Ergebnis 21 bis 23 von 23
-
16.04.2020, 15:58 #21giopetGast
-
Danke - 2 Thanks
-
Advertising
-
20.04.2020, 21:06 #22
- Registriert seit
- 13.04.2020
- Ort
- Erlangen
- Beiträge
- 8
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 0
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:AXAS HIS TwinHallo liebe Experten, ich bin total neu hier und unerfahren, was SAT-Receiver angeht. Ich habe seit ein paar Tagen eine AXAS HIS TWIN mit openATV 6.2. Mein Receiver lässt sich aus dem Standby über die Fernbedienung nicht hochfahren. Ich muss immer den Stromstöpsel rausziehen, dann bootet der Receiver. Aber das kann ja nicht die Dauerlösung sein !
Jetzt hat mir einer empfohlen auf die neueste Software upzugraden. Das ist wohl OpenATV 6.4. Aber wie geht das ? Gibt es irgendwo eine Schritt-für-Schritt-Anleitung ?
-
28.07.2020, 19:47 #23
- Registriert seit
- 14.07.2020
- Ort
- Russland. Orjol.
- Beiträge
- 10
- Thanks (gegeben)
- 3
- Thanks (bekommen)
- 7
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:vu+ zero 4kBox 2:axas his twinBox 3:axas his twin plusBox 4:zgemma h9sDownload the OpenATV 6.4 image, unzip it into a folder. Get the axas folder, open this folder, then the axashistwin folder follows, open the folder in it 4 files: imageversion, noforce, rootfs.bin, uImage. Rename the noforce file to force. Format usb flash drive in fat32. Place the axas folder in the usb root. Insert usb into the receiver disconnected from the mains. Connect the receiver and press the green button on the remote control. The software update process should go on the TV screen. After successful completion, turn off the receiver, take out the usb and proceed to adjust the image!
Geändert von xvily (03.09.2021 um 13:40 Uhr)
Lesezeichen