Ergebnis 11 bis 20 von 36
-
20.07.2014, 19:29 #11
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21090
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterah sehe das Problem
Unable to find symbol xc2028_attach()
muss das Treiber Package anpassen da fehlt für dein Stick was
openATV we are open Source
Boykott GPL violator
-
Advertising
-
20.07.2014, 19:36 #12
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21090
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterzum test bis das morgen im image ist
opkg install kernel-module-tuner-xc2028
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thankscaroli bedankten sich
-
20.07.2014, 20:42 #13
- Registriert seit
- 28.06.2014
- Beiträge
- 24
- Thanks (gegeben)
- 9
- Thanks (bekommen)
- 5
- Total Downloaded
- 150,9 KB
- Total Downloaded
- 150,9 KB
Box 1:Edision Optimuss OS2 plusBox 2:GI Xpeed LX2 SAT/SATBox 3:GI Xpeed LX2 SAT/DVB-TBox 4:DM 800HDseBox 5:DM 7000S - Nokia Dbox2Vielen Dank Captain!
Findet nun Sender!
Wirklich bemerkenswerte Arbeit.
Meinen vollen Respekt dafuer!!!
Wo ist das Problem beim Gigabyte U-7200 Stick mi AF9035 Chip, welcher auch nicht erkannt wird?
-
20.07.2014, 20:46 #14
-
Danke - 1 Thankscaroli bedankten sich
-
20.07.2014, 21:04 #15
- Registriert seit
- 28.06.2014
- Beiträge
- 24
- Thanks (gegeben)
- 9
- Thanks (bekommen)
- 5
- Total Downloaded
- 150,9 KB
- Total Downloaded
- 150,9 KB
Box 1:Edision Optimuss OS2 plusBox 2:GI Xpeed LX2 SAT/SATBox 3:GI Xpeed LX2 SAT/DVB-TBox 4:DM 800HDseBox 5:DM 7000S - Nokia Dbox2Leuchtet keine LED im Stick wie beim U8000 - wird wohl nicht erkannt.
Code:optimussos2plus login: root root@optimussos2plus:~# dmesg usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver dm9601 usbcore: registered new interface driver gl620a usbcore: registered new interface driver net1080 usbcore: registered new interface driver plusb usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver __clk_enable: usb [1] bcm40nm_pm_usb_enable 00 ehci-brcm ehci-brcm.0: Broadcom STB EHCI ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1 ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300 ehci-brcm ehci-brcm.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ehci-brcm ehci-brcm.1: Broadcom STB EHCI ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2 ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500 ehci-brcm ehci-brcm.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected ehci-brcm ehci-brcm.2: Broadcom STB EHCI ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3 ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300 ehci-brcm ehci-brcm.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected ehci-brcm ehci-brcm.3: Broadcom STB EHCI ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4 ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500 ehci-brcm ehci-brcm.3: USB 2.0 started, EHCI 1.00 hub 4-0:1.0: USB hub found hub 4-0:1.0: 1 port detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-brcm ohci-brcm.0: Broadcom STB OHCI ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5 ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 1 port detected ohci-brcm ohci-brcm.1: Broadcom STB OHCI ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6 ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600 hub 6-0:1.0: USB hub found hub 6-0:1.0: 1 port detected ohci-brcm ohci-brcm.2: Broadcom STB OHCI ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7 ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400 usb 1-1: new high-speed USB device number 2 using ehci-brcm hub 7-0:1.0: USB hub found hub 7-0:1.0: 1 port detected ohci-brcm ohci-brcm.3: Broadcom STB OHCI ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8 ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected hub 8-0:1.0: USB hub found hub 8-0:1.0: 1 port detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mousedev: PS/2 mouse device common for all mice i2c /dev entries driver usbcore: registered new interface driver btusb hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP: cubic registered NET: Registered protocol family 17 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Key type dns_resolver registered EBI CS1: setting up NAND flash (primary) ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD/Spansion S34ML02G1), 256MiB, page size: 2048, OOB size: 64 ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x01, Chip ID: 0xda (AMD/Spansion S34ML02G1), 256MiB, page size: 2048, OOB size: 64 brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 Creating 3 MTD partitions on "brcmnand.0": 0x000000000000-0x00000f500000 : "rootfs" 0x000000000000-0x00000f500000 : "rootfs(redundant)" 0x00000f500000-0x00000ff00000 : "kernel" EBI CS0: setting up NOR flash physmap platform flash device: 04000000 at 1c000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000 physmap-flash.0: Found an alias at 0x800000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x1800000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x2000000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x2800000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x3000000 for the chip at 0x0 physmap-flash.0: Found an alias at 0x3800000 for the chip at 0x0 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query version 1.3. number of CFI chips: 1 PM: CP0 COUNT/COMPARE frequency does not depend on divisor UBI: attaching mtd0 to ubi0 usb 1-1.1: new high-speed USB device number 3 using ehci-brcm usb 1-1.2: new full-speed USB device number 4 using ehci-brcm usb 1-1.2: new high-speed USB device number 5 using ehci-brcm input: GIGABYTE Technologies Inc. U7200 USB TV Device as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input0 hid-generic 0003:1044:7005.0001: input,hidraw0: USB HID v1.01 Keyboard [GIGABYTE Technologies Inc. U7200 USB TV Device] on usb-ehci_hcd-1.2/input1 usb 1-1.4: new high-speed USB device number 6 using ehci-brcm scsi3 : usb-storage 1-1.4:1.0 UBI: scanning is finished UBI: attached mtd0 (name "rootfs", size 245 MiB) to ubi0 UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 UBI: good PEBs: 1960, bad PEBs: 0, corrupted PEBs: 0 UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 UBI: max/mean erase counter: 11/3, WL threshold: 4096, image sequence number: 655951328 UBI: available PEBs: 0, total reserved PEBs: 1960, PEBs reserved for bad PEB handling: 40 ALSA device list: No soundcards found. UBI: background thread "ubi_bgt0d" started, PID 58 UBIFS: parse sync UBIFS: background thread "ubifs_bgt0_0" started, PID 59 UBIFS: mounted UBI device 0, volume 0, name "rootfs"(null) UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS: FS size: 241889280 bytes (230 MiB, 1905 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS: media format: w4/r0 (latest is w4/r0), UUID D35BE5FA-E7F4-4BCD-87C6-03254AECD1F7, small LPT model scsi 3:0:0:0: Direct-Access Hitachi HTS545050B9A300 PQ: 0 ANSI: 2 CCS VFS: Mounted root (ubifs filesystem) on device 0:12. devtmpfs: mounted Freeing unused kernel memory: 228k freed sd 3:0:0:0: Attached scsi generic sg0 type 0 sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 28 00 00 00 sd 3:0:0:0: [sda] No Caching mode page present sd 3:0:0:0: [sda] Assuming drive cache: write through sd 3:0:0:0: [sda] No Caching mode page present sd 3:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 3:0:0:0: [sda] No Caching mode page present sd 3:0:0:0: [sda] Assuming drive cache: write through sd 3:0:0:0: [sda] Attached SCSI disk EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) core: module_layout: kernel tainted. Disabling lock debugging due to kernel taint [ FORCE1-PLUS ] [Front Version = 123 ] input: OPTIMUSS OS2+ remote control (native) as /devices/virtual/input/input1 OPTIMUSS OS2+ Linux DVB BCM73xx CI Driver Release Time (11/07/14) BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704 BKNI_Malloc(linuxkernel) top users: blocks, bytes, filename:line 805, 171500, ../BSEAV/lib/utils/balloc.c:35 497, 33796, ../magnum/basemodules/mem/bmem_system.c:309 340, 21760, magnum/commonutils/mrc/src/bmrc_monitor.c:979 DVB: registering new adapter (bcmdvb-0) check_sp9680pvb : failed to communicate with sp9680pvb (NULL device *): DVB: registering adapter 0 frontend 0 (BCM7356 DVB-S2)... tunercnt 0 name bcmdvb-0 adapter0 DVB: registering new adapter (bcmdvb-1) (NULL device *): DVB: registering adapter 1 frontend 1 (BCM7356 DVB-S2)... tunercnt 1 name bcmdvb-1 adapter1 DVB: registering new adapter (bcmdvb-2) DVB: registering new adapter (bcmdvb-3) DVB: registering new adapter (bcmdvb-4) >>>vtuner0: register DVB: registering new adapter (bcmdvb-5) >>>vtuner1: register DVB: registering new adapter (bcmdvb-6) >>>vtuner2: register DVB: registering new adapter (bcmdvb-7) >>>vtuner3: register DVB: registering new adapter (bcmdvb-8) Registering device 'sci', major '238' Version of smartcard driver: [1.0.0] Process Input : 2A 70 FA F7 47 7D 0C AD 76 2D CA 24 Process Output : A3 1E 79 BA E6 E6 12 51 9C 45 61 87 @@@ step 3 @@@ : [02] Data Input : B3 A2 91 6B 05 6B 49 1A F8 82 DA 78 Data Output : A4 0A 3A 28 86 5F 7D AF BE 04 A5 AB r8712u: module is from the staging directory, the quality is unknown, you have been warned. r8712u: Staging version r8712u: register rtl8712_netdev_ops to netdev_ops usb 1-1.1: r8712u: USB_SPEED_HIGH with 4 endpoints usb 1-1.1: r8712u: Boot from EFUSE: Autoload OK usb 1-1.1: r8712u: CustomerID = 0x0000 usb 1-1.1: r8712u: MAC Address from efuse = 1c:4b:d6:de:e7:fc usb 1-1.1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" usbcore: registered new interface driver r8712u __clk_enable: network [1] __clk_enable: enet [1] bcm40nm_pm_genet_enable 00 eth0: Link up, 100 Mbps Full Duplex NET: Registered protocol family 10 svc: failed to register lockdv1 RPC service (errno 124). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period (net 8074ef80) Undifined lcd ioctl 1015 NEXUS_DolbyVolume258_SetSettings -9000 ====== NEXUS_DolbyVolume258_SetSettings 0 ====== NEXUS_DolbyVolume258_SetSettings 0 ====== NEXUS_DolbyVolume258_SetSettings 0 ====== NEXUS_DolbyVolume258_SetSettings -520 ====== path status 0 NEXUS_DolbyVolume258_SetSettings -9000 ====== - HD_VideoClip out - NEXUS_DolbyVolume258_SetSettings -520 ====== root@optimussos2plus:~#
http://www.gigabyte.de/products/prod...px?pid=2875#ov
-
20.07.2014, 21:21 #16
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21090
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterdas sagt denke ich alles: Gigabyte GT-U7200 - LinuxTVWiki
openATV we are open Source
Boykott GPL violator
-
20.07.2014, 21:26 #17
- Registriert seit
- 28.06.2014
- Beiträge
- 24
- Thanks (gegeben)
- 9
- Thanks (bekommen)
- 5
- Total Downloaded
- 150,9 KB
- Total Downloaded
- 150,9 KB
Box 1:Edision Optimuss OS2 plusBox 2:GI Xpeed LX2 SAT/SATBox 3:GI Xpeed LX2 SAT/DVB-TBox 4:DM 800HDseBox 5:DM 7000S - Nokia Dbox2Yep, sieht so aus.
Naja wenigsten der U8000 laeuft.
Bekomme naechste Woche noch einen mit RTL2832U Chip - werde dann hier berichten.
Danke ncohmal!
-
22.07.2014, 18:18 #18
- Registriert seit
- 28.06.2014
- Beiträge
- 24
- Thanks (gegeben)
- 9
- Thanks (bekommen)
- 5
- Total Downloaded
- 150,9 KB
- Total Downloaded
- 150,9 KB
Box 1:Edision Optimuss OS2 plusBox 2:GI Xpeed LX2 SAT/SATBox 3:GI Xpeed LX2 SAT/DVB-TBox 4:DM 800HDseBox 5:DM 7000S - Nokia Dbox2U8000 Stick läuft soweit. Im Metrix-Skin wird allerdings kein Tuner C angezeigt und auch die Signalanzeige ist bei 0%.
Ist es möglich das noch zu fixen?
-
22.07.2014, 18:23 #19
- Registriert seit
- 07.04.2013
- Ort
- OpenATV - Wien
- Beiträge
- 153
- Thanks (gegeben)
- 3636
- Thanks (bekommen)
- 3542
- Total Downloaded
- 51,16 MB
- Total Downloaded
- 51,16 MB
Wegen Tuneranzeige mal grün->mymetrixlite->grün->Ok
-
Danke - 1 Thankscaroli bedankten sich
-
22.07.2014, 18:26 #20
- Registriert seit
- 28.06.2014
- Beiträge
- 24
- Thanks (gegeben)
- 9
- Thanks (bekommen)
- 5
- Total Downloaded
- 150,9 KB
- Total Downloaded
- 150,9 KB
Box 1:Edision Optimuss OS2 plusBox 2:GI Xpeed LX2 SAT/SATBox 3:GI Xpeed LX2 SAT/DVB-TBox 4:DM 800HDseBox 5:DM 7000S - Nokia Dbox2Danke Thomas4711!
Lesezeichen