Ergebnis 61 bis 70 von 81
-
29.12.2017, 18:38 #61
- Registriert seit
- 11.06.2016
- Beiträge
- 124
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 19
- Total Downloaded
- 1,01 MB
- Total Downloaded
- 1,01 MB
So, habe jetzt auch so ein Teil. satipclient geht leider nicht. Kommt lapidar die Meldung "no vtuner found".
Gruß
TOM
hier mal ein Debug-Output des Clients bei vorhandener /etc/vtuner.conf:
Code:[2036 ../git/option.cpp : 44][dump ] debug: [0] tuner type : satip_client, ip : 192.168.0.205, fe_type : 0 [2036 ../git/option.cpp : 31][optParser ] debug: 1 Satip configuration loaded.. [2036 ../git/manager.cpp : 32][sessionManager ] debug: Create resource manager. [2036 ../git/manager.cpp : 58][satipStart ] debug: try connect : [0] type : satip_client, ip : 192.168.0.205, fe_type : 0 [2036 ../git/session.cpp : 45][satipSession ] debug: Create SESSION.(host : 192.168.0.205, rtsp_port : 554, fe_type : 0 [2036 ../git/vtuner.cpp : 42][satipVtuner ] debug: Create SATIP VTUNER. [2036 ../git/vtuner.cpp : 93][openVtuner ] debug: Allocate vtuner failed! [2036 ../git/vtuner.cpp : 47][satipVtuner ] error: vtuner control failed [2036 ../git/rtp.cpp : 51][satipRTP ] debug: Create RTP. [2036 ../git/rtp.cpp : 129][openRTP ] info: RTP PORT : 45384, RTCP PORT : 45385 [2036 ../git/rtsp.cpp : 56][satipRTSP ] debug: Create RTSP. (host : 192.168.0.205, port : 554, rtp_port : 45384) [2036 ../git/timer.cpp : 51][create ] debug: satipTimer::create timer reset connect [2036 ../git/timer.cpp : 45][dump ] debug: TIMER DUMP : -1224194697 (inactive) [2036 ../git/timer.cpp : 57][create ] debug: satipTimer::create end. [2036 ../git/timer.cpp : 51][create ] debug: satipTimer::create timer keep alive message [2036 ../git/timer.cpp : 45][dump ] debug: TIMER DUMP : -1224194697 (inactive) [2036 ../git/timer.cpp : 45][dump ] debug: TIMER DUMP : -1224194697 (inactive) [2036 ../git/timer.cpp : 45][dump ] debug: TIMER DUMP : 1390112854 (inactive) [2036 ../git/timer.cpp : 57][create ] debug: satipTimer::create end. [2036 ../git/rtsp.cpp : 75][resetConnect ] debug: resetConnect [2036 ../git/rtsp.cpp : 840][stopTimerResetConnect ] debug: stopTimerResetConnect [2036 ../git/rtsp.cpp : 852][stopTimerKeepAliveMessage] debug: stopTimerKeepAliveMessage [2036 ../git/manager.cpp : 73][satipSessionCreate ] debug: Session init failed! [2036 ../git/session.cpp : 60][~satipSession ] debug: Destruct SESSION. [2036 ../git/rtsp.cpp : 68][~satipRTSP ] debug: Destruct RTSP. [2036 ../git/rtp.cpp : 60][~satipRTP ] debug: Destruct RTP. [2036 ../git/vtuner.cpp : 55][~satipVtuner ] debug: Destruct SATIP VTUNER. [2036 ../git/config.cpp : 49][~satipConfig ] debug: Destruct satipConfig.
Geändert von tom_63 (31.12.2017 um 16:23 Uhr)
-
Advertising
-
05.01.2018, 11:24 #62
- Registriert seit
- 11.06.2016
- Beiträge
- 124
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 19
- Total Downloaded
- 1,01 MB
- Total Downloaded
- 1,01 MB
Es gibt bei mir massive Probleme mit der Synchronität zwischen Bild und Ton. Bin gestern extra nochmal auf 6.1 zurück, habe aber auch dort festgestellt, dass der Ton sehr stark hinter dem Bild "herhinkt".
-
05.01.2018, 11:36 #63
- Registriert seit
- 06.04.2013
- Beiträge
- 1.626
- Thanks (gegeben)
- 871
- Thanks (bekommen)
- 561
- Total Downloaded
- 2,47 MB
- Total Downloaded
- 2,47 MB
Stimmt , mal abwarten , wird hoffentlich gefixt
Gesendet von meinem SM-G935F mit Tapatalk
-
05.01.2018, 16:08 #64
- Registriert seit
- 06.04.2013
- Ort
- OpenATV
- Beiträge
- 1.536
- Thanks (gegeben)
- 455
- Thanks (bekommen)
- 789
- Total Downloaded
- 655,77 MB
- Total Downloaded
- 655,77 MB
Es wird dran gearbeitet bisschen gedulden
-
05.01.2018, 20:51 #65
- Registriert seit
- 26.03.2015
- Ort
- RLP
- Beiträge
- 14
- Thanks (gegeben)
- 8
- Thanks (bekommen)
- 18
- Total Downloaded
- 220,3 KB
- Total Downloaded
- 220,3 KB
Box 1:AX HD51Box 2:Anadol Eco 4kBox 3:Dinobot 4kBox 4:LX3Box 5:3038Geh mal auf die SD Sender. Da klappt es.
Ist natürlich keine Dauerlösung
-
05.01.2018, 21:11 #66
- Registriert seit
- 04.12.2017
- Beiträge
- 71
- Thanks (gegeben)
- 15
- Thanks (bekommen)
- 7
- Total Downloaded
- 32,12 MB
- Total Downloaded
- 32,12 MB
-
20.01.2018, 10:13 #67
- Registriert seit
- 06.04.2013
- Beiträge
- 1.626
- Thanks (gegeben)
- 871
- Thanks (bekommen)
- 561
- Total Downloaded
- 2,47 MB
- Total Downloaded
- 2,47 MB
gerade den neuen Hsk wizard installiert ,läuft tadellos
-
20.01.2018, 10:20 #68
- Registriert seit
- 11.06.2016
- Beiträge
- 124
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 19
- Total Downloaded
- 1,01 MB
- Total Downloaded
- 1,01 MB
Satipclient geht mit dem Image von heute noch nicht
-
20.01.2018, 13:19 #69
- Registriert seit
- 07.04.2013
- Beiträge
- 306
- Thanks (gegeben)
- 73
- Thanks (bekommen)
- 33
- Total Downloaded
- 4,92 MB
- Total Downloaded
- 4,92 MB
Box 1:Mut@nt HD 51Box 2:Edision OS Mio+ 4KBox 3:AB PULSe 4K MiniBox 4:Zgemma H9.2H SEBis heute meine Tivusat karte wird immer noch nicht von der Cardreader gelesen...alles ausprobiert, Chip nach unten, Chip nach oben ...natürlich mit den richtigen Einstellungen trotzdem zeigt mir..(READER DEVICE ERROR ) ( Mut@nt HD51 Einstellungen für Tivusat Karte 183D übernommen )
Ist der Cardreader Treiber von der Dinobot4K noch nicht aktuell!!??Geändert von x-man (20.01.2018 um 20:21 Uhr)
-
24.01.2018, 01:50 #70
- Registriert seit
- 16.11.2017
- Beiträge
- 3
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 0
- Total Downloaded
- 0
Lesezeichen