Thanks Thanks:  0
Ergebnis 1 bis 4 von 4
  1. #1
    Anfänger
    Registriert seit
    23.08.2014
    Beiträge
    5
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten

    Enigma2 doesn't load

    Hi everyone!

    I've installed OpenAtv4.2 but the enigma2 doesn't load. It's stuck with "VFD READY!"

    Code:
    root@azboxhd:~# dmesg
    2-Part4"
    [    1.860000] 0x000000700000-0x000000800000 : "CS2-Part5"
    [    1.870000] tango2_enet: ethernet driver for SMP863x internal mac
    [    1.880000] tango2_enet: detected phy at address 0x01
    [    1.880000] tango2_enet: mac address 00:02:14:15:c6:53
    [    1.890000] PPP generic driver version 2.4.2
    [    1.890000] PPP BSD Compression module registered
    [    1.900000] PPP Deflate Compression module registered
    [    1.940000] PPP MPPE Compression module registered
    [    1.940000] NET: Registered protocol family 24
    [    1.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.950000] ehci_hcd 0000:00:02.2: EHCI Host Controller
    [    1.960000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus numbe
    r 1
    [    1.970000] ehci_hcd 0000:00:02.2: irq 22, io mem 0x62000000
    [    1.990000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [    1.990000] hub 1-0:1.0: USB hub found
    [    2.000000] hub 1-0:1.0: 4 ports detected
    [    2.000000] tangox-ehci-hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.010000] TangoX USB initializing...
    [    2.060000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: TangoX USB 2.0
    [    2.060000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: new USB bus registered, assi
    gned bus number 2
    [    2.070000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: irq 48, io mem 0xa0021400
    [    2.100000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: USB 0.0 started, EHCI 1.00
    [    2.100000] hub 2-0:1.0: USB hub found
    [    2.110000] hub 2-0:1.0: 2 ports detected
    [    2.110000] tangox-ohci-hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.120000] TangoX USB was initialized.
    [    2.120000] Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=4
    7
    [    2.190000] tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
    [    2.190000] tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned
     bus number 3
    [    2.200000] tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
    [    2.330000] hub 3-0:1.0: USB hub found
    [    2.330000] hub 3-0:1.0: 2 ports detected
    [    2.340000] usbcore: registered new interface driver cdc_acm
    [    2.350000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
    N adapters
    [    2.350000] usbcore: registered new interface driver uas
    [    2.360000] Initializing USB Mass Storage driver...
    [    2.370000] usbcore: registered new interface driver usb-storage
    [    2.370000] USB Mass Storage support registered.
    [    2.380000] mousedev: PS/2 mouse device common for all mice
    [    2.380000] lirc_dev: IR Remote Control driver registered, major 253
    [    2.390000] IR NEC protocol handler initialized
    [    2.390000] IR RC5(x) protocol handler initialized
    [    2.400000] IR RC6 protocol handler initialized
    [    2.400000] IR JVC protocol handler initialized
    [    2.410000] IR Sony protocol handler initialized
    [    2.410000] IR RC5 (streamzap) protocol handler initialized
    [    2.420000] IR SANYO protocol handler initialized
    [    2.420000] IR MCE Keyboard/mouse protocol handler initialized
    [    2.430000] IR LIRC bridge handler initialized
    [    2.440000] usbcore: registered new interface driver btusb
    [    2.440000] usbcore: registered new interface driver usbhid
    [    2.450000] usbhid: USB HID core driver
    [    2.450000] ALSA device list:
    [    2.460000]   No soundcards found.
    [    2.460000] TCP cubic registered
    [    2.460000] NET: Registered protocol family 17
    [    2.470000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    2.470000] lib80211: common routines for IEEE802.11 drivers
    [    2.480000] lib80211_crypt: registered algorithm 'NULL'
    [    2.570000] Freeing unused kernel memory: 9528k freed
    [    3.860000] irvfd: module license 'unspecified' taints kernel.
    [    3.870000] Disabling lock debugging due to kernel taint
    [    3.880000] MICOM FP starting ...
    [    3.900000] Forcing RF MOD
    [    3.900000] RF Detected
    [    3.900000] SCART Detected
    [    4.080000] DETECTED AZBOX ELITE MODEL
    [    4.080000] input: dreambox remote control (native) as /devices/virtual/input
    /input0
    [   29.970000] kjournald starting.  Commit interval 5 seconds
    [   30.000000] EXT3-fs (hda1): using internal journal
    [   30.010000] EXT3-fs (hda1): recovery complete
    [   30.010000] EXT3-fs (hda1): mounted filesystem with ordered data mode
    [   30.350000] Algorithmics/MIPS FPU Emulator v1.5
    [   35.540000] Adding 59388k swap on /dev/hda3.  Priority:-1 extents:1 across:59
    388k
    [   36.210000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1703] i
    nit_module: begun
    [   36.250000] em8xxx0 [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_f
    acsprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1554]
    identify: board has unknown subid=0x50
    [   36.270000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1689] i
    dentify: device 0x8634 0x86 accepted with software tango2revA
    [   36.460000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1768] m
    umk_register_tasklet 0xc0d4a000
    [   36.480000] mumk_register_tasklet: (0) tasklet c0d4a000 status @c0cd9754
    [   36.490000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[0] 0xc0d4c000: pE=0xc0cd9530 ch_idx=33 module_id=0x3
    c 0xc0cd9550
    [   36.510000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[1] 0xc0d4e000: pE=0xc0cd9530 ch_idx=35 module_id=0x3
    c 0xc0cd955c
    [   36.540000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[2] 0xc0d50000: pE=0xc0cd9530 ch_idx=41 module_id=0x1
    3c 0xc0cd9568
    [   36.560000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[3] 0xc0d52000: pE=0xc0cd9530 ch_idx=43 module_id=0x1
    3c 0xc0cd9574
    [   36.580000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[4] 0xc0d54000: pE=0xc0cd9530 ch_idx=37 module_id=0x2
    3c 0xc0cd9580
    [   36.610000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[5] 0xc0d56000: pE=0xc0cd9530 ch_idx=39 module_id=0x2
    3c 0xc0cd958c
    [   36.630000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[6] 0xc0d58000: pE=0xc0cd9530 ch_idx=69 module_id=0x3
    f 0xc0cd9598
    [   36.650000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    849] I found 32 video decoders.
    [   36.670000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    866] I found 4 audio decoders.
    [   36.690000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    883] I found 2 audio capture modules.
    [   36.700000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    900] I found 6 STC.
    [   36.720000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    917] I found 3 demuxs.
    [   36.740000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    935] I found 96 outputs.
    [   36.760000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1895] i
    nit_module: done. Found 1 em8xxx
    [   36.960000] dev 8634 rev 86
    [   38.250000] nimdetect: AZBox NIM detection in progress ...
    [   38.250000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
    [   38.270000] Azbox model elite
    [   38.270000] nimdetect: Detecting tuner 0
    [   38.490000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.500000] nimdetect: ReadReg: reg=0xff (error=-1)
    [   38.520000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.520000] nimdetect: ReadReg: reg=0xfe (error=-1)
    [   38.530000] nimdetect: Detecting tuner 1
    [   38.750000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.760000] nimdetect: ReadReg: reg=0x7f (error=-1)
    [   38.990000] i2c_read_hw: wait for idle failed (concurrent access)
    [   39.000000] nimdetect: ReadReg: reg=0x0 (error=-1)
    [   39.010000] nimdetect: Total detected tuner(s) 0
    [   39.120000] sci0: SMP86xx driver loaded (freq = 3686400, interfaces = 1)
    [   39.120000] sci0: enabled smartcard interface.
    [   39.530000] SMP863x: Loading , build date:  Fri Mar 15 22:51:16 CET 2013
    [   39.550000] SMP863x: Allocating DVBAdapter memory
    [   39.570000] SMP863x: RUA Found pllad at 0
    [   39.570000] SMP863x: Setting OUT MOD
    [   39.590000] SetOutMod: EDID
    [   39.950000] Mode:   74175824, 1920,  540, 2200,  44,  88, 148, 0, 1125,  2,
    5, 15, 0, VideoTiming_1920x1080i@59.94Hz, 1
    [   39.960000] Applying output options - HDMI="HDMI_1080i59"[0:0](YCbCr 709), CA
    V="1080i59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
    [   40.210000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   40.210000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:487] ERROR(RM_FATALOU
    TOFMEMORY): Can not configure video timing
    [   40.230000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:1645] ERROR(RM_FATALO
    UTOFMEMORY): Can not apply the video timing configuration to the SMP8xxx
    [   40.250000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:1880] ERROR(RM_FATALO
    UTOFMEMORY): Can not apply display configuration to the SMP8xxx
    [   42.510000] SMP863x: Registering RFMOD char device
    [   42.630000] SMP863x: Registering frameyuv char device
    [   42.650000] SMP863x: Init DCC
    [   42.650000] SMP863x: Init Microcode DCC
    [   43.200000] SMP863x: Init GFX
    [   43.210000] SMP863x FB: src_surf 0x13409664 src_surf_align 0x1340A000, src_si
    ze 8372800, src_align_size 8370340
    [   43.240000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.240000] SMP863x: CreateGFXOSD Cannot open GFX OSD decoder
    [   43.260000] em863x_gfx: probe of em863x_gfx.0 failed with error -1
    [   43.260000] SMP863x: Registering Sigma DVB Adapter
    [   43.280000] DVB: registering new adapter (SIGMA 863x DVB)
    [   43.280000] SMP863x: Initializing DVB demux 0...
    [   43.300000] SMP863x: Initializing DVB demux device 0...
    [   43.300000] SMP863x: Initializing DVB demux 1...
    [   43.340000] SMP863x: Initializing DVB demux device 1...
    [   43.340000] SMP863x: Initializing DVB demux 2...
    [   43.380000] SMP863x: Initializing DVB demux device 2...
    [   43.400000] SMP863x: Registering misc/pvr char device
    [   43.430000] SMP863x: Registering Sigma DVB Audio Device
    [   43.440000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.440000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.470000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.520000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.520000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.540000] SMP863x: RM_FATALOUTOFMEMORY:/work/novo/dvb/FINAL/sigma_dvb_audio
    .c:395
    [   43.570000] CPU 0 Unable to handle kernel paging request at virtual address 0
    0000008, epc == c0f70e78, ra == c0f70e30
    [   43.590000] Oops[#1]:
    [   43.590000] Cpu 0
    [   43.590000] $ 0   : 00000000 90fa0000 00000000 00100000
    [   43.590000] $ 4   : 00000000 0000001b 0000103f 95fe5d80
    [   43.590000] $ 8   : 00003f00 00000001 00000001 00000001
    [   43.590000] $12   : 00000100 00000000 00000000 00000000
    [   43.590000] $16   : 00000003 95fe5d80 c0f6d474 9574cf90
    [   43.590000] $20   : 95fe5d81 00000001 c0048018 c1050000
    [   43.590000] $24   : 0000002b 90051cb4
    [   43.590000] $28   : 95fe4000 95fe5d68 00000001 c0f70e30
    [   43.590000] Hi    : 00000000
    [   43.590000] Lo    : 00000000
    [   43.590000] epc   : c0f70e78 init_audio_decoder+0x130/0x2a4 [863xdvb]
    [   43.590000]     Tainted: P           O
    [   43.590000] ra    : c0f70e30 init_audio_decoder+0xe8/0x2a4 [863xdvb]
    [   43.590000] Status: 10009c03    KERNEL EXL IE
    [   43.590000] Cause : 10800008
    [   43.590000] BadVA : 00000008
    [   43.590000] PrId  : 00019069 (MIPS 4KEc)
    [   43.590000] Modules linked in: 863xdvb(PO+) sci(O) nimdetect(O) az_zl10353(O)
     az_tda10023(O) az_stv090x(O) az_stv6110x(O) az_mxl5007t(O) az_mxl201rf(O) az_cx
    24116(O) 863xi2c(PO) em8xxx(PO) llad(PO) irvfd(PO) hook(O) [last unloaded: scsi_
    wait_scan]
    [   43.590000] Process modprobe (pid: 283, threadinfo=95fe4000, task=95762d60, t
    ls=7731a6a0)
    [   43.590000] Stack : 905e2c18 c102cfa0 c102b810 c102cfbc 00000001 00000000 000
    00101 00000000
    [   43.590000]         00000000 00000000 00000001 00080000 00000010 00000708 000
    00080 00000000
    [   43.590000]         9574c000 00000000 904e6138 c1030000 9574cf90 ffffffff c00
    48018 c0f7146c
    [   43.590000]         9574c708 c102cfa0 9574c580 9574c000 00000001 904e6138 c10
    30000 c1050000
    [   43.590000]         904e6138 c1030000 c1050000 c1030000 000000ff c0f69a50 948
    70280 c102a708
    [   43.590000]         ...
    [   43.590000] Call Trace:
    [   43.590000] [<c0f70e78>] init_audio_decoder+0x130/0x2a4 [863xdvb]
    [   43.590000] [<c0f7146c>] InitDVBAudio+0x154/0x1c4 [863xdvb]
    [   43.590000] [<c0f69a50>] sigma_dvb_init+0x534/0xbf0 [863xdvb]
    [   43.590000] [<90024164>] do_one_initcall+0x164/0x1d0
    [   43.590000] [<9008c0f4>] sys_init_module+0x6c4/0x1164
    [   43.590000] [<90034dd0>] stack_done+0x20/0x44
    [   43.590000]
    [   43.590000]
    [   43.590000] Code: 8e620028  27b40019  00002021 <8c450008> 24020001  24061084
     02803821  afa20010  0240f809
    [   44.030000] ---[ end trace 9c67f0837dbc8342 ]---
    [   45.590000] ------------[ cut here ]------------
    [   45.590000] WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0xec/0x120()
    [   45.600000] name 'stb/info/vumodel'
    [   45.600000] Modules linked in: boxmodel(PO+) rt61pci rt2x00pci rt2x00lib mac8
    0211 eeprom_93cx6 863xdvb(PO+) sci(O) nimdetect(O) az_zl10353(O) az_tda10023(O)
    az_stv090x(O) az_stv6110x(O) az_mxl5007t(O) az_mxl201rf(O) az_cx24116(O) 863xi2c
    (PO) em8xxx(PO) llad(PO) irvfd(PO) hook(O) [last unloaded: scsi_wait_scan]
    [   45.630000] Call Trace:
    [   45.640000] [<904e5220>] dump_stack+0x8/0x34
    [   45.640000] [<9004a158>] warn_slowpath_common+0x78/0xa4
    [   45.650000] [<9004a1b0>] warn_slowpath_fmt+0x2c/0x38
    [   45.650000] [<9013e47c>] __xlate_proc_name+0xec/0x120
    [   45.660000] [<9013e50c>] __proc_create+0x5c/0x14c
    [   45.660000] [<9013e7fc>] create_proc_entry+0x48/0xb4
    [   45.670000] [<c1355024>] init_vumodel+0x24/0x4c [boxmodel]
    [   45.670000] [<90024164>] do_one_initcall+0x164/0x1d0
    [   45.680000] [<9008c0f4>] sys_init_module+0x6c4/0x1164
    [   45.680000] [<90034dd0>] stack_done+0x20/0x44
    [   45.690000]
    [   45.690000] ---[ end trace 9c67f0837dbc8343 ]---
    [   63.640000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    [   81.520000] svc: failed to register nfsdv2 RPC service (errno 146).
    [   81.530000] nfsd: last server has exited, flushing export cache
    root@azboxhd:~#
    Thanks,
    deckard

    •   Alt Advertising

       

  2. #2
    Anfänger
    Registriert seit
    08.08.2013
    Beiträge
    2
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Zitat Zitat von deckard Beitrag anzeigen
    Hi everyone!

    I've installed OpenAtv4.2 but the enigma2 doesn't load. It's stuck with "VFD READY!"

    Code:
    root@azboxhd:~# dmesg
    2-Part4"
    [    1.860000] 0x000000700000-0x000000800000 : "CS2-Part5"
    [    1.870000] tango2_enet: ethernet driver for SMP863x internal mac
    [    1.880000] tango2_enet: detected phy at address 0x01
    [    1.880000] tango2_enet: mac address 00:02:14:15:c6:53
    [    1.890000] PPP generic driver version 2.4.2
    [    1.890000] PPP BSD Compression module registered
    [    1.900000] PPP Deflate Compression module registered
    [    1.940000] PPP MPPE Compression module registered
    [    1.940000] NET: Registered protocol family 24
    [    1.950000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.950000] ehci_hcd 0000:00:02.2: EHCI Host Controller
    [    1.960000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus numbe
    r 1
    [    1.970000] ehci_hcd 0000:00:02.2: irq 22, io mem 0x62000000
    [    1.990000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [    1.990000] hub 1-0:1.0: USB hub found
    [    2.000000] hub 1-0:1.0: 4 ports detected
    [    2.000000] tangox-ehci-hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    2.010000] TangoX USB initializing...
    [    2.060000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: TangoX USB 2.0
    [    2.060000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: new USB bus registered, assi
    gned bus number 2
    [    2.070000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: irq 48, io mem 0xa0021400
    [    2.100000] tangox-ehci-hcd-0 tangox-ehci-hcd-0: USB 0.0 started, EHCI 1.00
    [    2.100000] hub 2-0:1.0: USB hub found
    [    2.110000] hub 2-0:1.0: 2 ports detected
    [    2.110000] tangox-ohci-hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.120000] TangoX USB was initialized.
    [    2.120000] Initializing TangoX USB OHCI Controller Membase=0xa0021500, irq=4
    7
    [    2.190000] tangox-ohci-hcd tangox-ohci-hcd: USB Host Controller
    [    2.190000] tangox-ohci-hcd tangox-ohci-hcd: new USB bus registered, assigned
     bus number 3
    [    2.200000] tangox-ohci-hcd tangox-ohci-hcd: irq 47, io mem 0xa0021500
    [    2.330000] hub 3-0:1.0: USB hub found
    [    2.330000] hub 3-0:1.0: 2 ports detected
    [    2.340000] usbcore: registered new interface driver cdc_acm
    [    2.350000] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
    N adapters
    [    2.350000] usbcore: registered new interface driver uas
    [    2.360000] Initializing USB Mass Storage driver...
    [    2.370000] usbcore: registered new interface driver usb-storage
    [    2.370000] USB Mass Storage support registered.
    [    2.380000] mousedev: PS/2 mouse device common for all mice
    [    2.380000] lirc_dev: IR Remote Control driver registered, major 253
    [    2.390000] IR NEC protocol handler initialized
    [    2.390000] IR RC5(x) protocol handler initialized
    [    2.400000] IR RC6 protocol handler initialized
    [    2.400000] IR JVC protocol handler initialized
    [    2.410000] IR Sony protocol handler initialized
    [    2.410000] IR RC5 (streamzap) protocol handler initialized
    [    2.420000] IR SANYO protocol handler initialized
    [    2.420000] IR MCE Keyboard/mouse protocol handler initialized
    [    2.430000] IR LIRC bridge handler initialized
    [    2.440000] usbcore: registered new interface driver btusb
    [    2.440000] usbcore: registered new interface driver usbhid
    [    2.450000] usbhid: USB HID core driver
    [    2.450000] ALSA device list:
    [    2.460000]   No soundcards found.
    [    2.460000] TCP cubic registered
    [    2.460000] NET: Registered protocol family 17
    [    2.470000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    2.470000] lib80211: common routines for IEEE802.11 drivers
    [    2.480000] lib80211_crypt: registered algorithm 'NULL'
    [    2.570000] Freeing unused kernel memory: 9528k freed
    [    3.860000] irvfd: module license 'unspecified' taints kernel.
    [    3.870000] Disabling lock debugging due to kernel taint
    [    3.880000] MICOM FP starting ...
    [    3.900000] Forcing RF MOD
    [    3.900000] RF Detected
    [    3.900000] SCART Detected
    [    4.080000] DETECTED AZBOX ELITE MODEL
    [    4.080000] input: dreambox remote control (native) as /devices/virtual/input
    /input0
    [   29.970000] kjournald starting.  Commit interval 5 seconds
    [   30.000000] EXT3-fs (hda1): using internal journal
    [   30.010000] EXT3-fs (hda1): recovery complete
    [   30.010000] EXT3-fs (hda1): mounted filesystem with ordered data mode
    [   30.350000] Algorithmics/MIPS FPU Emulator v1.5
    [   35.540000] Adding 59388k swap on /dev/hda3.  Priority:-1 extents:1 across:59
    388k
    [   36.210000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1703] i
    nit_module: begun
    [   36.250000] em8xxx0 [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_f
    acsprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1554]
    identify: board has unknown subid=0x50
    [   36.270000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1689] i
    dentify: device 0x8634 0x86 accepted with software tango2revA
    [   36.460000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1768] m
    umk_register_tasklet 0xc0d4a000
    [   36.480000] mumk_register_tasklet: (0) tasklet c0d4a000 status @c0cd9754
    [   36.490000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[0] 0xc0d4c000: pE=0xc0cd9530 ch_idx=33 module_id=0x3
    c 0xc0cd9550
    [   36.510000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[1] 0xc0d4e000: pE=0xc0cd9530 ch_idx=35 module_id=0x3
    c 0xc0cd955c
    [   36.540000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[2] 0xc0d50000: pE=0xc0cd9530 ch_idx=41 module_id=0x1
    3c 0xc0cd9568
    [   36.560000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[3] 0xc0d52000: pE=0xc0cd9530 ch_idx=43 module_id=0x1
    3c 0xc0cd9574
    [   36.580000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[4] 0xc0d54000: pE=0xc0cd9530 ch_idx=37 module_id=0x2
    3c 0xc0cd9580
    [   36.610000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[5] 0xc0d56000: pE=0xc0cd9530 ch_idx=39 module_id=0x2
    3c 0xc0cd958c
    [   36.630000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:403] mu
    mk_register_channel_tasklet[6] 0xc0d58000: pE=0xc0cd9530 ch_idx=69 module_id=0x3
    f 0xc0cd9598
    [   36.650000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    849] I found 32 video decoders.
    [   36.670000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    866] I found 4 audio decoders.
    [   36.690000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    883] I found 2 audio capture modules.
    [   36.700000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    900] I found 6 STC.
    [   36.720000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    917] I found 3 demuxs.
    [   36.740000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/em8xxx_proc.c:
    935] I found 96 outputs.
    [   36.760000] em8xxx [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_fa
    csprod_legacy_dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1895] i
    nit_module: done. Found 1 em8xxx
    [   36.960000] dev 8634 rev 86
    [   38.250000] nimdetect: AZBox NIM detection in progress ...
    [   38.250000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
    [   38.270000] Azbox model elite
    [   38.270000] nimdetect: Detecting tuner 0
    [   38.490000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.500000] nimdetect: ReadReg: reg=0xff (error=-1)
    [   38.520000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.520000] nimdetect: ReadReg: reg=0xfe (error=-1)
    [   38.530000] nimdetect: Detecting tuner 1
    [   38.750000] i2c_read_hw: wait for idle failed (concurrent access)
    [   38.760000] nimdetect: ReadReg: reg=0x7f (error=-1)
    [   38.990000] i2c_read_hw: wait for idle failed (concurrent access)
    [   39.000000] nimdetect: ReadReg: reg=0x0 (error=-1)
    [   39.010000] nimdetect: Total detected tuner(s) 0
    [   39.120000] sci0: SMP86xx driver loaded (freq = 3686400, interfaces = 1)
    [   39.120000] sci0: enabled smartcard interface.
    [   39.530000] SMP863x: Loading , build date:  Fri Mar 15 22:51:16 CET 2013
    [   39.550000] SMP863x: Allocating DVBAdapter memory
    [   39.570000] SMP863x: RUA Found pllad at 0
    [   39.570000] SMP863x: Setting OUT MOD
    [   39.590000] SetOutMod: EDID
    [   39.950000] Mode:   74175824, 1920,  540, 2200,  44,  88, 148, 0, 1125,  2,
    5, 15, 0, VideoTiming_1920x1080i@59.94Hz, 1
    [   39.960000] Applying output options - HDMI="HDMI_1080i59"[0:0](YCbCr 709), CA
    V="1080i59"[16:9](YCbCr 709), CVBS="NTSC_M"[16:9](YCbCr 601)
    [   40.210000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   40.210000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:487] ERROR(RM_FATALOU
    TOFMEMORY): Can not configure video timing
    [   40.230000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:1645] ERROR(RM_FATALO
    UTOFMEMORY): Can not apply the video timing configuration to the SMP8xxx
    [   40.250000] [/work/novo/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_dev
    .mips.dts/MRUA_src/kernel/rmoutput/src/rmoutput_outports.c:1880] ERROR(RM_FATALO
    UTOFMEMORY): Can not apply display configuration to the SMP8xxx
    [   42.510000] SMP863x: Registering RFMOD char device
    [   42.630000] SMP863x: Registering frameyuv char device
    [   42.650000] SMP863x: Init DCC
    [   42.650000] SMP863x: Init Microcode DCC
    [   43.200000] SMP863x: Init GFX
    [   43.210000] SMP863x FB: src_surf 0x13409664 src_surf_align 0x1340A000, src_si
    ze 8372800, src_align_size 8370340
    [   43.240000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.240000] SMP863x: CreateGFXOSD Cannot open GFX OSD decoder
    [   43.260000] em863x_gfx: probe of em863x_gfx.0 failed with error -1
    [   43.260000] SMP863x: Registering Sigma DVB Adapter
    [   43.280000] DVB: registering new adapter (SIGMA 863x DVB)
    [   43.280000] SMP863x: Initializing DVB demux 0...
    [   43.300000] SMP863x: Initializing DVB demux device 0...
    [   43.300000] SMP863x: Initializing DVB demux 1...
    [   43.340000] SMP863x: Initializing DVB demux device 1...
    [   43.340000] SMP863x: Initializing DVB demux 2...
    [   43.380000] SMP863x: Initializing DVB demux device 2...
    [   43.400000] SMP863x: Registering misc/pvr char device
    [   43.430000] SMP863x: Registering Sigma DVB Audio Device
    [   43.440000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.440000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.470000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.520000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.520000] SMP863x: RUA Failed in RUAmalloc RM_ERROR
    [   43.540000] SMP863x: RM_FATALOUTOFMEMORY:/work/novo/dvb/FINAL/sigma_dvb_audio
    .c:395
    [   43.570000] CPU 0 Unable to handle kernel paging request at virtual address 0
    0000008, epc == c0f70e78, ra == c0f70e30
    [   43.590000] Oops[#1]:
    [   43.590000] Cpu 0
    [   43.590000] $ 0   : 00000000 90fa0000 00000000 00100000
    [   43.590000] $ 4   : 00000000 0000001b 0000103f 95fe5d80
    [   43.590000] $ 8   : 00003f00 00000001 00000001 00000001
    [   43.590000] $12   : 00000100 00000000 00000000 00000000
    [   43.590000] $16   : 00000003 95fe5d80 c0f6d474 9574cf90
    [   43.590000] $20   : 95fe5d81 00000001 c0048018 c1050000
    [   43.590000] $24   : 0000002b 90051cb4
    [   43.590000] $28   : 95fe4000 95fe5d68 00000001 c0f70e30
    [   43.590000] Hi    : 00000000
    [   43.590000] Lo    : 00000000
    [   43.590000] epc   : c0f70e78 init_audio_decoder+0x130/0x2a4 [863xdvb]
    [   43.590000]     Tainted: P           O
    [   43.590000] ra    : c0f70e30 init_audio_decoder+0xe8/0x2a4 [863xdvb]
    [   43.590000] Status: 10009c03    KERNEL EXL IE
    [   43.590000] Cause : 10800008
    [   43.590000] BadVA : 00000008
    [   43.590000] PrId  : 00019069 (MIPS 4KEc)
    [   43.590000] Modules linked in: 863xdvb(PO+) sci(O) nimdetect(O) az_zl10353(O)
     az_tda10023(O) az_stv090x(O) az_stv6110x(O) az_mxl5007t(O) az_mxl201rf(O) az_cx
    24116(O) 863xi2c(PO) em8xxx(PO) llad(PO) irvfd(PO) hook(O) [last unloaded: scsi_
    wait_scan]
    [   43.590000] Process modprobe (pid: 283, threadinfo=95fe4000, task=95762d60, t
    ls=7731a6a0)
    [   43.590000] Stack : 905e2c18 c102cfa0 c102b810 c102cfbc 00000001 00000000 000
    00101 00000000
    [   43.590000]         00000000 00000000 00000001 00080000 00000010 00000708 000
    00080 00000000
    [   43.590000]         9574c000 00000000 904e6138 c1030000 9574cf90 ffffffff c00
    48018 c0f7146c
    [   43.590000]         9574c708 c102cfa0 9574c580 9574c000 00000001 904e6138 c10
    30000 c1050000
    [   43.590000]         904e6138 c1030000 c1050000 c1030000 000000ff c0f69a50 948
    70280 c102a708
    [   43.590000]         ...
    [   43.590000] Call Trace:
    [   43.590000] [<c0f70e78>] init_audio_decoder+0x130/0x2a4 [863xdvb]
    [   43.590000] [<c0f7146c>] InitDVBAudio+0x154/0x1c4 [863xdvb]
    [   43.590000] [<c0f69a50>] sigma_dvb_init+0x534/0xbf0 [863xdvb]
    [   43.590000] [<90024164>] do_one_initcall+0x164/0x1d0
    [   43.590000] [<9008c0f4>] sys_init_module+0x6c4/0x1164
    [   43.590000] [<90034dd0>] stack_done+0x20/0x44
    [   43.590000]
    [   43.590000]
    [   43.590000] Code: 8e620028  27b40019  00002021 <8c450008> 24020001  24061084
     02803821  afa20010  0240f809
    [   44.030000] ---[ end trace 9c67f0837dbc8342 ]---
    [   45.590000] ------------[ cut here ]------------
    [   45.590000] WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0xec/0x120()
    [   45.600000] name 'stb/info/vumodel'
    [   45.600000] Modules linked in: boxmodel(PO+) rt61pci rt2x00pci rt2x00lib mac8
    0211 eeprom_93cx6 863xdvb(PO+) sci(O) nimdetect(O) az_zl10353(O) az_tda10023(O)
    az_stv090x(O) az_stv6110x(O) az_mxl5007t(O) az_mxl201rf(O) az_cx24116(O) 863xi2c
    (PO) em8xxx(PO) llad(PO) irvfd(PO) hook(O) [last unloaded: scsi_wait_scan]
    [   45.630000] Call Trace:
    [   45.640000] [<904e5220>] dump_stack+0x8/0x34
    [   45.640000] [<9004a158>] warn_slowpath_common+0x78/0xa4
    [   45.650000] [<9004a1b0>] warn_slowpath_fmt+0x2c/0x38
    [   45.650000] [<9013e47c>] __xlate_proc_name+0xec/0x120
    [   45.660000] [<9013e50c>] __proc_create+0x5c/0x14c
    [   45.660000] [<9013e7fc>] create_proc_entry+0x48/0xb4
    [   45.670000] [<c1355024>] init_vumodel+0x24/0x4c [boxmodel]
    [   45.670000] [<90024164>] do_one_initcall+0x164/0x1d0
    [   45.680000] [<9008c0f4>] sys_init_module+0x6c4/0x1164
    [   45.680000] [<90034dd0>] stack_done+0x20/0x44
    [   45.690000]
    [   45.690000] ---[ end trace 9c67f0837dbc8343 ]---
    [   63.640000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
    [   81.520000] svc: failed to register nfsdv2 RPC service (errno 146).
    [   81.530000] nfsd: last server has exited, flushing export cache
    root@azboxhd:~#
    Thanks,
    deckard
    It seems to be a problem with last images for the elite hd. Besides that the space left on device is zero.

  3. #3
    Anfänger
    Registriert seit
    19.10.2014
    Beiträge
    2
    Total Downloaded
    39,69 MB
    Total Downloaded
    39,69 MB
    ReceiverDankeAktivitäten
    test the following settings:
    ext2 install at DOM, Copy Kernel and Format Extended Partition

    It works on my Box.

  4. #4
    Anfänger
    Registriert seit
    03.03.2015
    Beiträge
    1
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Hello,

    Sorry to disturb, but I have a problem with my AZBox,

    the tuner is not activated, but the reason why I am still not clear.


    But maybe it has to do with,
    [ 18.450000] em8xxx0 [/work/novo/dvb/3.9.2/mrua_SMP8634_20110531T181327_GCC4_facsprod_legacy_ dev.mips.dts/MRUA_src/rua/emhwlib_kernel/kernel_src/krua.c:1554] identify: board has unknown subid=0x50


    Or this,
    [ 19.330000] nimdetect: AZBox NIM detection in progress ...
    [ 19.350000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
    [ 19.350000] Azbox model premium


    Also the module on the right side is not clear to me, but it seems to me a sort of Cf card.
    It looks at this card on this site,

    Code:
    http://nl.aliexpress.com/store/product/kingwolf-OEM-PATA-44-40PIN-DOM-use-KTC-FC1204-control-64MB-64GB-slc-mlc-FLASH-OGB/510623_536843721.html
    Any idea what is wrong with my box ? And how I could fix it ?

    Thank you in advance for your help and tips !

    TS


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 10:57 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com