Thanks Thanks:  0
Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 13
  1. #1
    Anfänger
    Registriert seit
    29.11.2013
    Beiträge
    11
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke

    Blindscan doesn't work

    Blindscan doesn't seem to work.
    4.9E finds 20-30channels
    39E stuck at step 1/4

    OpenAtv version 4.2
    Update 28/9/2014

    •   Alt Advertising

       

  2. #2
    Avatar von ravemaster
    Registriert seit
    26.07.2013
    Ort
    Austria
    Beiträge
    488
    Thanks (gegeben)
    225
    Thanks (bekommen)
    116
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Box 1:
    Edision Optimus OS2+
     
     
    Box 2:
    Edision Optimus OS2+
     
     
    Box 3:
    Octagon SF8008 Mini 4K
     
     
    I think that's an Driverproblem. I don't think we can get new drivers, cause the_ripper isn't reachable for a few month.

  3. #3
    Anfänger
    Registriert seit
    29.11.2013
    Beiträge
    11
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Is there any way to find if this is a driver problem?Maybe i use some telnet commands to post them here to see what is the problem?

  4. #4
    Avatar von ravemaster
    Registriert seit
    26.07.2013
    Ort
    Austria
    Beiträge
    488
    Thanks (gegeben)
    225
    Thanks (bekommen)
    116
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Box 1:
    Edision Optimus OS2+
     
     
    Box 2:
    Edision Optimus OS2+
     
     
    Box 3:
    Octagon SF8008 Mini 4K
     
     
    You can try to make a Log with putty.

  5. #5
    Anfänger
    Registriert seit
    29.11.2013
    Beiträge
    11
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    I think that blindscan from openatv 4.1 worked fine
    Since my latest post,blindscan updated 3-4 times
    From putty(i paste only the section about blindscan.I dont know if you want all the log)
    1st blindscan stucked at step 1/4 for half an hour and stucked at this point
    Code:
    prepared command : [avl_azbox_blindscan 950 1950 2 45 1 0 0 2]
    [SCREENNAME]  ['MessageBox_summary', 'SimpleSummary']
    [SCREENNAME]  ['MessageBox']
    set sequence pos 3
    set sequence pos 3
    [SEC] update current switch params
    [SEC] startTuneTimeout 20000
    [SEC] setFrontend 1
    setting frontend 0
    FE_SET_PROPERTY failed: Invalid argument
    [SEC] sleep 500ms
    (0)fe event: status 0, inversion off, m_tuning 1
    OURSTATE: failed, fatal
    I rebooted the Azbox ME and i start again the blindscan
    The putty log is here
    putty.log
    Now i think blindscan worked.I think.

  6. #6
    Anfänger
    Registriert seit
    13.11.2014
    Beiträge
    2
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Hi to all,I'm testing blind scan on AzBox Me with 4.2 version and I have found the following issues:1, The most important problem is that it does not work when the scanned frequencies are at the ramge 12500-12750. Transponders are detected but no channels are memorized. A blindscan file is created at /tmp with the found transponders but no channels are stored.2. Depending on the version, sometimes it does not find any frequency (hangs) and it is necessary to restart the scan or reboot the receiver. Tiniebla

  7. #7
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Can you try to log the problem?

  8. #8
    Anfänger
    Registriert seit
    13.11.2014
    Beiträge
    2
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Yes, i have updated the system and I realized the blind-scan, I'm attaching the dmesg log and the blind scan log from the tmp. I have realized two scans, one at 11470-11700 range (blind1.txt) and the other 12500-12750 (blind2. txt). The first scan (11470-11700) worked well, but the other as I reported in my previous post does not. Also, I'm attaching the generated files of the blind scan at the /tmp. Moreover, I want to point out that I just notice that I began the second blindscan (12500-12750) with a channel at 12092 frequency. After the scan stopped with no memorized channels, the channel does not work, only worked when I putted a channel at low band frequency. Could be a problem with the high band that it hangs during the blind scan???


    Tiniebla


    Angehängte Dateien Angehängte Dateien

  9. #9
    Mitglied
    Registriert seit
    18.07.2013
    Beiträge
    44
    Thanks (gegeben)
    1
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Zitat Zitat von tiniebla Beitrag anzeigen
    Yes, i have updated the system and I realized the blind-scan, I'm attaching the dmesg log and the blind scan log from the tmp. I have realized two scans, one at 11470-11700 range (blind1.txt) and the other 12500-12750 (blind2. txt). The first scan (11470-11700) worked well, but the other as I reported in my previous post does not. Also, I'm attaching the generated files of the blind scan at the /tmp. Moreover, I want to point out that I just notice that I began the second blindscan (12500-12750) with a channel at 12092 frequency. After the scan stopped with no memorized channels, the channel does not work, only worked when I putted a channel at low band frequency. Could be a problem with the high band that it hangs during the blind scan???


    Tiniebla


    is there any update on this!?

  10. #10
    Avatar von ravemaster
    Registriert seit
    26.07.2013
    Ort
    Austria
    Beiträge
    488
    Thanks (gegeben)
    225
    Thanks (bekommen)
    116
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Box 1:
    Edision Optimus OS2+
     
     
    Box 2:
    Edision Optimus OS2+
     
     
    Box 3:
    Octagon SF8008 Mini 4K
     
     
    I think that's a driver related problem. And there are no new drivers for Azboxes available.
    Ich habe keine Lösung, aber ich bewundere das Problem.


Seite 1 von 2 12 LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 21:58 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,56%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com