Seite 3 von 6 ErsteErste 12345 ... LetzteLetzte
Ergebnis 21 bis 30 von 60
  1. #21
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    Zitat Zitat von MastaG Beitrag anzeigen
    Great!
    How did you solve the module problem? Did you revert back to gcc 4.6?
    Also would you mind posting the complete patch?
    send complete log i cant see the issue


    openATV we are open Source

    Boykott GPL violator

    •   Alt Advertising

       

  2. #22
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    then hex mod works we can make in bb file with a sed to replace 4.6 with 4.8


    openATV we are open Source

    Boykott GPL violator

  3. #23
    Mitglied
    Registriert seit
    17.01.2014
    Beiträge
    64
    Thanks (gegeben)
    12
    Thanks (bekommen)
    17
    Total Downloaded
    363,2 KB
    Total Downloaded
    363,2 KB
    ReceiverDanke
    I see, but is the "force" being done after the box has been started?
    In that case it's best to hex edit the modules like captain suggested or try to set CONFIG_MODVERSIONS when building the kernel.
    Imo its not good to load the drivers with force on a later state.
    Also if the drivers don't load automatically at boot time, there is no bootlogo being presented.
    Anyway keep it up!

    This will be the most updated image ever
    Geändert von MastaG (07.03.2014 um 15:42 Uhr)

  4. #24

    Registriert seit
    06.03.2014
    Beiträge
    30
    Thanks (gegeben)
    3
    Thanks (bekommen)
    41
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Code:
    root@dm800:/usr/share/enigma2# enigma2
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    16384k video mem
    setting /dev/tty0 status failed.
     - double buffering available!
    9184kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    + (9) gLCDDC
    lcd buffer 0x777da8 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox front panel" is a remotecontrol
    Input device "dreambox remote control (native)" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a remotecontrol
    Input device "dreambox ir keyboard" is a keyboard
    Input device "dreambox ir mouse" is a mouse
    Found 5 input devices.
    + (22) Hdmi CEC driver
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    cannot open /proc/stb/tsmux/input0
    cannot open /proc/stb/tsmux/input1
    done, found 0 common interface slots
    + (35) CA handler
    + (36) Stream server
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 112 channels/transponders and 1718 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    executing main
    setIoPrio best-effort level 3 ok
    main thread is non-idle! display spinner!
    Failed to open /dev/dbox/fp0
    [Harddisk] enumerating block devices...
    [Harddisk] enumerating network mounts...
    Reading cables.xml
    Reading terrestrial.xml
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr Philips CU1216Mk3, need rotorw                                             orkaround No, enabled Yes, DVB-S2 No
    sec config completed
    [NimManager] slot name=Philips CU1216Mk3
    [NimManager] multiType = True
    [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/et                                             c/enigma2/resumepoints.pkl'
    [Time By]: Transponder
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xm                                             l
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xm                                             l
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xm                                             l
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (                                             Regular)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (                                             RegularLight)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD                                             )
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    Unknown device type: dreambox front panel
    [iInputDevices] setRepeat for device event0 to 100 ms
    [iInputDevices] setDelay for device event0 to 700 ms
    [iInputDevices] setRepeat for device event1 to 100 ms
    [iInputDevices] setDelay for device event1 to 700 ms
    [iInputDevices] setRepeat for device event2 to 100 ms
    [iInputDevices] setDelay for device event2 to 700 ms
    [iInputDevices] setRepeat for device event3 to 100 ms
    [iInputDevices] setDelay for device event3 to 700 ms
    [iInputDevices] setRepeat for device event4 to 100 ms
    [iInputDevices] setDelay for device event4 to 700 ms
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [VideoMode] setting scaler_sharpness to: 0000000D
    [VideoMode] setMode - port: HDMI, mode: 720p, rate: 50Hz
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    couldn't open /proc/stb/misc/12V_output
    [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat
    setLCDBrightness 25
    setLCDBrightness 127
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    [dFLASH] Dreambox: !dm800!
    [dFLASH] /tmp/dflash.sh created
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: Dreambox
    [Info-Panel] machinename: dm800
    [Info-Panel] oem name:
    [Info-Panel] boxtype: dm800
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting color_soace to: Edid(Auto)
    --> applying pep values
    [AutoTimer] Auto Poll Enabled
    starting hotplug handler
    wasTimerWakeup failed!
    [NAVIGATION] wasTimerWakeup = False
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    [dFLASH] autostart
    [dFLASH] Webif not found
    EMC: +++ EMC V3.7.4beta20131015 startup
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fr 07 Mär 2014 15:37                                             :36 CET
    ('de_DE', ('Deutsch', 'de', 'DE'))
    Screen <class 'Screens.VideoWizard.VideoWizard'>((), {}): <type 'exceptions.IOEr                                             ror'>
    Traceback (most recent call last):
      File "/usr/lib/enigma2/python/mytest.py", line 250, in create
        return screen(self, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/Screens/VideoWizard.py", line 83, in __init__
      File "/usr/lib/enigma2/python/Screens/Rc.py", line 27, in __init__
      File "/usr/lib/enigma2/python/Screens/Rc.py", line 45, in readPositions
      File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 611, in __init__
      File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 647, in parse
    IOError: [Errno 2] No such file or directory: '/usr/share/enigma2/rc_models/dmm1                                             /rcpositions.xml'
    open /dev/dbox/fp0 for wakeup timer clear failed!(No such file or directory)
    EXCEPTION IN PYTHON STARTUP CODE:
    ------------------------------------------------------------
    Traceback (most recent call last):
      File "/usr/lib/enigma2/python/mytest.py", line 745, in <module>
        runScreenTest()
      File "/usr/lib/enigma2/python/mytest.py", line 527, in runScreenTest
        runNextScreen(session, screensToRun)
      File "/usr/lib/enigma2/python/mytest.py", line 523, in runNextScreen
        session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[                                             1:]), screen, *args)
      File "/usr/lib/enigma2/python/mytest.py", line 324, in openWithCallback
        dlg = self.open(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 335, in open
        dlg.isTmp = True
    AttributeError: 'NoneType' object has no attribute 'isTmp'
    open /dev/dbox/fp0 for wakeup timer clear failed!(No such file or directory)
    ------------------------------------------------------------
    (exit code 5)
    main thread is non-idle! display spinner!
    ---- saving lame channel db
    saved 112 channels and 1718 services!
    release cached channel (timer timeout)
    thread joined 0
    set RTC to previous valid time
    [eDVBLocalTimerHandler] set RTC Time
    - (41) eServiceFactoryDVD
    - (41) eServiceFactoryHDMI
    - (41) eServiceFactoryM2TS
    - (41) eServiceFactoryMP3
    - (41) eServiceFactoryFS
    - (41) eServiceFactoryDVB
    - (40) eServiceCenter
    - (36) Stream server
    - (35) CI Slots
    - (35) CA handler
    - (30) eActionMap
    - (22) Hdmi CEC driver
    - (21) input device driver
    - (20) DVB-CI UI
    - (20) UHF Modulator
    - (20) RC Input layer
    - (20) misc options
    - (20) AVSwitch Driver
    - (15) eWindowStyleManager
    - (10) gRC
    waiting for gRC thread shutdown
    gRC thread has finished
    - (9) GFBDC
    setting /dev/tty0 status failed.
    - (9) gLCDDC
    - (9) Font Render Class
    - (8) graphics acceleration manager
    - (5) Tuxtxt
    - (1) Background File Eraser
    reached rl -1
    root@dm800:/usr/share/enigma2#

  5. #25

    Registriert seit
    06.03.2014
    Beiträge
    30
    Thanks (gegeben)
    3
    Thanks (bekommen)
    41
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    I added --force to:

    Code:
     root@dm800:/etc/modules-load.d# cat dreambox-dvb-modules-dm800.conf
    --force lcd
    --force bcm7401
    --force dreambox_keyboard
    This is only a workaround to get it working - all modules are loading while startup. Cleanup will follow later - first it has to work
    I think patching 4.6 to 4.8 would be the best way. I'll hack it into the recipe later on.

  6. #26
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    ah ok i fix it in branding git


    openATV we are open Source

    Boykott GPL violator

  7. #27

    Registriert seit
    06.03.2014
    Beiträge
    30
    Thanks (gegeben)
    3
    Thanks (bekommen)
    41
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    wenn das änderungen in einem pythonfile sind bitte eben fix hier posten - dann kann ich das direkt auf der Box zum testen machen.
    bin remote bei Darkstar drauf - habe selbst keine (nur eine Gigablue)

  8. #28
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke


    openATV we are open Source

    Boykott GPL violator

  9. #29
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke
    ne da fehlt im image nur der ordner

    da die Variablen gefehlt hatten hat das make den ordner nicht eingebaut


    openATV we are open Source

    Boykott GPL violator

  10. #30
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    14.861
    Thanks (gegeben)
    763
    Thanks (bekommen)
    21090
    Themenstarter
    Total Downloaded
    162,47 MB
    Total Downloaded
    162,47 MB
    ReceiverDanke


    openATV we are open Source

    Boykott GPL violator


Seite 3 von 6 ErsteErste 12345 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 00:51 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,88%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com