Thanks Thanks:  0
Ergebnis 1 bis 9 von 9
  1. #1
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke

    Disabling IPv6 in OpenATV?

    How to completely disable IPv6 service in OpenATV? I'm using IP ver4 on my local network, but my router, acting as a DHCP server, still assigns an IPv6 address to my Zgemma receivers.
    I can not turn it off in the router because it is a fiber optic router from Orange and there is no such option in the setup.
    And due to the warranty, I cannot make any modifications to it. I can't even turn off DHCPv6 but I can DHCPv4. Strange but it is.
    My OpenATV version is 6.4, receirest two Zgemma H9 combo.

    •   Alt Advertising

       

  2. #2
    Mitglied
    Registriert seit
    31.12.2015
    Beiträge
    40
    Thanks (gegeben)
    31
    Thanks (bekommen)
    9
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    You need an entry echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6 in /etc/rc.local and everything is fine.

  3. #3
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    THX, will try

  4. #4
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Bout as I un
    Geändert von mackowiakp (19.07.2020 um 10:59 Uhr)

  5. #5
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    But as I understand it, commands from the rc.local file are executed after all other services are started. Including DHCPv6 client.
    Hence, in the /etc/resolv.conf file, an entry will be added to the DNSv6 server at the beginning of the file.
    And it happens even though I have a static IP configuration in both Zgemma. So this entry prevents local network name resolution for IPv4. Is there anything else to do / uninstall?

  6. #6
    Mitglied
    Registriert seit
    31.12.2015
    Beiträge
    40
    Thanks (gegeben)
    31
    Thanks (bekommen)
    9
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Why do you need "local network name resolution for IPv4", for your local network only the ARP protocol is needed?

    My STB's also have static IP's and I've no problems with DNS resolution for IPV4.

  7. #7
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    I need local network name resolution for IPv4 due to the fact that I have access to some devices both via the Internet and from the local network.
    Of course, the IP addresses are different in both cases.
    And I want, for example, in the iPad applications to use the same domain names both in the LAN and during the connection via the Internet.
    Geändert von mackowiakp (19.07.2020 um 12:12 Uhr)

  8. #8
    Mitglied
    Registriert seit
    31.12.2015
    Beiträge
    40
    Thanks (gegeben)
    31
    Thanks (bekommen)
    9
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    If ifconfig shows an inet6 address, you can also try another configuration:
    • undo the change in /etc/rc.local
    • add the following lines at the end of /etc/sysctl.conf:


    Code:
    net.ipv6.conf.all.disable_ipv6=1
    net.ipv6.conf.default.disable_ipv6=1
    net.ipv6.conf.lo.disable_ipv6=1
    • run sysctl -p and restart box
    • apply ifconfig as above

  9. #9
    Mitglied
    Registriert seit
    09.07.2020
    Beiträge
    32
    Thanks (gegeben)
    0
    Thanks (bekommen)
    2
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Yep, Its better solution THX !!!


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 16:08 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,88%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com