Hello. I recently install openatv image on my tm-nano receiver. I' ve tried to get my dvb-t usb to work with no luck. I' ve installed the drivers and the modules looks to load
but I can't see Tuner B. Any ideas?

~# lsmod
Module                  Size  Used by
dvb_usb_af9015         19877  0
tda18271               37422  1 dvb_usb_af9015
af9013                 17864  1 dvb_usb_af9015
mxl5007t                7525  1 dvb_usb_af9015
dvb_pll                 8292  1 dvb_usb_af9015
mc44s803                2653  1 dvb_usb_af9015
mt2060                  4006  1 dvb_usb_af9015
tda18218                3771  1 dvb_usb_af9015
mxl5005s               31582  1 dvb_usb_af9015
qt1010                  5018  1 dvb_usb_af9015
ipv6                  350516  12
core                 5912369  26

~# dmesg
usb 1-2: new high-speed USB device number 3 using ehci-brcm
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
af9013: firmware version
DVB: registering adapter 5 frontend 0 (Afatech AF9013)...
tda18218: NXP TDA18218HN successfully identified.
Registered IR keymap rc-empty
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/rc/rc1/input2
rc1: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/rc/rc1
dvb-usb: schedule remote query interval to 500 msecs.
dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.