Ergebnis 21 bis 30 von 60
-
07.03.2014, 14:28 #21
-
Advertising
-
07.03.2014, 14:29 #22
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterthen hex mod works we can make in bb file with a sed to replace 4.6 with 4.8
openATV we are open Source
Boykott GPL violator
-
07.03.2014, 14:30 #23
- Registriert seit
- 17.01.2014
- Beiträge
- 64
- Thanks (gegeben)
- 12
- Thanks (bekommen)
- 17
- Total Downloaded
- 363,2 KB
- Total Downloaded
- 363,2 KB
I see, but is the "force" being done after the box has been started?
In that case it's best to hex edit the modules like captain suggested or try to set CONFIG_MODVERSIONS when building the kernel.
Imo its not good to load the drivers with force on a later state.
Also if the drivers don't load automatically at boot time, there is no bootlogo being presented.
Anyway keep it up!
This will be the most updated image everGeändert von MastaG (07.03.2014 um 14:42 Uhr)
-
07.03.2014, 14:38 #24
- Registriert seit
- 06.03.2014
- Beiträge
- 30
- Thanks (gegeben)
- 3
- Thanks (bekommen)
- 41
- Total Downloaded
- 0
- Total Downloaded
- 0
Code:root@dm800:/usr/share/enigma2# enigma2 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 16384k video mem setting /dev/tty0 status failed. - double buffering available! 9184kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) + (9) gLCDDC lcd buffer 0x777da8 8448 bytes, stride 132 LCD resolution: 132 x 64 x 8 (stride: 132) + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "dreambox front panel" is a remotecontrol Input device "dreambox remote control (native)" is a remotecontrol Input device "dreambox advanced remote control (native)" is a remotecontrol Input device "dreambox ir keyboard" is a keyboard Input device "dreambox ir mouse" is a mouse Found 5 input devices. + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. cannot open /proc/stb/tsmux/input0 cannot open /proc/stb/tsmux/input1 done, found 0 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryHDMI + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 112 channels/transponders and 1718 services scanning for frontends.. opening frontend 0 close frontend 0 found 1 adapter, 1 frontends(1 sim) and 4 demux, boxtype 1 Use valid Linux Time :) (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png found 6 spinner! executing main setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! Failed to open /dev/dbox/fp0 [Harddisk] enumerating block devices... [Harddisk] enumerating network mounts... Reading cables.xml Reading terrestrial.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Philips CU1216Mk3, need rotorw orkaround No, enabled Yes, DVB-S2 No sec config completed [NimManager] slot name=Philips CU1216Mk3 [NimManager] multiType = True [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/et c/enigma2/resumepoints.pkl' [Time By]: Transponder [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic) [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold) [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xm l [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xm l [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xm l [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK ( Regular) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK ( RegularLight) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD ) [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) Unknown device type: dreambox front panel [iInputDevices] setRepeat for device event0 to 100 ms [iInputDevices] setDelay for device event0 to 700 ms [iInputDevices] setRepeat for device event1 to 100 ms [iInputDevices] setDelay for device event1 to 700 ms [iInputDevices] setRepeat for device event2 to 100 ms [iInputDevices] setDelay for device event2 to 700 ms [iInputDevices] setRepeat for device event3 to 100 ms [iInputDevices] setDelay for device event3 to 700 ms [iInputDevices] setRepeat for device event4 to 100 ms [iInputDevices] setDelay for device event4 to 700 ms Activating keymap: Default (US) Activating language Deutsch [VideoMode] setting aspect: 16:9 [VideoMode] setting wss: auto [VideoMode] setting policy: panscan [VideoMode] setting policy2: letterbox [VideoMode] setting scaler_sharpness to: 0000000D [VideoMode] setMode - port: HDMI, mode: 720p, rate: 50Hz [EPGC Load] Poller disabled. [EPGC Save] Poller disabled. [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat' [EPGC] time updated.. start EPG Mainloop couldn't open /proc/stb/misc/12V_output [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat setLCDBrightness 25 setLCDBrightness 127 Setting OSD position: 0 720 0 576 Setting OSD alpha: 255 [EPGC Save] Poller disabled. [EPGC Load] Poller disabled. [dFLASH] Dreambox: !dm800! [dFLASH] /tmp/dflash.sh created [Ipkg] Added to OPKG destinations: / [Info-Panel] machinebrand: Dreambox [Info-Panel] machinename: dm800 [Info-Panel] oem name: [Info-Panel] boxtype: dm800 --> setting contrast to: 00008000 --> setting saturation to: 00008000 --> setting hue to: 00008000 --> setting brightness to: 00008000 --> setting block_noise_reduction to: 00000000 --> setting mosquito_noise_reduction to: 00000000 --> setting digital_contour_removal to: 00000000 --> setting color_soace to: Edid(Auto) --> applying pep values [AutoTimer] Auto Poll Enabled starting hotplug handler wasTimerWakeup failed! [NAVIGATION] wasTimerWakeup = False Setvolume: 100 100 (raw) Setvolume: 0 0 (-1db) [dFLASH] autostart [dFLASH] Webif not found EMC: +++ EMC V3.7.4beta20131015 startup [AutoBouquetsMaker] AutoStart Enabled [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Fr 07 Mär 2014 15:37 :36 CET ('de_DE', ('Deutsch', 'de', 'DE')) Screen <class 'Screens.VideoWizard.VideoWizard'>((), {}): <type 'exceptions.IOEr ror'> Traceback (most recent call last): File "/usr/lib/enigma2/python/mytest.py", line 250, in create return screen(self, *arguments, **kwargs) File "/usr/lib/enigma2/python/Screens/VideoWizard.py", line 83, in __init__ File "/usr/lib/enigma2/python/Screens/Rc.py", line 27, in __init__ File "/usr/lib/enigma2/python/Screens/Rc.py", line 45, in readPositions File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 611, in __init__ File "/usr/lib/python2.7/xml/etree/ElementTree.py", line 647, in parse IOError: [Errno 2] No such file or directory: '/usr/share/enigma2/rc_models/dmm1 /rcpositions.xml' open /dev/dbox/fp0 for wakeup timer clear failed!(No such file or directory) EXCEPTION IN PYTHON STARTUP CODE: ------------------------------------------------------------ Traceback (most recent call last): File "/usr/lib/enigma2/python/mytest.py", line 745, in <module> runScreenTest() File "/usr/lib/enigma2/python/mytest.py", line 527, in runScreenTest runNextScreen(session, screensToRun) File "/usr/lib/enigma2/python/mytest.py", line 523, in runNextScreen session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[ 1:]), screen, *args) File "/usr/lib/enigma2/python/mytest.py", line 324, in openWithCallback dlg = self.open(screen, *arguments, **kwargs) File "/usr/lib/enigma2/python/mytest.py", line 335, in open dlg.isTmp = True AttributeError: 'NoneType' object has no attribute 'isTmp' open /dev/dbox/fp0 for wakeup timer clear failed!(No such file or directory) ------------------------------------------------------------ (exit code 5) main thread is non-idle! display spinner! ---- saving lame channel db saved 112 channels and 1718 services! release cached channel (timer timeout) thread joined 0 set RTC to previous valid time [eDVBLocalTimerHandler] set RTC Time - (41) eServiceFactoryDVD - (41) eServiceFactoryHDMI - (41) eServiceFactoryM2TS - (41) eServiceFactoryMP3 - (41) eServiceFactoryFS - (41) eServiceFactoryDVB - (40) eServiceCenter - (36) Stream server - (35) CI Slots - (35) CA handler - (30) eActionMap - (22) Hdmi CEC driver - (21) input device driver - (20) DVB-CI UI - (20) UHF Modulator - (20) RC Input layer - (20) misc options - (20) AVSwitch Driver - (15) eWindowStyleManager - (10) gRC waiting for gRC thread shutdown gRC thread has finished - (9) GFBDC setting /dev/tty0 status failed. - (9) gLCDDC - (9) Font Render Class - (8) graphics acceleration manager - (5) Tuxtxt - (1) Background File Eraser reached rl -1 root@dm800:/usr/share/enigma2#
-
07.03.2014, 14:40 #25
- Registriert seit
- 06.03.2014
- Beiträge
- 30
- Thanks (gegeben)
- 3
- Thanks (bekommen)
- 41
- Total Downloaded
- 0
- Total Downloaded
- 0
I added --force to:
Code:root@dm800:/etc/modules-load.d# cat dreambox-dvb-modules-dm800.conf --force lcd --force bcm7401 --force dreambox_keyboard
I think patching 4.6 to 4.8 would be the best way. I'll hack it into the recipe later on.
-
07.03.2014, 14:40 #26
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterah ok i fix it in branding git
openATV we are open Source
Boykott GPL violator
-
07.03.2014, 14:47 #27
- Registriert seit
- 06.03.2014
- Beiträge
- 30
- Thanks (gegeben)
- 3
- Thanks (bekommen)
- 41
- Total Downloaded
- 0
- Total Downloaded
- 0
wenn das änderungen in einem pythonfile sind bitte eben fix hier posten - dann kann ich das direkt auf der Box zum testen machen.
bin remote bei Darkstar drauf - habe selbst keine (nur eine Gigablue)
-
07.03.2014, 14:49 #28
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarter
openATV we are open Source
Boykott GPL violator
-
07.03.2014, 14:50 #29
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterne da fehlt im image nur der ordner
da die Variablen gefehlt hatten hat das make den ordner nicht eingebaut
openATV we are open Source
Boykott GPL violator
-
07.03.2014, 14:52 #30
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarter
openATV we are open Source
Boykott GPL violator
Lesezeichen