Test DVB-USB Sticks mit Edision (nach Chipsatz)

**Captain** · 13.07.2014, 08:05

seit Image 12.7.2014 gehen nun auch USB-DVB Stick hier schon mal eine Übersicht welcher Chipsatz getestet wurde.

Die Entsprechenden Treiber liegen auf den Feed und müssen passend Nach Installiert werden.

dvb_usb_dib0700:
usb 3-1: new high-speed USB device number 2 using ehci-brcm
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
usb 3-1: DVB: registering adapter 9 frontend 0 (DiBcom 7000PC)...
DiB0070: successfully identified
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

Test DVB-USB Sticks mit Edision (nach Chipsatz)-dip0700.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-dip0700-scan.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-dip0700-tv.jpg

**Captain** · 13.07.2014, 08:32

Chip: af9035

usb 3-1: new high-speed USB device number 6 using ehci-brcm
input: Afa Technologies Inc. AF9035A USB Device as /devices/platform/ehci-brcm.2/usb3/3-1/3-1:1.1/input/input1
hid-generic 0003:15A4:1001.0001: input,hidraw0: USB HID v1.01 Keyboard [Afa Technologies Inc. AF9035A USB Device] on usb-ehci_hcd-1/input1
usb 3-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in cold state
usbcore: registered new interface driver dvb_usb_af9035
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
usb 3-1: dvb_usb_af9035: firmware version=12.5.13.0
usb 3-1: dvb_usb_v2: found a 'Afatech AF9035 reference design' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Afatech AF9035 reference design)
i2c i2c-0: af9033: firmware version: LINK=12.5.13.0 OFDM=6.8.13.0
usb 3-1: DVB: registering adapter 9 frontend 0 (Afatech AF9033 (DVB-T))...
i2c i2c-0: tua9001: Infineon TUA 9001 successfully attached
usb 3-1: dvb_usb_v2: 'Afatech AF9035 reference design' successfully initialized and connected

wenn Problem gibt

vom feed noch mal folgende Treiber nachladen

opkg install kernel-module-af9033 kernel-module-tua9001

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9035.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9035-scan.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9035-tv.jpg

Weitere Sticks mit 9035

usb 3-1: new high-speed USB device number 2 using ehci-brcm
usb 3-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in cold state
usbcore: registered new interface driver dvb_usb_af9035
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9035-02.fw'
usb 3-1: dvb_usb_af9035: firmware version=12.5.13.0
usb 3-1: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (AVerMedia HD Volar (A867))
i2c i2c-0: af9033: firmware version: LINK=12.5.13.0 OFDM=6.8.13.0
usb 3-1: DVB: registering adapter 9 frontend 0 (Afatech AF9033 (DVB-T))...
mxl5007t 0-0060: creating new instance
Registered IR keymap rc-empty
input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0/input1
rc0: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0
usb 3-1: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 3-1: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected

Test DVB-USB Sticks mit Edision (nach Chipsatz)-volar.jpg

**Captain** · 13.07.2014, 09:05

CHIPSATZ: af9015:

usb 3-1: new high-speed USB device number 2 using ehci-brcm
Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
input: Afatech DVB-T 2 as /devices/platform/ehci-brcm.2/usb3/3-1/3-1:1.1/input/input1
hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-ehci_hcd-1/input1
usb 3-1: dvb_usb_v2: found a 'Afatech AF9015 reference design' in cold state
usbcore: registered new interface driver dvb_usb_af9015
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
usb 3-1: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Afatech AF9015 reference design)
i2c i2c-0: af9013: firmware version 4.95.0.0
usb 3-1: DVB: registering adapter 9 frontend 0 (Afatech AF9013)...
i2c i2c-0: tda18218: NXP TDA18218HN successfully identified
Registered IR keymap rc-empty
input: Afatech AF9015 reference design as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0/input2
rc0: Afatech AF9015 reference design as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0
usb 3-1: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 3-1: dvb_usb_v2: 'Afatech AF9015 reference design' successfully initialized and connected

beim Problem Nachladen von folgenden Kernel Treibern je nach Stick Model

opkg install kernel-module-af9013 kernel-module-dvb-pll kernel-module-dvb-usb kernel-module-mc44s803 kernel-module-mt2060 kernel-module-mxl5005s kernel-module-mxl5007t kernel-module-qt1010 kernel-module-tda18218 ernel-module-tda18271

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9015.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9015-scan.jpg

Test DVB-USB Sticks mit Edision (nach Chipsatz)-af9015-tv.jpg

Weitere Stick mit 9015

usb 3-1: dvb_usb_v2: found a 'TerraTec Cinergy T Stick RC' in cold state
usbcore: registered new interface driver dvb_usb_af9015
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
usb 3-1: dvb_usb_v2: found a 'TerraTec Cinergy T Stick RC' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (TerraTec Cinergy T Stick RC)
i2c i2c-0: af9013: firmware version 4.95.0.0
usb 3-1: DVB: registering adapter 9 frontend 0 (Afatech AF9013)...
i2c i2c-0: tda18218: NXP TDA18218HN successfully identified
Registered IR keymap rc-terratec-slim-2
input: TerraTec Cinergy T Stick RC as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0/input2
rc0: TerraTec Cinergy T Stick RC as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0
usb 3-1: dvb_usb_v2: schedule remote query interval to 500 msecs
usb 3-1: dvb_usb_v2: 'TerraTec Cinergy T Stick RC' successfully initialized and connected

Test DVB-USB Sticks mit Edision (nach Chipsatz)-terratec-cinergy.jpg

**Captain** · 13.07.2014, 09:53

Chipsart:it9135

usbcore: registered new interface driver dvb_usb_it913x
it913x: Chip Version=01 Chip Type=9135
it913x: Dual mode=0 Tuner Type=38<6>usb 3-1: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-01.fw'
it913x: FRM Starting Firmware Download
it913x: FRM Firmware Download Completed - Resetting Deviceit913x: Chip Version=01 Chip Type=9135
it913x: Firmware Version 204869120<6>usb 3-1: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (ITE 9135 Generic)
it913x-fe: ADF table value :00
it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
it913x-fe: Tuner LNA type :38
usb 3-1: DVB: registering adapter 9 frontend 0 (ITE 9135 Generic_1)...
Registered IR keymap rc-it913x-v1
input: ITE 9135 Generic as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0/input1
rc0: ITE 9135 Generic as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0
usb 3-1: dvb_usb_v2: schedule remote query interval to 250 msecs
usb 3-1: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected

Test DVB-USB Sticks mit Edision (nach Chipsatz)-it935.jpg

Update: Scan gefixt mit Image 14.07.2014

Test DVB-USB Sticks mit Edision (nach Chipsatz)-scan.jpg

**Captain** · 13.07.2014, 10:11

Chipsatz : RTL2832

usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (TerraTec Cinergy T Stick RC (Rev. 3))
usb 3-1: DVB: registering adapter 9 frontend 0 (Realtek RTL2832 (DVB-T))...
i2c i2c-0: e4000: Elonics E4000 successfully identified
Registered IR keymap rc-empty
input: TerraTec Cinergy T Stick RC (Rev. 3) as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0/input1
rc0: TerraTec Cinergy T Stick RC (Rev. 3) as /devices/platform/ehci-brcm.2/usb3/3-1/rc/rc0
usb 3-1: dvb_usb_v2: schedule remote query interval to 400 msecs
usb 3-1: dvb_usb_v2: 'TerraTec Cinergy T Stick RC (Rev. 3)' successfully initialized and connected

Problem: scan sehr schlecht, bei fertiger DVB-T Channel liste nur Artefacte, issue wurde an Hersteller gemeldet

Test DVB-USB Sticks mit Edision (nach Chipsatz)-rtl2832.jpg

**Captain** · 14.07.2014, 18:06

Update Post 4: http://www.opena.tv/edision/8077-tes...html#post65115

Scan gefixt mit IT9135

**Captain** · 14.07.2014, 18:09

Update mit Image 14.07.2014

das Manuell Nachladen der Treiber ist nun auch gefixt für die Modelle die Ich schon getestet hab.
Aufruf an die User bitte mal eurer USB DVB Stick Testen und die Information hier abgeben was alles geht mit der Edision danke

**caroli** · 20.07.2014, 08:21

HI!

Getestet DVB-T USB Stick Gigabyte U-8000 an Optimuss OS2+ wird erkannt - Suchlauf leider 0 Sender.
DVB-T USB Stick Gigabyte U-7200 wird nicht erkannt nach Installation aller Treiber vom Feed.

**Captain** · 20.07.2014, 08:28

was hat der Stick für ein Chip ?

starte die Box und stecke dann den stick in die box

und dann mache unter telnet

dmesg und poste die Ausgabe must nur den letzten part nehmen mit der gesamten usb und Treiber Erkennung

mal schauen was der Hersteller da machen kann

**caroli** · 20.07.2014, 08:42

Sollte eigentlich der dib0700 Chipsatz sein. Hier dmesg:

Code:

OPTIMUSS OS2+ Linux DVB BCM73xx CI Driver Release Time (11/07/14)
BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
BKNI_Malloc(linuxkernel) top users:
    blocks,   bytes, filename:line
       805,  171500, ../BSEAV/lib/utils/balloc.c:35
       497,   33796, ../magnum/basemodules/mem/bmem_system.c:309
       340,   21760, magnum/commonutils/mrc/src/bmrc_monitor.c:979
DVB: registering new adapter (bcmdvb-0)
 check_sp9680pvb : failed to communicate with sp9680pvb
(NULL device *): DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2)...
tunercnt 0  name bcmdvb-0 adapter0
DVB: registering new adapter (bcmdvb-1)
(NULL device *): DVB: registering adapter 1 frontend 1 (BCM7356 DVB-S2)...
tunercnt 1  name bcmdvb-1 adapter1
DVB: registering new adapter (bcmdvb-2)
DVB: registering new adapter (bcmdvb-3)
DVB: registering new adapter (bcmdvb-4)
>>>vtuner0: register
DVB: registering new adapter (bcmdvb-5)
>>>vtuner1: register
DVB: registering new adapter (bcmdvb-6)
>>>vtuner2: register
DVB: registering new adapter (bcmdvb-7)
>>>vtuner3: register
DVB: registering new adapter (bcmdvb-8)
Registering device 'sci', major '238'
Version of smartcard driver: [1.0.0]
Process Input : 37 44 C5 98 EC 9F 4B B1 F9 65 51 67
        Process Output : 0D B5 D0 9F 18 A5 C8 09 81 C7 E7 3E
        @@@ step 3
@@@ : [02]
Data Input : 5D D8 94 92 61 A1 F6 83 E0 F7 3E B3
Data Output : C2 0B 79 38 34 C3 96 31 9F 01 10 A7
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: Staging version
r8712u: register rtl8712_netdev_ops to netdev_ops
usb 1-1.1: r8712u: USB_SPEED_HIGH with 4 endpoints
usb 1-1.1: r8712u: Boot from EFUSE: Autoload OK
usb 1-1.1: r8712u: CustomerID = 0x0000
usb 1-1.1: r8712u: MAC Address from efuse = 1c:4b:d6:de:e7:fc
usb 1-1.1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
__clk_enable: network [1]
__clk_enable: enet [1]
bcm40nm_pm_genet_enable 00
eth0: Link up, 100 Mbps Full Duplex
NET: Registered protocol family 10
svc: failed to register lockdv1 RPC service (errno 124).
usb 1-1.2: new high-speed USB device number 5 using ehci-brcm
dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Gigabyte U8000-RH)
usb 1-1.2: DVB: registering adapter 9 frontend 0 (DiBcom 7000PC)...
DVB: Unable to find symbol xc2028_attach()
dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_dib0700

Thema: Test DVB-USB Sticks mit Edision (nach Chipsatz)

Themen-Optionen

Anzeige

Test DVB-USB Sticks mit Edision (nach Chipsatz)

Stichworte

Lesezeichen

Lesezeichen

Berechtigungen