Ergebnis 1 bis 4 von 4
-
15.04.2023, 12:50 #1
- Registriert seit
- 12.12.2017
- Beiträge
- 8
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 0
- Total Downloaded
- 897,8 KB
- Total Downloaded
- 897,8 KB
-
Advertising
-
15.04.2023, 13:04 #2
- Registriert seit
- 13.10.2021
- Ort
- Deutschland
- Beiträge
- 794
- Thanks (gegeben)
- 257
- Thanks (bekommen)
- 497
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:Dreambox 8000 SSC mit OATV 7.3Box 2:Dreambox 8000 SS mit NN2Box 3:DREAMBOX 800se V2 OATV 7.3 smallBox 4:viele andere 4k Boxen[gelost]nacshtes problem "second failed..." - Allgemeines zur DM7020HD / 7020HDv2 - i-have-a-dreambox.com | Dreambox - Support
"2nd failed" means that part of the bootloader (the second stage loader) was shot.
The important part is: "Second" :winking_face:Ie you still have a "first stage loader" with which you can also restore the second.
This can be done with the DreamUp software via the mini-USB service port. You must first install the USB driver (VCP UART driver from 404 Not Found ) (it is the same for all new Dreamboxes, use the one from the 800se) and box and PC with a mini-USB cable (e.g. from the digital camera).
Then you can follow these instructions and preferably flash a new image from 404 Not Found (make sure you use one without V2): http:/ /www.dream-multimedia-tv…020hd-flashen-mit-dreamup
Just... The error actually NEVER happens. Well, in 10 years Dreambox I've never had a "2nd failed" and I've already flashed many boxes.
What kind of image did you flash there? You're doing something wrong or your box really has a quirk...
-
Danke - 1 ThanksZLIFE bedankten sich
-
16.04.2023, 16:06 #3
- Registriert seit
- 12.12.2017
- Beiträge
- 8
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 0
- Total Downloaded
- 897,8 KB
- Total Downloaded
- 897,8 KB
ThemenstarterThank you "dalek one" for your fast help.
All happened when the box continue telling me that am using old image(6.3 version)
So I tried to flash it with openatv 7.2 and all things went bad,
I will give your advice a try.
I am unable to see or obtain the IP Adress of my box!
Tried ALL: DCC, Winscp. Browser, CMD, Router, Fing App. No IP adress!
Thank you again.
-
17.04.2023, 19:22 #4
- Registriert seit
- 12.12.2017
- Beiträge
- 8
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 0
- Total Downloaded
- 897,8 KB
- Total Downloaded
- 897,8 KB
ThemenstarterThank you my friend very very much for your help. I followed your instructions and everything is OK now. 2 notes:
1- Dreamup 1.3.3.11 version is the only version that worked for my DM7020HD V2.
2- Flashing was possible only with an old backup(openatv 6.0).
Thank You again!
Lesezeichen