Thanks Thanks:  2
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 12
  1. #1
    Anfänger
    Registriert seit
    25.12.2013
    Beiträge
    7
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten

    My HDD is after restart not present or must have a format

    I have installed the OpenATV image on my P+ and there were no problems. So after that I formated my internal harddisk, it was recognised and I could use it. When I try to use the Hdd again after a restart a message appears on the screen that tells me there is no harddisk found or formated. Can someone please help me? I am sorry that ask my question in English because I can't write German very well, but I can understand it when you answer me. Thank you.

    •   Alt Advertising

       

  2. #2
    Avatar von Pike_Bishop
    Registriert seit
    05.09.2013
    Ort
    here and there
    Beiträge
    2.840
    Total Downloaded
    155,15 MB
    Total Downloaded
    155,15 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD 2400
     
     
    Box 2:
    VU+ Ultimo 4K
     
     
    Box 3:
    VDR
     
     
    Box 4:
    VDR
     
     
    Hi Eddyx,

    in which format have you formated your harddisc - ext3, ext4 or what ?
    and have you formated your harddisc directly on your box or with telnet or on your computer ?
    what says the telnet commands;
    Code:
    blkid
    and also;
    Code:
    mount
    when your harddisc isn't present and also if they is present ?

    regards
    Biki3

  3. #3
    Anfänger
    Registriert seit
    25.12.2013
    Beiträge
    7
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Thank you very much for your answer. As you asked me I have used the Telnet commands after I formated my HDD (using the ATV-menu)with following result:
    openatv 3.1 azboxhd

    azboxhd login: root
    Last login: Thu Dec 26 16:01:33 +0100 2013 on /dev/pts/0.
    root@azboxhd:~# blkid
    /dev/hda1: UUID="6b9595b3-a17a-42fd-871c-beeaa95473c6" TYPE="ext3"
    /dev/hda2: UUID="c5af117b-8709-4579-873d-81ebe9b60095" TYPE="ext2"
    /dev/hda3: UUID="e1307a65-6cc6-455d-9637-1f0445b48c6d" TYPE="swap"
    /dev/hdb1: UUID="5ac471a3-6455-497f-9af6-8ef4f51b0a79" TYPE="ext3"
    /dev/mtdblock3: LABEL="YAMON_XRPC" TYPE="romfs"
    /dev/mtdblock4: LABEL="MIPS_LINUX_XRPC" TYPE="romfs"
    root@azboxhd:~# mount
    rootfs on / type rootfs (rw)
    /dev/hda1 on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordere d)
    proc on /proc type proc (rw,relatime)
    sysfs on /sys type sysfs (rw,relatime)
    tmpfs on /media type tmpfs (rw,relatime,size=64k)
    devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
    tmpfs on /var/volatile type tmpfs (rw,relatime)
    usbfs on /proc/bus/usb type usbfs (rw,relatime)
    automount(pid619) on /autofs type autofs (rw,relatime,fd=4,pgrp=619,timeout=5,mi
    nproto=2,maxproto=4,indirect)
    /dev/hdb1 on /media/hdd type ext3 (rw,relatime,errors=continue,user_xattr,barrie
    r=1,data=ordered)
    root@azboxhd:~#
    As you can see hdb1 is mounted but after a restart those commands give next results:
    Welcome to openATV for azboxhd
    openatv 3.1 azboxhd

    azboxhd login: root
    Last login: Thu Dec 26 16:40:37 +0100 2013 on /dev/pts/0.
    root@azboxhd:~# blkid
    /dev/hda1: UUID="6b9595b3-a17a-42fd-871c-beeaa95473c6" TYPE="ext3"
    /dev/hda2: UUID="c5af117b-8709-4579-873d-81ebe9b60095" TYPE="ext2"
    /dev/hda3: UUID="e1307a65-6cc6-455d-9637-1f0445b48c6d" TYPE="swap"
    /dev/hdb1: UUID="5ac471a3-6455-497f-9af6-8ef4f51b0a79" SEC_TYPE="ext2" TYPE="ext
    3"
    /dev/mtdblock3: LABEL="YAMON_XRPC" TYPE="romfs"
    /dev/mtdblock4: LABEL="MIPS_LINUX_XRPC" TYPE="romfs"
    root@azboxhd:~# mount
    rootfs on / type rootfs (rw)
    /dev/hda1 on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordere d)
    proc on /proc type proc (rw,relatime)
    sysfs on /sys type sysfs (rw,relatime)
    tmpfs on /media type tmpfs (rw,relatime,size=64k)
    devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
    tmpfs on /var/volatile type tmpfs (rw,relatime)
    usbfs on /proc/bus/usb type usbfs (rw,relatime)
    Even if I add the line: UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79 /media/hdd auto defaults 0 0
    to the fstab file in the directory ETC nothing changes. Maybe here I do something wrong, can you please help me?
    rootfs / auto defaults 1 1
    proc /proc proc defaults 0 0
    devpts /dev/pts devpts mode=0620,gid=5 0 0
    usbdevfs /proc/bus/usb usbdevfs noauto 0 0
    tmpfs /var/volatile tmpfs defaults 0 0
    usbfs /proc/bus/usb usbfs defaults 0 0
    /dev/hda3 swap swap defaults 0 0
    UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79 /media/hdd auto defaults 0 0
    Thank you!

  4. #4
    Avatar von Pike_Bishop
    Registriert seit
    05.09.2013
    Ort
    here and there
    Beiträge
    2.840
    Total Downloaded
    155,15 MB
    Total Downloaded
    155,15 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD 2400
     
     
    Box 2:
    VU+ Ultimo 4K
     
     
    Box 3:
    VDR
     
     
    Box 4:
    VDR
     
     
    Hi Eddyx,

    normally your fstab entry for your /dev/hdb1 looks correct
    but you can try this in your /etc/fstab;
    Code:
    UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79    /media/hdd    auto   rw,data=ordered   0  0
    or if it doesn't work this;
    Code:
    UUID="5ac471a3-6455-497f-9af6-8ef4f51b0a79"    /media/hdd    auto   rw,data=ordered   0  0
    also you must edit yor fstab only with a linux editor as example you can use Notepad++
    and after the last line in your fstab you must have an empty line too.

    at last you must restart your box complete.

    if you have problems to edit your /etc/fstab then you can make a .zip file and attach it here
    then i will edit it for you.

    did you mount your ext3 formated hdd with the ext4 driver or want you mount it with the ext3 driver ?
    if you want to use the ext3 driver (as i do it too) you must also install the ext3 modul, you can have a look how the ext3 driver is named with the following telnet command;
    Code:
    opkg list | grep ext3
    here then comes the following output;
    Code:
    kernel-module-ext3 - 3.8.7-r0 - linux-etxx00 version 3.8.7-r0  ext3 kernel modul
    e; Second Extended
    if i want to install it then i need the following telnet commands;
    Code:
    opkg update
    opkg install kernel-module-ext3
    and at last a complete restart of my box.

    if you want to use the ext3 driver and you have install it then you can try fstab entries as following;
    Code:
    UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79    /media/hdd    ext3   rw,data=ordered   0  0
    or;
    Code:
    UUID="5ac471a3-6455-497f-9af6-8ef4f51b0a79"    /media/hdd    ext3   rw,data=ordered   0  0
    regards
    Biki3
    Geändert von Pike_Bishop (26.12.2013 um 23:21 Uhr)

  5. #5
    Anfänger
    Registriert seit
    25.12.2013
    Beiträge
    7
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Hi ,

    Thank for all your information. I have followed your instructions and have use Notepad++ 6.5.2 to edit the fstab file and add the line (with and without exclamation marks) and leaved an empty line

    I followed your instructions and used Notepad++ 6.5.2to edit the fstab file and to add the following line: UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79 /media/hdd auto rw,data=ordered 0 0 (without and with exclamation points). I left an additional line free. After a complete startup the hard disk was still not recognized.

    I also have performed the telnet command: opkg list | grep ext3 and I got no output.
    About the commands: opkg update and opkg install kernel-module-ext3, I got following output:

    Welcome to openATV for azboxhd
    openatv 3.1 azboxhd

    azboxhd login: root
    root@azboxhd:~# opkg update
    Downloading http://feeds.mynonpublic.com/3.1/azb...ty/Packages.gz.
    Inflating http://feeds.mynonpublic.com/3.1/azb...ty/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/openatv-3rdparty.
    Downloading http://feeds.mynonpublic.com/3.1/azb...ll/Packages.gz.
    Inflating http://feeds.mynonpublic.com/3.1/azb...ll/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/openatv-all.
    Downloading http://feeds.mynonpublic.com/3.1/azb...hd/Packages.gz.
    Inflating http://feeds.mynonpublic.com/3.1/azb...hd/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/openatv-azboxhd.
    Downloading http://feeds.mynonpublic.com/3.1/azb...ty/Packages.gz.
    Inflating http://feeds.mynonpublic.com/3.1/azb...ty/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/openatv-azboxhd_3rdparty.
    Downloading http://feeds.mynonpublic.com/3.1/azb...el/Packages.gz.
    Inflating http://feeds.mynonpublic.com/3.1/azb...el/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/openatv-mips32el.
    Downloading http://enigma2.world-of-satellite.co...am/Packages.gz.
    Inflating http://enigma2.world-of-satellite.co...am/Packages.gz.
    Updated list of available packages in /var/lib/opkg/lists/ocram-picons.
    root@azboxhd:~# opkg install kernel-module-ext3
    Unknown package 'kernel-module-ext3'.
    Collected errors:
    * opkg_install_cmd: Cannot install package kernel-module-ext3.

    My apologies that I have to disturb you again, but I really have tried everything. Maybe it helps if I can download somewhere the ext3 kernel module and install it by using telnet. Do you have any advice. In any case, thanks for that.

  6. #6
    Avatar von Pike_Bishop
    Registriert seit
    05.09.2013
    Ort
    here and there
    Beiträge
    2.840
    Total Downloaded
    155,15 MB
    Total Downloaded
    155,15 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD 2400
     
     
    Box 2:
    VU+ Ultimo 4K
     
     
    Box 3:
    VDR
     
     
    Box 4:
    VDR
     
     
    Hi Eddyx,

    first a question as following;
    what hdd is this which makes the problems - is it an internal hdd or an external hdd with usb ?

    if it is an external usb hdd is they directly connected by an usb port on your box or do you use an usb-hub and the usb hdd is connected first on the usb-hub ?
    this questions are therefore because i know users they have the same problems as you and fault was mostly the usb-hub.


    I also have performed the telnet command: opkg list | grep ext3 and I got no output.
    if you got no output then it's possible that it gives no ext3 modul (driver) for your box - but i don't know i have another box et9000
    maybe a user with a azbox can say what to this, but it's not so important it must also works without ext3 modul (driver) and auto in fstab.

    if your hdd isn't present can you mount it manually in telnet with following telnet command ?;
    Code:
    mount UUID=5ac471a3-6455-497f-9af6-8ef4f51b0a79 /media/hdd
    after that you can check if your hdd is mounted now with the telnet command;
    Code:
    mount
    and nor a last question - which hdd model is this exactly ?

    regards
    Biki3
    Geändert von Pike_Bishop (28.12.2013 um 20:52 Uhr)

  7. #7
    Anfänger
    Registriert seit
    25.12.2013
    Beiträge
    7
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Hi, again thanks for your explanation. Anqwers on your questions: the hard disk installed is an internal hard disk Samsung HD103SI 1 TB Serial ATA300 is.
    After your last answer I have formated the hard disk again, using the blue button menu. After that, the HD mounted immediately (ext3). I could record, make backups and approach it via FTP. In the Media directory there was a DIR HDD created and there was also a DomExtender DIR present. When I restarted the box completely, the HD was no longer mounted. Also the DIR HD was cleared from the DIR Media.
    The output for the command: root@azboxhd:~# mount UUID= b3db7b5b-692f-44a1-92df-5aabbca032ea /media/hdd
    BusyBox v1.19.4 (2013-12-13 08:20:19 CET) multi-call binary.

    Usage: mount [OPTIONS] [-o OPTS] DEVICE NODE

    Mount a filesystem. Filesystem autodetection requires /proc.

    -a Mount all filesystems in fstab
    -i Don't run mount helper
    -r Read-only mount
    -w Read-write mount (default)
    -t FSTYPE Filesystem type
    -O OPT Mount only filesystems with option OPT (-a only)
    -o OPT:
    loop Ignored (loop devices are autodetected)
    [a]sync Writes are [a]synchronous
    [no]atime Disable/enable updates to inode access times
    [no]diratime Disable/enable atime updates to directories
    [no]relatime Disable/enable atime updates relative to modification ti
    me
    [no]dev (Dis)allow use of special device files
    [no]exec (Dis)allow use of executable files
    [no]suid (Dis)allow set-user-id-root programs
    [r]shared Convert [recursively] to a shared subtree
    [r]slave Convert [recursively] to a slave subtree
    [r]private Convert [recursively] to a private subtree
    [un]bindable Make mount point [un]able to be bind mounted
    [r]bind Bind a file or directory [recursively] to another locati
    on
    move Relocate an existing mount point
    remount Remount a mounted filesystem, changing flags
    ro/rw Same as -r/-w

    There are filesystem-specific -o flags.

    root@azboxhd:~# mount UUID=b3db7b5b-692f-44a1-92df-5aabbca032ea /media/hdd
    NTFS signature is missing.
    Failed to mount '/dev/hdb1': Invalid argument
    The device '/dev/hdb1' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
    mount: mounting /dev/hdb1 on /media/hdd failed: No such file or directory
    root@azboxhd:~# mount hdb1 media/hd
    ntfs-3g: Failed to access volume 'hdb1': No such file or directory

    ntfs-3g 2011.4.12 integrated FUSE 27 - Third Generation NTFS Driver
    Configuration type 1, XATTRS are on, POSIX ACLS are off

    Copyright (C) 2005-2007 Yura Pakhuchiy
    Copyright (C) 2006-2009 Szabolcs Szakacsits
    Copyright (C) 2007-2011 Jean-Pierre Andre
    Copyright (C) 2009 Erik Larsson

    Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>

    Options: ro (read-only mount), remove_hiberfile, uid=, gid=,
    umask=, fmask=, dmask=, streams_interface=.
    Please see the details in the manual (type: man ntfs-3g).

    Example: ntfs-3g /dev/sda1 /mnt/windows

    root@azboxhd:~# mount dev/hdb1 media/hd ext3
    BusyBox v1.19.4 (2013-12-13 08:20:19 CET) multi-call binary.

    Usage: mount [OPTIONS] [-o OPTS] DEVICE NODE

    Mount a filesystem. Filesystem autodetection requires /proc.

    -a Mount all filesystems in fstab
    -i Don't run mount helper
    -r Read-only mount
    -w Read-write mount (default)
    -t FSTYPE Filesystem type
    root@azboxhd:~# mount UUID=b3db7b5b-692f-44a1-92df-5aabbca032ea /media/hdd
    NTFS signature is missing.
    Failed to mount '/dev/hdb1': Invalid argument
    The device '/dev/hdb1' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
    mount: mounting /dev/hdb1 on /media/hdd failed: No such file or directory
    root@azboxhd:~#
    With other images (OpenRSI and OpenSpa) I have not that problem. Maybe the problem is spccific for an AZbox Premium +? Thank you again for your patience and work


  8. #8
    Anfänger
    Registriert seit
    25.12.2013
    Beiträge
    7
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    I've found something. I used the telnet command mkfs.ext3 /dev/hdb1 to format my HD again. So when it was done I created a Dir hdd in the Dir media and a Dir movie in the Dir hdd (chmod 755 or 777). Than I give in telnet the command mount /dev/hdb1 /media/hdd. At that moment I can use the HD again. My question is now: when I restart the box both directories hdd and movie are autom. deleted. When I create them again and chmod 755 and repeat the mount command in telnet , I can use the HD again. How can I make both directories permanent en mount hdb1 auto?
    Thanx

  9. #9
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    9.575
    Total Downloaded
    592,83 MB
    Total Downloaded
    592,83 MB
    ReceiverDankeAktivitäten
    Box 1:
    GigaBlue Q-SSC / Q+-SSC / weitere
     
     
    Box 2:
    DM900uhd-SS / Vu+Duo
     
     
    Box 3:
    Sogno 800HD Revo Triple 8800HD-SS
     
     
    Box 4:
    E4HD FormF3 AX Triplex VIP2-CC
     
     
    Box 5:
    diverse andere . . .
     
     
    Everything in /media ist handled by autofs. So after Reboot manual Changes normally are gone. That's normal.
    After formating the harddisk, it gets a new blkid, which should be placed in fstab and then it will be reproducible.
    Geändert von Papi2000 (30.12.2013 um 22:56 Uhr)
    Grüßle
    Ralf
    ------------------------------------------------------------------------------------------------------------------------
    Gigablue Quad 4K-multi,Quad+-SSC,Quad-SSC, andere Gigas, Astra 19.2E, UniCable & KabelBW, oATV/ OpenMips
    (weitere: DM900uhd,Vu+Duo,Technisat,Edision),PC-DVB-S/C/T,PCH-A110,Xtreamer,BDP5200
    UE32C5700,UE65HU7590,LG42R51
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  10. #10
    Avatar von Pike_Bishop
    Registriert seit
    05.09.2013
    Ort
    here and there
    Beiträge
    2.840
    Total Downloaded
    155,15 MB
    Total Downloaded
    155,15 MB
    ReceiverDankeAktivitäten
    Box 1:
    Mutant HD 2400
     
     
    Box 2:
    VU+ Ultimo 4K
     
     
    Box 3:
    VDR
     
     
    Box 4:
    VDR
     
     
    Hi Eddyx,

    Code:
    mount UUID= b3db7b5b-692f-44a1-92df-5aabbca032ea /media/hdd 
    this can't work because you have a whitespace after UUID=
    and also it's the same probs as you have when you want mount it with mount /dev/hdb1 /media/hdd and the directory /media/hdd isn't present
    but with;
    Code:
    mkdir /media/hdd
    mount UUID=b3db7b5b-692f-44a1-92df-5aabbca032ea /media/hdd
    it must work then if this uuid is the correct one.

    and @Papi2000 is right - if you make partitions or format your hdd always the uuid is changing
    maybe it is the problem that you have a wrong uuid in your fstab because you have formated the hdd again.

    give me your fstab (attach it as .zip file) and again the output from the telnet command;
    Code:
    blkid
    so that can i see your actual uuid to this hdd
    and then i will make an fstab entry for you.

    if this want works again i can make a workarround for you with a cronjob and scripts as last idea.
    for that i lets make a cronjob with an init script and this job starts another script which looks as your hdd is mounted and if not it
    makes the directory /media/hdd and mount your hdd and after correct mounting the same script deletes the cronjob.


    regards
    Biki3
    Geändert von Pike_Bishop (30.12.2013 um 21:00 Uhr)

  11. Thanks Eddyx bedankten sich

Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 02:17 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com