Ergebnis 1 bis 4 von 4
-
07.12.2020, 11:42 #1
- Registriert seit
- 14.11.2020
- Beiträge
- 2
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 2
- Total Downloaded
- 0
- Total Downloaded
- 0
[SOLVED] MIO+ 4K won't start or flash anymore. Stuck with 'EDISION' logo
Hi Everyone,
I recently bought my first Enigma2 based receiver OS MIO 4K +.
It arrived with OpenATV 6.2 image (see attachment)
But i've decided to upgrade to 6.4 because previous version wouldn't work with blindscan.
Before the upgrade via USB stick, i took a full backup.
After the 6.4 upgrade, blindscan was working but I got stuck quite often while i was using a pc connection and openwebif
So I decide to start from scratch again.
I've copied my full backup image to a USB stick again.
The box started booting but slower than normal. Then the 'EDISION' was on the display but there it got stuck.
I've waited for several hrs, just to be sure that no flashing was ongoing in the background but that didn't help. no response from remote control, no image on TV set, on LAN-port only yellow LED was on.
Then, only thing i could do was to switch off the unit (hard reset), remove the USB and restart the unit. Unfortunately the box was not rebooting correctly. Still the 'EDISION' was on the display but there it got stuck.
What can i do to restore the receiver?
Which image can i use to start from scratch (i don't care about old settings/favorites lost).
Is it best to use openatv-6.4-osmio4kplus-202012XX_usb.zip or openatv-6.4-osmio4kplus-202012XX_recovery_emmc.zip if I want to start from scratch?
Best Regards,
Onder DelindeGeändert von laptan (08.12.2020 um 09:28 Uhr)
-
Advertising
-
07.12.2020, 16:09 #2
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +You should try to reflash the box again, use a small sized USB stick, 2 GB is quiet enough, see the Flash How To which describes which image version you should use and how you should proceed: Flashanleitung mit USB Stick OS mio+ 4K / How to flash OS mio+ 4K via USB stick
You can also use the openATV Version 6.4 recovery_emmc.zip, openATV Nightly Downloads please keep in mind that the openatv-6.4-osmio4kplus-xxxxxxxx_recovery_emmc.zip deletes all images including the multiboot images!
Does this fix your problem?Geändert von laptan (07.12.2020 um 16:19 Uhr)
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
Danke - 1 Thanksel bandido bedankten sich
-
08.12.2020, 07:09 #3
- Registriert seit
- 14.11.2020
- Beiträge
- 2
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 2
- Total Downloaded
- 0
- Total Downloaded
- 0
ThemenstarterHi Laptan,
You make my day!!
Brilliant explanation.
Thank you so much.
My mistakes:
I've used a USB stick greater than 2 GB to restore.
And I had to press OK on the remote control before it started flashing (couldn't see anything on my TV)
Best Regards,
Mit herzlichen Grüßen,
Onder Delinde
-
Danke - 2 Thanks
-
08.12.2020, 09:23 #4
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +You are welcome and I'm glad you made it!
Have fun with your box enjoy the openATV image.
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
Lesezeichen