* - MyGica Mini DVB-T2 USB Stick T230C
- 0572:c689
* - MyGica Mini DVB-T2 USB Stick T230C Lite
- 0572:c699
* - MyGica Mini DVB-T2 USB Stick T230C v2
- 0572:c68a
* - TechnoTrend TT-connect CT2-4650 CI
- 0b48:3012
* - TechnoTrend TT-connect CT2-4650 CI v1.1
- 0b48:3015
* - TechnoTrend TT-connect S2-4650 CI
- 0b48:3017
* - TechnoTrend TVStick CT2-4400
- 0b48:3014
* - Terratec Cinergy S2 Rev.4
- 0ccd:0105
* - Terratec H7 Rev.4
- 0ccd:10a5"
Will have this problem - no signal and now searching TV channels from DVB-T/T2!
Vu+ Trubo SE will not works on Open ATV like MyGica T230 and DVBSky T330 and others Stick.
Fixes are needed in drivers for Open ATV and other images because OpenPli, PurE2 has the same problem as Open ATV.
I check Vu+ Trubo SE on Vu+ orginal image and it's worsk fine and no problem.
I check on VTi and it's works fine and no problem.Geändert von pablo211984 (29.08.2020 um 11:00 Uhr)
-
29.08.2020, 10:51 #13
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHere are logs from VTi on my Vu+ Uno 4K and Vu+ Trubo SE it's works fine:
Code:root@vuuno4k:~# esmeg -sh: esmeg: command not found root@vuuno4k:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.28-1.12 (vti@build-vti) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Feb 25 14:51:11 CET 2020 [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: UNO4K [ 0.000000] moving dtb from 0x0000000007628000 to 0x000000000086889c [ 0.000000] bmem: Reserved 637 MiB at 0x0000000017f00000 [ 0.000000] bmem: Reserved 637 MiB at 0x0000000097f00000 [ 0.000000] cma: Reserved 16 MiB at 0x0000000016400000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] Normal zone: 750 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 96000 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3346 pages used for memmap [ 0.000000] HighMem zone: 428288 pages, LIFO batch:31 [ 0.000000] MCP: Enabling write pairing [ 0.000000] PERCPU: Embedded 8 pages/cpu @d75bd000 s8896 r8192 d15680 u32768 [ 0.000000] pcpu-alloc: s8896 r8192 d15680 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523538 [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=633m bmem=637m@383m bmem=637m@2431m [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 742300K/2097152K available (5886K kernel code, 323K rwdata, 1916K rodata, 252K init, 190K bss, 1338468K reserved, 16384K cma-reserved, 400376K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd7800000 - 0xff000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd7700000 ( 375 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07a6d80 (7804 kB) [ 0.000000] .init : 0xc07a7000 - 0xc07e62c0 ( 253 kB) [ 0.000000] .data : 0xc07e8000 - 0xc0838d40 ( 324 kB) [ 0.000000] .bss : 0xc0838d48 - 0xc086889c ( 191 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95) [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58) [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt). [ 0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns [ 0.000010] Switching to timer-based delay loop [ 0.000239] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000) [ 0.000248] pid_max: default: 32768 minimum: 301 [ 0.000339] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.006064] CPU: Testing write buffer coherency: ok [ 0.006256] CPU0: update cpu_power 1024 [ 0.006262] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.006434] Setting up static identity map for 0x59aef8 - 0x59af50 [ 0.008785] CPU1: Booted secondary processor [ 0.008805] CPU1: update cpu_power 1024 [ 0.008808] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008878] Brought up 2 CPUs [ 0.008888] SMP: Total of 2 processors activated. [ 0.008892] CPU: All CPU(s) started in SVC mode. [ 0.009286] devtmpfs: initialized [ 0.012535] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0 [ 0.013545] regulator-dummy: no parameters [ 0.013748] NET: Registered protocol family 16 [ 0.014600] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.015244] cpuidle: using governor ladder [ 0.015249] cpuidle: using governor menu [ 0.017766] irq: no irq domain found for /rdb/interrupt-controller@f040a700 ! [ 0.017904] irq: no irq domain found for /rdb/interrupt-controller@f0417380 ! [ 0.021038] irq: no irq domain found for /rdb/interrupt-controller@f03e1a00 ! [ 0.021306] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered [ 0.021452] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered [ 0.021593] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered [ 0.021727] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered [ 0.021859] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered [ 0.022019] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered [ 0.022163] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered [ 0.022297] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered [ 0.022425] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered [ 0.022552] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered [ 0.022680] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered [ 0.022812] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered [ 0.023453] irq: no irq domain found for /rdb/interrupt-controller@f0417380 ! [ 0.023953] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered [ 0.024092] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered [ 0.024384] No ATAGs? [ 0.024403] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.024408] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.024571] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478 [ 0.038001] bio: create slab <bio-0> at 0 [ 0.038886] SCSI subsystem initialized [ 0.039097] libata version 3.00 loaded. [ 0.039478] usbcore: registered new interface driver usbfs [ 0.039554] usbcore: registered new interface driver hub [ 0.039644] usbcore: registered new device driver usb [ 0.039765] Linux video capture interface: v2.00 [ 0.039978] pps_core: LinuxPPS API ver. 1 registered [ 0.039983] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.040043] PTP clock support registered [ 0.040597] Advanced Linux Sound Architecture Driver Initialized. [ 0.041613] cfg80211: Calling CRDA to update world regulatory domain [ 0.042087] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT [ 0.042271] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT [ 0.142602] brcm-pci f0460000.pcie: link down [ 0.242864] brcm-pci f0490000.pcie: link down [ 0.242910] Switched to clocksource arch_sys_counter [ 0.243100] FS-Cache: Loaded [ 0.244717] thermal thermal_zone0: failed to read out thermal zone 0 [ 0.244789] NET: Registered protocol family 2 [ 0.245192] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.245213] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.245252] TCP: Hash tables configured (established 4096 bind 4096) [ 0.245282] TCP: reno registered [ 0.245288] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.245298] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.245404] NET: Registered protocol family 1 [ 0.245591] RPC: Registered named UNIX socket transport module. [ 0.245597] RPC: Registered udp transport module. [ 0.245600] RPC: Registered tcp transport module. [ 0.245603] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.245609] PCI: CLS 0 bytes, default 64 [ 0.245835] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available [ 0.246929] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.247571] bounce pool size: 64 pages [ 0.248114] NFS: Registering the id_resolver key type [ 0.248145] Key type id_resolver registered [ 0.248149] Key type id_legacy registered [ 0.248159] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.248163] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.248529] msgmni has been set to 699 [ 0.249228] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.249235] io scheduler noop registered [ 0.249239] io scheduler deadline registered [ 0.249255] io scheduler cfq registered (default) [ 0.249459] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259 [ 0.265479] brcm-waketimer f0417580.waketimer: registered, with irq 260 [ 0.265776] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.267096] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A [ 1.049328] console [ttyS0] enabled [ 1.053222] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A [ 1.062549] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A [ 1.074767] loop: module loaded [ 1.078542] ahci brcmstb-ahci.0: can't get clock [ 1.083256] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled [ 1.100927] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.109557] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part [ 1.119062] scsi0 : ahci_platform [ 1.122708] scsi1 : ahci_platform [ 1.126255] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91 [ 1.134188] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91 [ 1.143394] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address [ 1.149799] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated [ 1.157124] m25p80 spi32766.0: found mx25l3255e, expected m25p80 [ 1.163158] m25p80 spi32766.0: mx25l3255e (4096 Kbytes) [ 1.168414] 5 ofpart partitions found on MTD device spi32766.0 [ 1.174258] Creating 5 MTD partitions on "spi32766.0": [ 1.179410] 0x000000000000-0x000000200000 : "flash0.bolt" [ 1.185505] 0x000000200000-0x000000210000 : "flash0.macadr" [ 1.191695] 0x000000210000-0x000000220000 : "flash0.nvram" [ 1.197799] 0x000000220000-0x000000230000 : "flash0.devtree" [ 1.204082] 0x000000000000-0x000000400000 : "flash0" [ 1.210698] libphy: Fixed MDIO Bus: probed [ 1.215496] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001 [ 1.231918] libphy: bcmgenet MII bus: probed [ 1.251924] ata1: SATA link down (SStatus 0 SControl 300) [ 1.257391] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.263244] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.269703] xhci-brcm: xHCI BRCM driver [ 1.273643] xhci-brcm f0471000.xhci_v2: xHCI Host Controller [ 1.279475] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1 [ 1.287574] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000 [ 1.294311] hub 1-0:1.0: USB hub found [ 1.298091] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.305347] xhci-brcm f0471000.xhci_v2: xHCI Host Controller [ 1.311162] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2 [ 1.319461] hub 2-0:1.0: USB hub found [ 1.323241] hub 2-0:1.0: 2 ports detected [ 1.327627] ehci-brcm: EHCI BRCM driver [ 1.331567] ehci-brcm f0470300.ehci_v2: EHCI Host Controller [ 1.337397] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3 [ 1.355361] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300 [ 1.366919] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.373588] hub 3-0:1.0: USB hub found [ 1.377366] hub 3-0:1.0: 1 port detected [ 1.381496] ehci-brcm f0470500.ehci_v2: EHCI Host Controller [ 1.384924] ata2: SATA link down (SStatus 0 SControl 300) [ 1.392734] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4 [ 1.410690] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500 [ 1.421918] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00 [ 1.428641] hub 4-0:1.0: USB hub found [ 1.432419] hub 4-0:1.0: 1 port detected [ 1.436683] ohci-brcm: OHCI BRCM driver [ 1.440615] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller [ 1.446448] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5 [ 1.454327] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400 [ 1.515400] hub 5-0:1.0: USB hub found [ 1.519177] hub 5-0:1.0: 1 port detected
-
29.08.2020, 10:52 #14
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHere rest of logs code VTi:
[code]
[ 1.523312] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
[ 1.529143] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
[ 1.537022] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
[ 1.598391] hub 6-0:1.0: USB hub found
[ 1.602167] hub 6-0:1.0: 1 port detected
[ 1.606403] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.612951] ehci-pci: EHCI PCI platform driver
[ 1.617493] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.623696] ohci-pci: OHCI PCI platform driver
[ 1.628464] usbcore: registered new interface driver usb-storage
[ 1.634658] mousedev: PS/2 mouse device common for all mice
[ 1.640632] i2c /dev entries driver
[ 1.644496] IR NEC protocol handler initialized
[ 1.649044] IR RC5(x) protocol handler initialized
[ 1.653845] IR RC6 protocol handler initialized
[ 1.658383] IR JVC protocol handler initialized
[ 1.662921] IR Sony protocol handler initialized
[ 1.667547] IR RC5 (streamzap) protocol handler initialized
[ 1.673130] IR SANYO protocol handler initialized
[ 1.677844] IR MCE Keyboard/mouse protocol handler initialized
[ 1.684070] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[ 1.691862] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.697704] sdhci: Secure Digital Host Controller Interface driver
[ 1.703919] sdhci: Copyright(c) Pierre Ossman
[ 1.708292] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.715079] mmc0: no vqmmc regulator found
[ 1.719187] mmc0: no vmmc regulator found
[ 1.753919] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
[ 1.761711] usbcore: registered new interface driver usbhid
[ 1.767301] usbhid: USB HID core driver
[ 1.767954] usb 4-1: new high-speed USB device number 2 using ehci-brcm
[ 1.778450] TCP: cubic registered
[ 1.781782] NET: Registered protocol family 17
[ 1.788519] Key type dns_resolver registered
[ 1.794916] Registering SWP/SWPB emulation handler
[ 1.804163] regulator-dummy: disabling
[ 1.814428] ALSA device list:
[ 1.817418] No soundcards found.
[ 1.821055] Waiting for root device /dev/mmcblk0p4...
[ 1.867555] mmc0: BKOPS_EN bit is not set
[ 1.877805] mmc0: new high speed MMC card at address 0001
[ 1.883590] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 1.888239] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[ 1.894258] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[ 1.900298] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
[ 1.909589] mmcblk0: p1 p2 p3 p4
[ 1.915994] mmcblk0boot1: unknown partition table
[ 1.921797] mmcblk0boot0: unknown partition table
[ 1.927627] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[ 1.942608] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
[ 1.951524] VFS: Mounted root (ext4 filesystem) on device 179:4.
[ 1.961642] devtmpfs: mounted
[ 1.964723] Freeing unused kernel memory: 252K (c07a7000 - c07e6000)
[ 2.157718] udevd[639]: starting version 182
[ 2.284531] random: nonblocking pool is initialized
[ 2.352478] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[ 2.483950] usb 4-1: dvb_usb_v2_media_tree: found a 'DVBSky T330 USB Stick' in warm state
[ 2.492441] usb 4-1: dvb_usb_v2_media_tree: will pass the complete MPEG2 transport stream to the software demuxer
[ 2.502888] DVB: registering new adapter (DVBSky T330 USB Stick)
[ 2.510307] dvbsky_usb MAC address=00:cc:10:a5:33:0c
[ 2.515316] usb 4-1: dvb_usb_v2_media_tree: MAC address: 00:cc:10:a5:33:0c
[ 2.540525] usb 4-1: DVB: registering adapter 1 frontend 0 (Sit2 DVB-T2/C)...
[ 2.550282] IR keymap rc-dvbsky not found
[ 2.554342] Registered IR keymap rc-empty
[ 2.558700] input: DVBSky T330 USB Stick as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0/input0
[ 2.567983] rc0: DVBSky T330 USB Stick as /devices/rdb.3/f0470500.ehci_v2/usb4/4-1/rc/rc0
[ 2.576205] usb 4-1: dvb_usb_v2_media_tree: schedule remote query interval to 300 msecs
[ 2.584249] usb 4-1: dvb_usb_v2_media_tree: 'DVBSky T330 USB Stick' successfully initialized and connected
[ 2.594055] usbcore: registered new interface driver dvb_usb_dvbsky
[ 3.162579] procmk_init
[ 3.166161] bcm_event: module license 'Proprietary' taints kernel.
[ 3.166169] Disabling lock debugging due to kernel taint
[ 6.479129] DVB: registering new adapter (_vuplus_uno4k_)
[ 6.716925] bcm7252s: hotplug_callback():
[ 6.716925] Hotplug - status.connected 0:0:0
[ 6.731916] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[ 6.755939] [MPVR]: >> misc_pvr_init
[ 6.757421] [VID]: 6bcm7335_video_init
[ 6.819179] [AUD]: 6bcm7335_audio_init
[ 6.819374] [AUD]: >> bcm_audio_capture_init
[ 6.821942] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4875400 state=d3127000 config=bf776fd0
[ 6.835474] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.836243] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4883c00 state=d31fa800 config=bf776fd8
[ 6.845436] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.845973] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d48ea000 state=d31fa000 config=bf776fe0
[ 6.855309] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.855843] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d48e7400 state=d31fc800 config=bf776fe8
[ 6.864967] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.865490] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d487d800 state=d31fc000 config=bf776ff0
[ 6.874835] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.875380] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d4977400 state=d31ff800 config=bf776ff8
[ 6.884468] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.884989] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3921c00 state=d31ff000 config=bf777000
[ 6.894356] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.894856] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3921400 state=d3204800 config=bf777008
[ 6.904125] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
[ 6.904631] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
[ 6.920962] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
[ 6.922136] BKNI_Malloc(linuxkernel) top users:
[ 6.922136] blocks, bytes, filename:line
[ 6.922143] 1085, 235420, BSEAV/lib/utils/balloc.c:31
[ 6.941113] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
[ 6.944056] [LCD]: registered
[ 6.946957] [CI]: registered ci0
[ 6.951132] [CI]: CI interface initialised
[ 6.951132]
[ 6.957969] [DFP]: registered dbox fp
[ 6.961404] [SC]: registered sci0
[ 8.404916] system_time_set wakeup mode get
[ 8.464925] system_time_set wakeup mode get 0xc4
[ 13.656422] [VID]: VIDEO_SET_STREAMTYPE 0
[ 13.656433] [VID]: VIDEO_SELECT_SOURCE 1 0
[ 13.656477] [VID]: VIDEO_PLAY 1 2 0
[ 13.661749] [VID]: VIDEO_CONTINUE 1 1
[ 13.661757] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
[ 13.936170] [VID]: VIDEO_STOP 0 1
[ 13.937120] [VID]: VIDEO_SELECT_SOURCE 0 0
[ 14.313919] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
[ 14.317577] f0b00000.ethernet: configuring instance for internal PHY
[ 16.318014] libphy: f0b00000.etherne:01 - Link is Down
[ 18.181047] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[ 21.855203] NET: Registered protocol family 10
[ 24.700072] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Sit2 DVB-T2/C)...
[ 25.310246] [VID]: VIDEO_SET_STREAMTYPE 0
[ 25.310258] [VID]: VIDEO_SELECT_SOURCE 1 0
[ 25.310304] [VID]: VIDEO_PLAY 1 2 0
[ 25.315590] [VID]: VIDEO_CONTINUE 1 1
[ 25.315599] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
[ 25.589552] [VID]: VIDEO_STOP 0 1
[ 25.590449] [VID]: VIDEO_SELECT_SOURCE 0 0
[ 33.025948] [AUD]: AUDIO_SET_MUTE 0
[ 33.026302] [AUD]: AUDIO_SET_MIXER -756818296
[ 33.026309] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[ 33.026314] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[ 33.026318] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[ 33.192597] [AUD]: AUDIO_SET_MIXER -756818296
[ 33.192613] [AUD]: AUDIO_SET_MIXER : amixl 45, amixr 45
[ 33.192618] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[ 33.192622] [AUD]: AUDIO_SET_MIXER : next left volume -3284, right volume -3284
[ 55.944305] [AUD]: AUDIO_SET_MIXER -756818296
[ 55.944320] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[ 55.944325] [AUD]: AUDIO_SET_MIXER : next left volume -3284, right volume -3284
[ 55.944329] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[ 575.416078] [AUD]: AUDIO_SELECT_SOURCE 0
[ 575.416194] [AUD]: AUDIO_SET_BYPASS_MODE 1
[ 575.416201] [AUD]: downmix 0 state : 0
[ 575.416295] [AUD]: AUDIO_PAUSE 300088576
[ 575.416311] [AUD]: AUDIO_PLAY 300088576 decoder start : 0
[ 575.418882] [VID]: VIDEO_SELECT_SOURCE 0 0
[ 575.419226] [VID]: VIDEO_SET_STREAMTYPE 1
[ 575.420295] [VID]: VIDEO_FREEZE 300088576 0
[ 575.420318] [VID]: VIDEO_PLAY 300088576 5 2
[ 575.428444] [VID]: VIDEO_SLOWMOTION 0 1
[ 575.428507] [VID]: VIDEO_FAST_FORWARD 0 1 0
[ 575.428533] [VID]: VIDEO_CONTINUE 300088576 1
[ 575.428547] [AUD]: AUDIO_CONTINUE 300088576 1 aph=0xd328d300
[ 575.428552] [AUD]: Mute : 0
[ 575.428621] [AUD]: AUDIO_CHANNEL_SELECT 0
[ 590.536552] [VID]: VIDEO_STOP 1 1
[ 590.536604] [AUD]: AUDIO_STOP 300088576
[ 590.561015] [AUD]: AUDIO_CONTINUE 300088576 0 aph=0x0
[ 590.561024] [AUD]: AUDIO_CONTINUE aph=0 0 0
[ 591.808973] [AUD]: AUDIO_SELECT_SOURCE 0
[ 591.809052] [AUD]: AUDIO_SET_BYPASS_MODE 1
[ 591.809059] [AUD]: downmix 0 state : 0
[ 591.809157] [AUD]: AUDIO_PAUSE 300088576
[ 591.809167] [AUD]: AUDIO_PLAY 300088576 decoder start : 0
[ 591.810327] [VID]: VIDEO_SELECT_SOURCE 0 0
[ 591.810375] [VID]: VIDEO_SET_STREAMTYPE 1
[ 591.810479] [VID]: VIDEO_FREEZE 300088576 0
[ 591.810490] [VID]: VIDEO_PLAY 300088576 5 2
[ 591.816989] [VID]: VIDEO_SLOWMOTION 0 1
[ 591.817058] [VID]: VIDEO_FAST_FORWARD 0 1 0
[ 591.817082] [VID]: VIDEO_CONTINUE 300088576 1
[ 591.817095] [AUD]: AUDIO_CONTINUE 300088576 1 aph=0xd2c93880
[ 591.817099] [AUD]: Mute : 0
[ 667.205547] libphy: f0b00000.etherne:01 - Link is Down
[ 672.404763] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
[ 680.548916] libphy: f0b00000.etherne:01 - Link is Down
[ 683.738540] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
root@vuuno4k:~#[code]
-
29.08.2020, 10:56 #15
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterIs there a chance that the Open ATV Group will improve the drivers or the Open ATV system itself for these T230 / T330 USB tuners and others from the family. Without this, anyone who buys a Vu + Trubo SE / DVBSky T330 or MyGica T230 will not be able to use it on Open ATV. Can someone from the Open ATV Group improve it? Please consider fixing these errors in the drivers because it does not only apply to MyGica T230 but also the soon very popular Vu + Trubo SE which is a copy of the DVBSky T330 and uses its drivers, among others. in the VTi image.
-
29.08.2020, 12:35 #16
- Registriert seit
- 20.12.2016
- Beiträge
- 1.514
- Thanks (gegeben)
- 399
- Thanks (bekommen)
- 1058
- Total Downloaded
- 39,16 MB
- Total Downloaded
- 39,16 MB
Box 1:SF8008 - oATV 7.4 - oATV 7.5 DevelBox 2:Duo2 - oATV 7.3Box 3:HD2400 - oATV 6.3 (+6.4 all arch feed)Box 4:LX3 - oATV 6.3Box 5:Raspberrypi3 TvHeadend TBS5520SEHi,
the error did not change from -110 with that firmware file so the problem seems another.
You could try other USB port on your box.
The following looks also uncommon
Code:[ 20.312342] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.365425] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.417576] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.476892] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.528093] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.585225] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.635727] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21 [ 20.696437] BRCM brcm_dvb0: dvb_frontend_ioctl_legacy: doesn't know how to handle a DVBv3 call to delivery system 21
You could also try oATV 6.4 or 6.3.
-
29.08.2020, 12:44 #17
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHi!
On Vu+ Uno 4K I have two USB 3.0 Port and check above. The same problem.
I using on my Vu+ Uno 4K old Stick DVB-T Asus My Cinema U3100 Mini Plus and there is no problem with this Stick. DVB-T working fine and no problem.
I chceck every version image Open ATV include Open ATV 6.3 i 6.4 and version beta Open ATV 6.5. Still is the same problem.
You see that problem is not only image for Vu+ Uno 4K but Vu+ Uno 4K SE have the same problem.
Why on Vu+ Zero 4K there are no problems with this Stick's? Open ATV on Vu+ Zero 4K is working fine with T230 and T330. OpenPli and PurE2 working fine to and no problems.
Here is prove that is true on OpenPli:
Instalacion Adaptador tdt/cable/usb Mygica T230 – Boxtvmania
So why DVBSky/Vu+ Turbo SE is working fine on orginal linux Vu+ image and VTi image and not working on rest of image?
Vu+ Zerok 4K use the same driver to MyGica T230 and DVB-Sky T330 Stick. Why on Open ATV is working with Vu+ Zerok 4K but not working with Vu+ Uno 4K and Vu+ Uno 4K SE?
The same image and the same driver from feeds.
That why I'm say that problem is on image Open ATV form Vu+ Uno 4K and Vu+ Uno 4K SE. The image Vu+ Zerok 4K is good.
Is a problem that Vu+ Zerok 4K have one USB port that is ony in USB 2.0 standard and Vu+ Uno 4K and Vu+ Uno 4K SE have only two ports USB in USB 3.0 standard?
Problems with driver USB 3.0 on image for Vu+ Uno 4K and Vu+ Uno 4K SE?
On Vu+ Zero 4K is wroking because is only USB 2.0?Geändert von pablo211984 (29.08.2020 um 12:57 Uhr)
-
29.08.2020, 13:41 #18
- Registriert seit
- 20.04.2013
- Beiträge
- 24.824
- Thanks (gegeben)
- 4679
- Thanks (bekommen)
- 9077
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .Go again to /lib/firmware, and let's see "ls -ls".
Your "ls" points out, that the file "dvb-demod-si2168-b40-01.fw" is there. But it cannot be loaded, if the file has the wrong rights - it must have the rights 0644 (ftp shows you) or "-rw-r--r-- 1 root root...".
Code:cd /lib/firmware ls -la drwxr-xr-x 4 root root 4096 21. Jun 18:00 . drwxr-xr-x 8 root root 4096 21. Jun 18:02 .. -rw-r--r-- 1 root root 13576 10. Feb 2020 carl9170-1.fw -rw-r--r-- 1 root root 72992 10. Feb 2020 htc_7010.fw -rw-r--r-- 1 root root 51272 10. Feb 2020 htc_9271.fw -rw-r--r-- 1 root root 8192 10. Feb 2020 rt2870.bin -rw-r--r-- 1 root root 2048 10. Feb 2020 rt73.bin drwxr-xr-x 2 root root 4096 21. Jun 18:00 rtlwifi drwxr-xr-x 2 root root 4096 21. Jun 18:00 zd1211
Geändert von Papi2000 (29.08.2020 um 13:44 Uhr)
Grüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
Danke - 1 Thankssid12345 bedankten sich
-
29.08.2020, 14:24 #19
- Registriert seit
- 28.08.2020
- Beiträge
- 26
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHi!
Thanks for help!
Here is the code logs:
Code:vuuno4k login: root root@vuuno4k:~# cd /lib/firmware root@vuuno4k:/lib/firmware# ls -la drwxr-xr-x 5 root root 4096 Aug 29 14:16 . drwxr-xr-x 8 root root 4096 Mar 13 2019 .. -rw-r--r-- 1 root root 95500 Jan 5 2019 as102_data1_st.hex -rw-r--r-- 1 root root 81820 Jan 5 2019 as102_data2_st.hex drwxr-xr-x 2 root root 4096 Jan 1 1970 bcm20705 -rw-r--r-- 1 root root 13576 Jan 5 2019 carl9170-1.fw -rw-r--r-- 1 root root 2728 Jan 5 2019 dvb-demod-si2168-02.fw -rw-r--r-- 1 root root 28656 Jan 5 2019 dvb-demod-si2168-a20-01.fw -rw-r--r-- 1 root root 18888 Jan 5 2019 dvb-demod-si2168-a30-01.fw -rw-r--r-- 1 root root 15827 Jan 5 2019 dvb-demod-si2168-b40-01.fw -rw-r--r-- 1 root root 204 Jan 5 2019 dvb-demod-si2168-d60-01.fw -rw-r--r-- 1 root root 1666 Jan 5 2019 dvb-tuner-si2141-a10-01.fw -rw-r--r-- 1 root root 5015 Jan 5 2019 dvb-tuner-si2158-a20-01.fw -rw-r--r-- 1 root root 41514 Jan 5 2019 dvb-usb-af9035-01.fw -rw-r--r-- 1 root root 41411 Jan 5 2019 dvb-usb-af9035-02.fw -rw-r--r-- 1 root root 8128 Jan 5 2019 dvb-usb-it9135-01.fw -rw-r--r-- 1 root root 5817 Jan 5 2019 dvb-usb-it9135-02.fw -rw-r--r-- 1 root root 5731 Jan 5 2019 dvb-usb-it9137-01.fw -rw-r--r-- 1 root root 72992 Jan 5 2019 htc_7010.fw -rw-r--r-- 1 root root 51272 Jan 5 2019 htc_9271.fw -rw-r--r-- 1 root root 8192 Jan 5 2019 rt2870.bin -rw-r--r-- 1 root root 2048 Jan 5 2019 rt73.bin drwxr-xr-x 2 root root 4096 Jan 1 1970 rtlwifi drwxr-xr-x 2 root root 4096 Jan 1 1970 zd1211 root@vuuno4k:/lib/firmware#
I change the USB 3.0 port too another and is the same problem.
Name "dvb-usb-af9035" is my Asus DVB-T Stick My Cinema U3100 Mini Plus. This tuner working fine and no problem.Geändert von pablo211984 (29.08.2020 um 14:52 Uhr)
-
29.08.2020, 15:04 #20
- Registriert seit
- 20.04.2013
- Beiträge
- 24.824
- Thanks (gegeben)
- 4679
- Thanks (bekommen)
- 9077
- Total Downloaded
- 596,61 MB
- Total Downloaded
- 596,61 MB
Box 1:GB Q4K-SC / UE4K-SC / UE4K-CBox 2:GigaBlue Q-SSC / Q+-SSCBox 3:DM900uhd-SS / Vu+DuoBox 4:ZGemma H7/H9 SF8008Box 5:diverse andere . . .I have loaded the file from my link given there (Post #5 https://www.opena.tv/english-section...tml#post449627), and get another file than you have:
Code:# your file: -rw-r--r-- 1 root root 15827 Jan 5 2019 dvb-demod-si2168-b40-01.fw # my file: -rw-r--r-- 1 root root 6919 29. Aug 01:36 dvb-demod-si2168-b40-01.fw
Geändert von Papi2000 (29.08.2020 um 15:20 Uhr)
Grüßle
Ralf
---------------------------------------------
Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
Astra 19.2E UniCable & KabelBW, oATV/teamBlue
(u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----
-
Danke - 1 Thankssid12345 bedankten sich
Lesezeichen