Satellite.xml?

**s3n0** · 15.04.2018, 19:36

You say you've tried everything, but I do not know what "everything" means.

Did you even try the clean flash of the latest firmware (OpenATV) and then set everything from over again ? Of course, tuner tuning is the most important thing, and then tuning all the available transponder channels from your satellites (creating a new "lamedb" file).

Do not use backups and configurations (satellites.xml) from other set top boxes when testing functionality. The current firmware contains all the necessary information, including current satellites.

**Alfred42** · 16.04.2018, 18:32

Yes, have tried both OpenAV 6.1 and 6.2 but not working. Also tried a few OE 2.5 but nothing works No signal level from 27,5W.

But it works fine on my DM900/OpenATV6,1 and Vu+Duo2/OpenPLi6.1 so that will do for the moment.

**Alfred42** · 07.05.2018, 18:17

Problem solved!

As I have a twin S2-tuner from my DM900 (changed to trippeltuner) I tried with this tuner in my DM7080. And YES! I get signal from 27,5W!

I wonder why the buildtin tuners do not work. Can I change the buildtin twintuners? Is it possible to change the order of tuners? so I can make tuner A1 to be B1 for example?

**Papi2000** · 07.05.2018, 19:16

No. The naming comes from the recognition sequence vs tuner type. You cannot change that.
I have the older FBC SAT Tuner for the DM900 in it running smoothly with oATV6.2.
These Problems only seem to occure with the newer types after that model, because for them there is no longer old mode in the driver. Only new mode for tuner management. And that seems not fully implemented in OE-A Images - only DreamOS-based images.

**Alfred42** · 07.05.2018, 19:41

OK, tanks for your answer. So I have to remove the original twintuner. Because I have also a twin dual C/T2 tuner in the box. And only 5 tuners can be configured. Do you think it is difficult to unmount the original twin?

**Papi2000** · 07.05.2018, 21:33

The DM900UHD only has one tuner slot for a plugin tuner - no fixmounted tuners onboard. The original old TWIN DVB-S2 Tuner delivered with the first DM900UHD also is running smoothly.

**Alfred42** · 07.05.2018, 21:43

Yes, but how about to remove theoriginal twin S2-tuner from my DM7080? It should solve the problem with only 5 tunerpossibility in the img. Then I colud have the "old" S2-tuner from my DM900 and also the twin C/T2 tuner. Alltogether 4 tuners in DM7080.

**Papi2000** · 07.05.2018, 22:27

The are soldered to the mainboard, and cannot be removed.

**Alfred42** · 08.05.2018, 07:10

Hmmm, ok thanks for info. Seems that I had better try Merlin etc.

**Alfred42** · 08.05.2018, 18:51

I opened my DM7080 and took away the upper part, of the twin tuners (A1/A2) towards the front side, and restarted the box. And then Tuner A was unconnected and I had B1/B2 and C1/C2.

Thema: Satellite.xml?

Themen-Optionen

Anzeige

Stichworte

Lesezeichen

Lesezeichen

Berechtigungen