Thanks: 0
Ergebnis 1 bis 6 von 6
Thema: USB Tuner Problem
-
25.01.2015, 00:46 #1
- Registriert seit
- 02.10.2013
- Beiträge
- 4
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
USB Tuner Problem
Hello,
I installed and usb tuner compatible with enigma (Chipset Dib700) in my Duo2, the tuner is recognized by OpenATV (last nightly version) and I can search for all channels. The problem is after the search when I try open the channels I verified that all channels are "grey" in the bouquet list (the correct will be white). If i choose one of them I can´t get image or sound. I tried in other images like BH and VTI and everything is OK, i have image and sound. I think that the driver for the usb dongle is the same for all images.
Tuner Recognized by OpenATV (don't worry the tuner as recognized as DVB-T, i changed the configuration in terrestrial.xml and this work normally in other images like I mentioned above):
Tunner Enabled:
Search Channel with Success (in this picture is hard to see but the channels are written in grey and not white):
Here is easy to see the difference, the channel in grey (Record HD) belong to the terrestrial tuner:
Ps. Just to emphasize that this configuration works in other images as BH and VTI (all of them in lastest version), but I´m a fan of OpenATV.
Thks
james-151
-
Advertising
-
25.01.2015, 01:25 #2
- Registriert seit
- 06.07.2013
- Beiträge
- 90
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 11
- Total Downloaded
- 44,13 MB
- Total Downloaded
- 44,13 MB
Box 1:Vu+Duo2Box 2:Mutant 2400Box 3:Clarke Tech ET9000Box 4:DrHD F15I have (had? It might have been mended in the meantime) a similar problem with a USB-Sat-Tuner (Technotrend 3600). It worked alright with the VTi-Image but not with OpenATV.
-
27.01.2015, 02:34 #3
- Registriert seit
- 02.10.2013
- Beiträge
- 4
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterIt´s weird why this works in BH and VTI and do not work OpenATV.
-
08.04.2015, 21:05 #4
- Registriert seit
- 02.10.2013
- Beiträge
- 4
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterI updated the image for the OpenATV 5.0 and the problem persist, anyone know what the differences between one image with OE1.6 to the OE2.0/OE3.0 that maybe affect the usb tuner? It´s so weird work with OE1.6 and not work with the new versions.
-
06.09.2015, 01:38 #5
- Registriert seit
- 01.09.2015
- Beiträge
- 1
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 11,25 MB
- Total Downloaded
- 11,25 MB
Same problem here in my Azbox Premium (OpenATV 5.1).
stk807x terrestrial usb tuner scan all channels but I can't watch then... all channels are grey in the list.
This bug is annoying...
# lsusb
Bus 001 Device 002: ID 1554:5010
-----------------------------------------------------------------------------------------------
# dmesg
[ 28.760000] dvb-usb: found a 'Prolink Pixelview SBTVD' in warm state.
[ 28.770000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 28.780000] DVB: registering new adapter (Prolink Pixelview SBTVD)
[ 29.350000] DVB: registering adapter 1 frontend 0 (DiBcom 8000 ISDB-T)...
[ 29.680000] DiB0070: successfully identified
[ 29.700000] dvb-usb: Prolink Pixelview SBTVD successfully initialized and connected.
[ 29.700000] dib0700: rc submit urb failed
[ 29.700000]
[ 29.720000] usbcore: registered new interface driver dvb_usb_dib0700
-----------------------------------------------------------------------------------------------
# cat /proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1554 ProdID=5010 Rev= 1.00
S: Manufacturer=DiBcom
S: Product=STK807X
S: SerialNumber=016
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=dvb_usb_dib0700
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=64ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-----------------------------------------------------------------------------------------------
# cat /proc/bus/nim_sockets
NIM Socket 1:
Type: DVB-T
Name: STK807X
Has_Outputs: no
Frontend_Device: 1
-----------------------------------------------------------------------------------------------
# lsmod
dvb_usb_dib0700 88561 1
xc4000 24700 1 dvb_usb_dib0700
lgdt3305 16711 1 dvb_usb_dib0700
s5h1411 10026 1 dvb_usb_dib0700
xc5000 15099 1 dvb_usb_dib0700
mxl5007t 9117 1 dvb_usb_dib0700
tuner_xc2028 23698 1 dvb_usb_dib0700
mt2266 4681 1 dvb_usb_dib0700
dib9000 31848 1 dvb_usb_dib0700
dib8000 46452 1 dvb_usb_dib0700
dib0070 9405 1 dvb_usb_dib0700
dib7000m 16261 1 dvb_usb_dib0700
dib7000p 30824 1 dvb_usb_dib0700
dib0090 28881 1 dvb_usb_dib0700
dib3000mc 12434 1 dvb_usb_dib0700
dibx000_common 8329 6 dib3000mc,dib7000p,dib7000m,dib8000,dib9000,dvb_us b_dib0700
mt2060 4625 1 dvb_usb_dib0700Geändert von nullpointer (06.09.2015 um 21:07 Uhr)
-
15.10.2015, 03:59 #6
- Registriert seit
- 14.10.2015
- Beiträge
- 2
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 1,24 MB
- Total Downloaded
- 1,24 MB
Hello all, hopefully someone here will be able to advise me.
I added a dib0700 tuner ( Sony Play TV) to an Optimuss OS1+, presuming it would work as on my Duo running BH. However, only 1 tuner shows up. This is a dual tuner, why only Tuner C? Is this a limitation of OpenATV? Or can it be switched somehow?
Lesezeichen