Thanks Thanks:  14
Seite 5 von 9 ErsteErste ... 34567 ... LetzteLetzte
Ergebnis 41 bis 50 von 90
  1. #41
    Avatar von SpaceRat
    Registriert seit
    13.08.2013
    Ort
    Midgard
    Beiträge
    2.725
    Total Downloaded
    745,74 MB
    Total Downloaded
    745,74 MB
    ReceiverDankeAktivitäten
    Box 1:
    Vu+ Duo² 4x DVB-S2 OpenATV 6.1
     
     
    Box 2:
    AX QuadBox 2xDVB-S2 OpenATV 6.1
     
     
    Box 3:
    2x Vu+ Solo² OpenATV 6.1
     
     
    Box 4:
    Topfield TF7700 HDPVR HDMU
     
     
    Box 5:
    DVBViewer
     
     
    Ja, ist immer noch da:

    Code:
    [    0.270000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    [    0.270000] brcmstb_nand: NAND controller driver is loaded
    [    0.270000] libphy: Fixed MDIO Bus: probed
    [    0.270000] __clk_enable: network [1]
    [    0.270000] bcm7425_pm_network_enable 00
    [    0.270000] __clk_enable: enet [1]
    [    0.270000] bcm40nm_pm_genet_enable 00
    [    0.543000] Found PHY at Address 5
    [    0.543000] bcmgenet: configuring instance #0 for external RGMII
    [    0.543000] __clk_disable: enet [0]
    [    0.543000] bcm40nm_pm_genet_disable 00
    [    0.543000] __clk_disable: network [0]
    [    0.543000] bcm7425_pm_network_disable 00
    [    0.543000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.543000] __clk_enable: usb [1]
    [    0.543000] bcm40nm_pm_usb_enable 00
    [    0.543000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [    0.543000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [    0.553000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [    0.559000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [    0.559000] hub 1-0:1.0: USB hub found
    [    0.559000] hub 1-0:1.0: 1 port detected
    [    0.559000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    [    0.559000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    [    0.570000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    [    0.576000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    [    0.576000] ata1: SATA link down (SStatus 0 SControl 300)
    [    0.576000] hub 2-0:1.0: USB hub found
    [    0.576000] hub 2-0:1.0: 1 port detected
    [    0.577000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    [    0.577000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    [    0.587000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    [    0.593000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    [    0.593000] hub 3-0:1.0: USB hub found
    [    0.593000] hub 3-0:1.0: 1 port detected
    [    0.593000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    [    0.593000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    [    0.604000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    [    0.610000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    [    0.610000] hub 4-0:1.0: USB hub found
    [    0.610000] hub 4-0:1.0: 1 port detected
    [    0.610000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.611000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [    0.611000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    [    0.611000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    [    0.676000] hub 5-0:1.0: USB hub found
    [    0.676000] hub 5-0:1.0: 1 port detected
    [    0.677000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    [    0.677000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    [    0.677000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    [    0.742000] hub 6-0:1.0: USB hub found
    [    0.742000] hub 6-0:1.0: 1 port detected
    [    0.742000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    [    0.743000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    [    0.743000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    [    0.808000] hub 7-0:1.0: USB hub found
    [    0.808000] hub 7-0:1.0: 1 port detected
    [    0.809000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    [    0.809000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    [    0.809000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    [    0.874000] hub 8-0:1.0: USB hub found
    [    0.874000] hub 8-0:1.0: 1 port detected
    [    0.875000] usbcore: registered new interface driver usb-storage
    [    0.875000] mousedev: PS/2 mouse device common for all mice
    [    0.875000] i2c /dev entries driver
    [    0.875000] usbcore: registered new interface driver btusb
    [    0.875000] sdhci: Secure Digital Host Controller Interface driver
    [    0.875000] sdhci: Copyright(c) Pierre Ossman
    [    0.875000] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.875000] sdhci-brcmstb sdhci-brcmstb.0: Disabled by bootloader
    [    0.875000] sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
    [    0.875000] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.876000] usbcore: registered new interface driver usbhid
    [    0.876000] usbhid: USB HID core driver
    [    0.876000] NET: Registered protocol family 17
    [    0.876000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.876000] Bluetooth: HIDP socket layer initialized
    [    0.876000] Key type dns_resolver registered
    [    0.876000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [    0.882000] EBI CS1: setting up NAND flash (primary)
    [    0.882000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
    [    0.882000] nand: Samsung NAND 1GiB 3,3V 8-bit
    [    0.882000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    [    0.882000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [    0.882000]
    [    0.883000] Bad block table found at page 524224, version 0x01
    [    0.883000] Bad block table found at page 524160, version 0x01
    [    0.884000] Creating 3 MTD partitions on "brcmnand.0":
    [    0.884000] 0x000000000000-0x000040000000 : "complete"
    [    0.890000] 0x000000000000-0x000000600000 : "kernel"
    [    0.891000] 0x000000600000-0x000040000000 : "rootfs"
    [    0.897000] EBI CS0: setting up SPI flash
    [    0.897000] brcm_setup_spi_flash: can't locate SPI master
    [    0.897000] brcm_setup_cs: can't register SPI flash (error -19)
    [    0.898000] ubi0: default fastmap pool size: 256
    [    0.898000] ubi0: default fastmap WL pool size: 128
    [    0.898000] ubi0: attaching mtd2
    [    1.165000] usb 7-1: new full-speed USB device number 2 using ohci-brcm
    [    1.214000] usb 2-1: new high-speed USB device number 2 using ehci-brcm
    [    1.233000] ubi0: attached by fastmap
    [    1.233000] ubi0: fastmap pool size: 256
    [    1.233000] ubi0: fastmap WL pool size: 128
    [    1.249000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
    [    1.249000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [    1.249000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [    1.249000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    [    1.249000] ubi0: good PEBs: 8140, bad PEBs: 4, corrupted PEBs: 0
    [    1.249000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    [    1.249000] ubi0: max/mean erase counter: 3/0, WL threshold: 4096, image sequence number: 912108571
    [    1.249000] ubi0: available PEBs: 0, total reserved PEBs: 8140, PEBs reserved for bad PEB handling: 156
    [    1.249000] ubi0: background thread "ubi_bgt0d" started, PID 81
    [    1.249000] ALSA device list:
    [    1.249000]   No soundcards found.
    [    1.249000] Warning: unable to open an initial console.
    [    1.329000] usb-storage 2-1:1.0: USB Mass Storage device detected
    [    1.330000] scsi host2: usb-storage 2-1:1.0
    [    1.602000] random: nonblocking pool is initialized
    [    2.332000] scsi 2:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
    [    2.333000] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [    2.334000] sd 2:0:0:0: [sda] 60751872 512-byte logical blocks: (31.1 GB/29.0 GiB)
    [    2.335000] sd 2:0:0:0: [sda] Write Protect is off
    [    2.335000] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00
    [    2.336000] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [    2.370000]  sda: sda1
    [    2.374000] sd 2:0:0:0: [sda] Attached SCSI removable disk
    [    5.930000] ata2: link is slow to respond, please be patient (ready=0)
    [   10.622000] ata2: COMRESET failed (errno=-16)
    [   15.974000] ata2: link is slow to respond, please be patient (ready=0)
    [   20.666000] ata2: COMRESET failed (errno=-16)
    [   26.018000] ata2: link is slow to respond, please be patient (ready=0)
    [   55.700000] ata2: COMRESET failed (errno=-16)
    [   55.700000] ata2: limiting SATA link speed to 3.0 Gbps
    [   56.003000] ata2: SATA link down (SStatus 0 SControl 320)
    [   56.004000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
    [   56.004000] ata2: irq_stat 0x00000040, connection status changed
    [   56.004000] ata2: SError: { DevExch }
    [   56.004000] ata2: hard resetting link
    [   56.004000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 91
    [   56.103000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [   56.103000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [   56.103000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [   56.103000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
    [   56.103000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID E28F9DE7-6FFF-4F9B-BB3E-3E5B38E80C16, small LPT model
    [   56.105000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [   56.106000] devtmpfs: mounted
    [   56.106000] Freeing unused kernel memory: 240K (80954000 - 80990000)
    [   56.106000] This architecture does not have kernel memory protection.
    [   56.727000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [   56.727000] ata2.00: ATA-9: WDC WD10JPVX-22JC3T0, 01.01A01, max UDMA/133
    [   56.727000] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [   56.728000] ata2.00: configured for UDMA/133
    [   56.728000] ata2: EH complete
    [   56.728000] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10JPVX-22J 1A01 PQ: 0 ANSI: 5
    [   56.741000] sd 1:0:0:0: Attached scsi generic sg1 type 0
    [   56.742000] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    [   56.742000] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [   56.742000] sd 1:0:0:0: [sdb] Write Protect is off
    [   56.742000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [   56.742000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [   59.111000]  sdb: sdb1
    [   59.112000] sd 1:0:0:0: [sdb] Attached SCSI disk
    [   59.378000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   60.307000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [   60.496000] usbcore: registered new interface driver tpm
    [   63.731000] hd2400: module_layout: kernel tainted.
    [   63.731000] Disabling lock debugging due to kernel taint
    [   66.323000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [   66.324000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [   66.400000] DVB: registering new adapter (dvb0)
    [   66.401000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
    [   66.402000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-S2)...
    [   66.402000] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-T/T2/C)...
    [   66.402000] platform dvb0.0: DVB: registering adapter 0 frontend 3 (DVB-T/T2/C)...
    [   66.784000] input: front panel as /devices/virtual/input/input2
    [   67.764000] SGI XFS with security attributes, realtime, no debug enabled
    [   67.822000] boxmodel: module license 'proprietary' taints kernel.
    [   72.273000] __clk_enable: network [1]
    [   72.273000] bcm7425_pm_network_enable 00
    [   72.273000] __clk_enable: enet [1]
    [   72.273000] bcm40nm_pm_genet_enable 00
    [   72.364000] bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    [   75.579000] NET: Registered protocol family 10
    [   81.362000] Unable to determine destination address.
    [   81.440000] Unable to determine destination address.
    [   81.465000] Unable to determine destination address.
    [   81.490000] Unable to determine destination address.
    [   81.515000] Unable to determine destination address.
    [   81.579000] Unable to determine destination address.
    [   81.640000] Unable to determine destination address.
    [   90.067000] Unable to determine destination address.
    [   90.130000] Unable to determine destination address.
    [   90.150000] Unable to determine destination address.
    [   90.173000] Unable to determine destination address.
    [   90.196000] Unable to determine destination address.
    [   90.261000] Unable to determine destination address.
    [   90.318000] Unable to determine destination address.
    [   98.396000] Unable to determine destination address.
    [   98.477000] Unable to determine destination address.
    [   98.497000] Unable to determine destination address.
    [   98.523000] Unable to determine destination address.
    [   98.543000] Unable to determine destination address.
    [   98.610000] Unable to determine destination address.
    [   98.669000] Unable to determine destination address.
    [  105.236000] Unable to determine destination address.
    [  105.297000] Unable to determine destination address.
    [  105.319000] Unable to determine destination address.
    [  105.343000] Unable to determine destination address.
    [  105.364000] Unable to determine destination address.
    [  105.428000] Unable to determine destination address.
    [  105.487000] Unable to determine destination address.

    Aber nur bevor Ihr das auf meine Festplatte schiebt: Ich bin ja bei weitem nicht der Einzige, der den neuen DM800-Modus bemängelt ...
    http://www.opena.tv/ax-quadbox-hd240...x-quadbox.html
    Receiver/TV:
    • Vu+ Duo² 4xDVB-S2 / 2x-C / 1.8TB / OpenATV 6.1@Samsung 50" Plasma
    • AX QuadBox HD2400 2xDVB-S2 / 2x-C / 930 GB / OpenATV 6.1@Samsung 32" TFT
    • 2x Vu+ Solo² / OpenATV 6.1
    • S2-Twin-Tuner PCIe@Samsung SyncMaster T240HD (PC)
    • TechniSat SkyStar HD 2 (2.PC)
    Pay-TV: Schwarzfunk, Redlight HD Mega, XXL, HD-, Sky
    Internet: Unitymedia 1play 100 / Cisco EPC3212 + Linksys WRT1900ACS / IPv4 (UM) + IPv6 (HE)

    •   Alt Advertising

       

  2. #42
    Avatar von arn354
    Registriert seit
    06.04.2013
    Beiträge
    2.947
    Total Downloaded
    147,3 KB
    Total Downloaded
    147,3 KB
    ReceiverDankeAktivitäten
    Nein - nicht falsch verstehen
    wäre aber interessant ob es eben speziell um die sata/hdd erkennung geht. Klemm die mal bitte ab ob die Box dann normal schnell bootet. Dann müsste man mal die defconfig's diesbezüglich vergleichen oder auch nachsehen ob es in dem Bereich evtl kernel-patche gab/gibt.

    Aber Netzwerk sieht auch noch nicht so ideal aus
    Grüßle


  3. #43
    Avatar von SpaceRat
    Registriert seit
    13.08.2013
    Ort
    Midgard
    Beiträge
    2.725
    Total Downloaded
    745,74 MB
    Total Downloaded
    745,74 MB
    ReceiverDankeAktivitäten
    Box 1:
    Vu+ Duo² 4x DVB-S2 OpenATV 6.1
     
     
    Box 2:
    AX QuadBox 2xDVB-S2 OpenATV 6.1
     
     
    Box 3:
    2x Vu+ Solo² OpenATV 6.1
     
     
    Box 4:
    Topfield TF7700 HDPVR HDMU
     
     
    Box 5:
    DVBViewer
     
     
    3x revert, dann isses top

    PS: Aufschrauben habe ich jetzt nicht so recht Lust zu, ich bin froh, daß das Gehäuse grad nicht dröhnt.
    Die Idee, die Festplatte direkt auf eine abgesägte Platine zu schrauben senkt zwar die Herstellungskosten, geht aber stark auf Kosten der Geräuschdämmung.


    PS:
    Aufschrauben ist echt suboptimal:
    Kernel/Treiber-Update ab Image 28.9.-2016-10-13-16.03.24.jpg
    Geändert von SpaceRat (14.10.2016 um 04:22 Uhr)
    Receiver/TV:
    • Vu+ Duo² 4xDVB-S2 / 2x-C / 1.8TB / OpenATV 6.1@Samsung 50" Plasma
    • AX QuadBox HD2400 2xDVB-S2 / 2x-C / 930 GB / OpenATV 6.1@Samsung 32" TFT
    • 2x Vu+ Solo² / OpenATV 6.1
    • S2-Twin-Tuner PCIe@Samsung SyncMaster T240HD (PC)
    • TechniSat SkyStar HD 2 (2.PC)
    Pay-TV: Schwarzfunk, Redlight HD Mega, XXL, HD-, Sky
    Internet: Unitymedia 1play 100 / Cisco EPC3212 + Linksys WRT1900ACS / IPv4 (UM) + IPv6 (HE)

  4. #44
    Avatar von SpaceRat
    Registriert seit
    13.08.2013
    Ort
    Midgard
    Beiträge
    2.725
    Total Downloaded
    745,74 MB
    Total Downloaded
    745,74 MB
    ReceiverDankeAktivitäten
    Box 1:
    Vu+ Duo² 4x DVB-S2 OpenATV 6.1
     
     
    Box 2:
    AX QuadBox 2xDVB-S2 OpenATV 6.1
     
     
    Box 3:
    2x Vu+ Solo² OpenATV 6.1
     
     
    Box 4:
    Topfield TF7700 HDPVR HDMU
     
     
    Box 5:
    DVBViewer
     
     
    Zitat Zitat von Captain
    im kernel sind beide nics möglich
    CONFIG_BCMGENET_OG oder CONFIG_BCMGENET
    aktuell ist der alte bcm Treiber aktive also der OG der auch WOL kann
    den neue nutzen wir z.b. auch bei den 7362 da funktioniert der Treiber gut warum der 7424 da so ne zicke ist müssen sie halt noch finden
    Ja, aber das können sie doch auch machen, wenn der Kernel nur in next/nextp3 ist ...

    Außerdem wäre auf WOL ja noch geschissen, aber mehr als 2 Minuten Bootzeit, da kann ich ja die Quadbox in die Ecke schmeißen und meinen Topfield wieder hinstellen.
    Siehe auch hier: http://www.opena.tv/ax-quadbox-hd240...x-quadbox.html

    Und Fast Ethernet statt Gigabit kann ich auch mit dem Topfield haben.
    Du siehst ja auch, wie toll die Reaktion ist, wenn hier geschrieben wird

    Wir können den Kernel doch nicht beim Kunden reifen lassen!

    Vielleicht braucht der Fix ja auch genauso lange wie die neuen DVB-C-Tuner, dann haben wir den Kernel jahrelang drin.
    Receiver/TV:
    • Vu+ Duo² 4xDVB-S2 / 2x-C / 1.8TB / OpenATV 6.1@Samsung 50" Plasma
    • AX QuadBox HD2400 2xDVB-S2 / 2x-C / 930 GB / OpenATV 6.1@Samsung 32" TFT
    • 2x Vu+ Solo² / OpenATV 6.1
    • S2-Twin-Tuner PCIe@Samsung SyncMaster T240HD (PC)
    • TechniSat SkyStar HD 2 (2.PC)
    Pay-TV: Schwarzfunk, Redlight HD Mega, XXL, HD-, Sky
    Internet: Unitymedia 1play 100 / Cisco EPC3212 + Linksys WRT1900ACS / IPv4 (UM) + IPv6 (HE)

  5. Thanks kalle1984 bedankten sich
  6. #45
    Senior Mitglied Avatar von kalle1984
    Registriert seit
    10.02.2014
    Beiträge
    585
    Total Downloaded
    313,15 MB
    Total Downloaded
    313,15 MB
    ReceiverDankeAktivitäten
    Box 1:
    AX Quadbox HD 2400
     
     
    Box 2:
    Mut@nt HD51 4K
     
     
    Box 3:
    Mut@nt HD51 4K
     
     
    Box 4:
    CT ET9000 / Xtrend 9200 in Betreuung
     
     
    Box 5:
    VU+ Solo2 und Duo2 in Betreuung
     
     
    Hoffe auch, das da schnellsten was passiert. Mittlerweile ist mein Kaffeevollautomat morgens schneller mit dem Kaffee fertig, als die Box mit booten. 😛

    Gesendet von meinem SM-G935F mit Tapatalk

  7. #46
    Avatar von SpaceRat
    Registriert seit
    13.08.2013
    Ort
    Midgard
    Beiträge
    2.725
    Total Downloaded
    745,74 MB
    Total Downloaded
    745,74 MB
    ReceiverDankeAktivitäten
    Box 1:
    Vu+ Duo² 4x DVB-S2 OpenATV 6.1
     
     
    Box 2:
    AX QuadBox 2xDVB-S2 OpenATV 6.1
     
     
    Box 3:
    2x Vu+ Solo² OpenATV 6.1
     
     
    Box 4:
    Topfield TF7700 HDPVR HDMU
     
     
    Box 5:
    DVBViewer
     
     
    Das nächste Image sollte wieder den letzten guten Kernel drin haben, denn heute habe ich dann reverted, nachdem man hier ja nicht einmal eine Antwort kriegt.

    Einziges Problem: Der Captain sieht die Sache etwas anders.

    Gesendet von meinem S6 mit Tapatalk
    Receiver/TV:
    • Vu+ Duo² 4xDVB-S2 / 2x-C / 1.8TB / OpenATV 6.1@Samsung 50" Plasma
    • AX QuadBox HD2400 2xDVB-S2 / 2x-C / 930 GB / OpenATV 6.1@Samsung 32" TFT
    • 2x Vu+ Solo² / OpenATV 6.1
    • S2-Twin-Tuner PCIe@Samsung SyncMaster T240HD (PC)
    • TechniSat SkyStar HD 2 (2.PC)
    Pay-TV: Schwarzfunk, Redlight HD Mega, XXL, HD-, Sky
    Internet: Unitymedia 1play 100 / Cisco EPC3212 + Linksys WRT1900ACS / IPv4 (UM) + IPv6 (HE)

  8. #47
    Avatar von SpaceRat
    Registriert seit
    13.08.2013
    Ort
    Midgard
    Beiträge
    2.725
    Total Downloaded
    745,74 MB
    Total Downloaded
    745,74 MB
    ReceiverDankeAktivitäten
    Box 1:
    Vu+ Duo² 4x DVB-S2 OpenATV 6.1
     
     
    Box 2:
    AX QuadBox 2xDVB-S2 OpenATV 6.1
     
     
    Box 3:
    2x Vu+ Solo² OpenATV 6.1
     
     
    Box 4:
    Topfield TF7700 HDPVR HDMU
     
     
    Box 5:
    DVBViewer
     
     
    Ansonsten habe ich auch noch das Image vom 22.9. hier.
    Ich kann Dir notfalls erklären, wie man das flashed und den Kernel auf Hold setzt, damit man updaten kann, ohne den Schrottkernel zu kriegen.

    Gesendet von meinem S6 mit Tapatalk
    Receiver/TV:
    • Vu+ Duo² 4xDVB-S2 / 2x-C / 1.8TB / OpenATV 6.1@Samsung 50" Plasma
    • AX QuadBox HD2400 2xDVB-S2 / 2x-C / 930 GB / OpenATV 6.1@Samsung 32" TFT
    • 2x Vu+ Solo² / OpenATV 6.1
    • S2-Twin-Tuner PCIe@Samsung SyncMaster T240HD (PC)
    • TechniSat SkyStar HD 2 (2.PC)
    Pay-TV: Schwarzfunk, Redlight HD Mega, XXL, HD-, Sky
    Internet: Unitymedia 1play 100 / Cisco EPC3212 + Linksys WRT1900ACS / IPv4 (UM) + IPv6 (HE)

  9. #48
    +Independent Advisor+
    Registriert seit
    17.06.2013
    Beiträge
    1.814
    Total Downloaded
    128,09 MB
    Total Downloaded
    128,09 MB
    ReceiverDankeAktivitäten
    dritten sata disk 1TB

    Code:
    [    0.079000] SCSI subsystem initialized
    [    0.079000] libata version 3.00 loaded.
    [    0.079000] usbcore: registered new interface driver usbfs
    [    0.079000] usbcore: registered new interface driver hub
    [    0.079000] usbcore: registered new device driver usb
    [    0.079000] Linux video capture interface: v2.00
    [    0.079000] Advanced Linux Sound Architecture Driver Initialized.
    [    0.080000] Bluetooth: Core ver 2.21
    [    0.080000] NET: Registered protocol family 31
    [    0.080000] Bluetooth: HCI device and connection manager initialized
    [    0.080000] Bluetooth: HCI socket layer initialized
    [    0.080000] Bluetooth: L2CAP socket layer initialized
    [    0.080000] Bluetooth: SCO socket layer initialized
    [    0.080000] clocksource: Switched to clocksource wktmr
    [    0.092000] FS-Cache: Loaded
    [    0.119000] NET: Registered protocol family 2
    [    0.127000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.127000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.127000] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.127000] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.127000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.135000] NET: Registered protocol family 1
    [    0.139000] RPC: Registered named UNIX socket transport module.
    [    0.139000] RPC: Registered udp transport module.
    [    0.139000] RPC: Registered tcp transport module.
    [    0.139000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.143000] futex hash table entries: 512 (order: 4, 65536 bytes)
    [    0.143000] workingset: timestamp_bits=12 max_order=19 bucket_order=7
    [    0.219000] NFS: Registering the id_resolver key type
    [    0.219000] Key type id_resolver registered
    [    0.219000] Key type id_legacy registered
    [    0.219000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.227000] fuse init (API version 7.25)
    [    0.243000] bounce: pool size: 64 pages
    [    0.243000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.243000] io scheduler noop registered
    [    0.243000] io scheduler cfq registered (default)
    [    0.243000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.244000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
    [    0.251000] loop: module loaded
    [    0.252000] ahci ahci.0: SSS flag set, parallel bus scan disabled
    [    0.262000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.262000] ahci ahci.0: flags: ncq sntf stag clo slum part
    [    0.266000] scsi host0: ahci
    [    0.267000] scsi host1: ahci
    [    0.267000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
    [    0.267000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    [    0.267000] brcmstb_nand: NAND controller driver is loaded
    [    0.268000] libphy: Fixed MDIO Bus: probed
    [    0.268000] __clk_enable: network [1]
    [    0.268000] bcm7425_pm_network_enable 00
    [    0.268000] __clk_enable: enet [1]
    [    0.268000] bcm40nm_pm_genet_enable 00
    [    0.540000] Found PHY at Address 5
    [    0.540000] bcmgenet: configuring instance #0 for external RGMII
    [    0.540000] __clk_disable: enet [0]
    [    0.540000] bcm40nm_pm_genet_disable 00
    [    0.540000] __clk_disable: network [0]
    [    0.540000] bcm7425_pm_network_disable 00
    [    0.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.540000] __clk_enable: usb [1]
    [    0.540000] bcm40nm_pm_usb_enable 00
    [    0.540000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [    0.540000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [    0.550000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [    0.556000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [    0.556000] hub 1-0:1.0: USB hub found
    [    0.556000] hub 1-0:1.0: 1 port detected
    [    0.556000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    [    0.556000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    [    0.567000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    [    0.573000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    [    0.573000] ata1: SATA link down (SStatus 0 SControl 300)
    [    0.573000] hub 2-0:1.0: USB hub found
    [    0.573000] hub 2-0:1.0: 1 port detected
    [    0.574000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    [    0.574000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    [    0.584000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    [    0.590000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    [    0.590000] hub 3-0:1.0: USB hub found
    [    0.590000] hub 3-0:1.0: 1 port detected
    [    0.590000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    [    0.590000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    [    0.601000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    [    0.607000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    [    0.607000] hub 4-0:1.0: USB hub found
    [    0.607000] hub 4-0:1.0: 1 port detected
    [    0.607000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.608000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [    0.608000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    [    0.608000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    [    0.673000] hub 5-0:1.0: USB hub found
    [    0.673000] hub 5-0:1.0: 1 port detected
    [    0.674000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    [    0.674000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    [    0.674000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    [    0.739000] hub 6-0:1.0: USB hub found
    [    0.739000] hub 6-0:1.0: 1 port detected
    [    0.739000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    [    0.740000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    [    0.740000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    [    0.805000] hub 7-0:1.0: USB hub found
    [    0.805000] hub 7-0:1.0: 1 port detected
    [    0.806000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    [    0.806000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    [    0.806000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    [    0.871000] hub 8-0:1.0: USB hub found
    [    0.871000] hub 8-0:1.0: 1 port detected
    [    0.872000] usbcore: registered new interface driver usb-storage
    [    0.872000] mousedev: PS/2 mouse device common for all mice
    [    0.872000] i2c /dev entries driver
    [    0.872000] usbcore: registered new interface driver btusb
    [    0.872000] sdhci: Secure Digital Host Controller Interface driver
    [    0.872000] sdhci: Copyright(c) Pierre Ossman
    [    0.872000] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.0: Disabled by bootloader
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
    [    0.872000] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.872000] usbcore: registered new interface driver usbhid
    [    0.872000] usbhid: USB HID core driver
    [    0.873000] NET: Registered protocol family 17
    [    0.873000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.873000] Bluetooth: HIDP socket layer initialized
    [    0.873000] Key type dns_resolver registered
    [    0.873000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [    0.876000] ata2: SATA link down (SStatus 0 SControl 300)
    [    0.879000] EBI CS1: setting up NAND flash (primary)
    [    0.879000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
    [    0.879000] nand: Samsung NAND 1GiB 3,3V 8-bit
    [    0.879000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    [    0.879000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [    0.879000]
    [    0.880000] Bad block table found at page 524224, version 0x01
    [    0.880000] Bad block table found at page 524160, version 0x01
    [    0.881000] Creating 3 MTD partitions on "brcmnand.0":
    [    0.881000] 0x000000000000-0x000040000000 : "complete"
    [    0.887000] 0x000000000000-0x000000600000 : "kernel"
    [    0.888000] 0x000000600000-0x000040000000 : "rootfs"
    [    0.895000] EBI CS0: setting up SPI flash
    [    0.895000] brcm_setup_spi_flash: can't locate SPI master
    [    0.895000] brcm_setup_cs: can't register SPI flash (error -19)
    [    0.895000] ubi0: default fastmap pool size: 256
    [    0.895000] ubi0: default fastmap WL pool size: 128
    [    0.895000] ubi0: attaching mtd2
    [    1.162000] usb 7-1: new full-speed USB device number 2 using ohci-brcm
    [    1.228000] ubi0: attached by fastmap
    [    1.228000] ubi0: fastmap pool size: 256
    [    1.228000] ubi0: fastmap WL pool size: 128
    [    1.245000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
    [    1.245000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [    1.245000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [    1.245000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    [    1.245000] ubi0: good PEBs: 8140, bad PEBs: 4, corrupted PEBs: 0
    [    1.245000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    [    1.245000] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 875766442
    [    1.245000] ubi0: available PEBs: 0, total reserved PEBs: 8140, PEBs reserved for bad PEB handling: 156
    [    1.245000] ubi0: background thread "ubi_bgt0d" started, PID 79
    [    1.245000] ALSA device list:
    [    1.245000]   No soundcards found.
    [    1.245000] Warning: unable to open an initial console.
    [    1.247000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 80
    [    1.288000] UBIFS (ubi0:0): recovery needed
    [    1.302000] random: nonblocking pool is initialized
    [    1.561000] UBIFS (ubi0:0): recovery completed
    [    1.561000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [    1.561000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [    1.561000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [    1.561000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
    [    1.561000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84D9DD2A-F629-49D8-9CF5-8D432CF0D93B, small LPT model
    [    1.564000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [    1.566000] devtmpfs: mounted
    [    1.566000] Freeing unused kernel memory: 260K (8093f000 - 80980000)
    [    1.566000] This architecture does not have kernel memory protection.
    [    2.115000] usbcore: registered new interface driver tpm
    [    5.348000] hd2400: module_layout: kernel tainted.
    [    5.348000] Disabling lock debugging due to kernel taint
    [    6.918000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [    6.918000] ata2: irq_stat 0x00000040, connection status changed
    [    6.918000] ata2: SError: { CommWake DevExch }
    [    6.918000] ata2: hard resetting link
    [    7.546000] Console: switching to colour frame buffer device 160x45
    [    7.589000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    7.590000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    7.666000] DVB: registering new adapter (dvb0)
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
    [    7.989000] input: front panel as /devices/virtual/input/input2
    [    9.001000] Console: switching to colour dummy device 80x25
    [    9.714000] __clk_enable: network [1]
    [    9.714000] bcm7425_pm_network_enable 00
    [    9.714000] __clk_enable: enet [1]
    [    9.714000] bcm40nm_pm_genet_enable 00
    [    9.805000] bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    [   10.292000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [   10.298000] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133
    [   10.298000] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [   10.304000] ata2.00: configured for UDMA/133
    [   10.304000] ata2: EH complete
    [   10.304000] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5
    [   10.313000] sd 1:0:0:0: Attached scsi generic sg0 type 0
    [   10.313000] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    [   10.313000] sd 1:0:0:0: [sda] 4096-byte physical blocks
    [   10.313000] sd 1:0:0:0: [sda] Write Protect is off
    [   10.313000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [   10.313000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [   10.318000]  sda: sda1
    [   10.320000] sd 1:0:0:0: [sda] Attached SCSI disk
    [   10.608000] EXT4-fs (sda1): recovery complete
    [   10.608000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   14.153000] NET: Registered protocol family 10
    root@hd2400:~#
    Geändert von WTE (17.10.2016 um 01:03 Uhr)
    !Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten!

    HD60: TRANSCODING H265 - KODI - HBBTV - IPTV MINISTA (stalker replaced by ministra)
    TOP5:
    Zgemma H9s plus, Mut@nt HD60, Mut@nt/AX HD51 4K, Axas E4HD, VU+ Ultimo 4K



  10. #49
    +Independent Advisor+
    Registriert seit
    17.06.2013
    Beiträge
    1.814
    Total Downloaded
    128,09 MB
    Total Downloaded
    128,09 MB
    ReceiverDankeAktivitäten
    zweiten sata disk 500GB

    Code:
    [    0.079000] SCSI subsystem initialized
    [    0.079000] libata version 3.00 loaded.
    [    0.079000] usbcore: registered new interface driver usbfs
    [    0.079000] usbcore: registered new interface driver hub
    [    0.079000] usbcore: registered new device driver usb
    [    0.079000] Linux video capture interface: v2.00
    [    0.079000] Advanced Linux Sound Architecture Driver Initialized.
    [    0.080000] Bluetooth: Core ver 2.21
    [    0.080000] NET: Registered protocol family 31
    [    0.080000] Bluetooth: HCI device and connection manager initialized
    [    0.080000] Bluetooth: HCI socket layer initialized
    [    0.080000] Bluetooth: L2CAP socket layer initialized
    [    0.080000] Bluetooth: SCO socket layer initialized
    [    0.080000] clocksource: Switched to clocksource wktmr
    [    0.092000] FS-Cache: Loaded
    [    0.118000] NET: Registered protocol family 2
    [    0.126000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.126000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.126000] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.126000] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.126000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.134000] NET: Registered protocol family 1
    [    0.138000] RPC: Registered named UNIX socket transport module.
    [    0.138000] RPC: Registered udp transport module.
    [    0.138000] RPC: Registered tcp transport module.
    [    0.138000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.142000] futex hash table entries: 512 (order: 4, 65536 bytes)
    [    0.142000] workingset: timestamp_bits=12 max_order=19 bucket_order=7
    [    0.219000] NFS: Registering the id_resolver key type
    [    0.219000] Key type id_resolver registered
    [    0.219000] Key type id_legacy registered
    [    0.219000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.227000] fuse init (API version 7.25)
    [    0.243000] bounce: pool size: 64 pages
    [    0.243000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.243000] io scheduler noop registered
    [    0.243000] io scheduler cfq registered (default)
    [    0.243000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.244000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
    [    0.251000] loop: module loaded
    [    0.252000] ahci ahci.0: SSS flag set, parallel bus scan disabled
    [    0.262000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.262000] ahci ahci.0: flags: ncq sntf stag clo slum part
    [    0.266000] scsi host0: ahci
    [    0.267000] scsi host1: ahci
    [    0.267000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
    [    0.267000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    [    0.267000] brcmstb_nand: NAND controller driver is loaded
    [    0.268000] libphy: Fixed MDIO Bus: probed
    [    0.268000] __clk_enable: network [1]
    [    0.268000] bcm7425_pm_network_enable 00
    [    0.268000] __clk_enable: enet [1]
    [    0.268000] bcm40nm_pm_genet_enable 00
    [    0.540000] Found PHY at Address 5
    [    0.540000] bcmgenet: configuring instance #0 for external RGMII
    [    0.540000] __clk_disable: enet [0]
    [    0.540000] bcm40nm_pm_genet_disable 00
    [    0.540000] __clk_disable: network [0]
    [    0.540000] bcm7425_pm_network_disable 00
    [    0.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.540000] __clk_enable: usb [1]
    [    0.540000] bcm40nm_pm_usb_enable 00
    [    0.540000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [    0.540000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [    0.550000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [    0.556000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [    0.556000] hub 1-0:1.0: USB hub found
    [    0.556000] hub 1-0:1.0: 1 port detected
    [    0.556000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    [    0.556000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    [    0.567000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    [    0.573000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    [    0.573000] ata1: SATA link down (SStatus 0 SControl 300)
    [    0.573000] hub 2-0:1.0: USB hub found
    [    0.573000] hub 2-0:1.0: 1 port detected
    [    0.574000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    [    0.574000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    [    0.584000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    [    0.590000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    [    0.590000] hub 3-0:1.0: USB hub found
    [    0.590000] hub 3-0:1.0: 1 port detected
    [    0.590000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    [    0.590000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    [    0.601000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    [    0.607000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    [    0.607000] hub 4-0:1.0: USB hub found
    [    0.607000] hub 4-0:1.0: 1 port detected
    [    0.607000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.608000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [    0.608000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    [    0.608000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    [    0.673000] hub 5-0:1.0: USB hub found
    [    0.673000] hub 5-0:1.0: 1 port detected
    [    0.674000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    [    0.674000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    [    0.674000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    [    0.739000] hub 6-0:1.0: USB hub found
    [    0.739000] hub 6-0:1.0: 1 port detected
    [    0.740000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    [    0.740000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    [    0.740000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    [    0.805000] hub 7-0:1.0: USB hub found
    [    0.805000] hub 7-0:1.0: 1 port detected
    [    0.806000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    [    0.806000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    [    0.806000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    [    0.871000] hub 8-0:1.0: USB hub found
    [    0.871000] hub 8-0:1.0: 1 port detected
    [    0.872000] usbcore: registered new interface driver usb-storage
    [    0.872000] mousedev: PS/2 mouse device common for all mice
    [    0.872000] i2c /dev entries driver
    [    0.872000] usbcore: registered new interface driver btusb
    [    0.872000] sdhci: Secure Digital Host Controller Interface driver
    [    0.872000] sdhci: Copyright(c) Pierre Ossman
    [    0.872000] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.0: Disabled by bootloader
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
    [    0.872000] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.872000] usbcore: registered new interface driver usbhid
    [    0.872000] usbhid: USB HID core driver
    [    0.873000] NET: Registered protocol family 17
    [    0.873000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.873000] Bluetooth: HIDP socket layer initialized
    [    0.873000] Key type dns_resolver registered
    [    0.873000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [    0.876000] ata2: SATA link down (SStatus 0 SControl 300)
    [    0.878000] EBI CS1: setting up NAND flash (primary)
    [    0.878000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
    [    0.878000] nand: Samsung NAND 1GiB 3,3V 8-bit
    [    0.878000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    [    0.878000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [    0.878000]
    [    0.879000] Bad block table found at page 524224, version 0x01
    [    0.879000] Bad block table found at page 524160, version 0x01
    [    0.880000] Creating 3 MTD partitions on "brcmnand.0":
    [    0.880000] 0x000000000000-0x000040000000 : "complete"
    [    0.886000] 0x000000000000-0x000000600000 : "kernel"
    [    0.887000] 0x000000600000-0x000040000000 : "rootfs"
    [    0.894000] EBI CS0: setting up SPI flash
    [    0.894000] brcm_setup_spi_flash: can't locate SPI master
    [    0.894000] brcm_setup_cs: can't register SPI flash (error -19)
    [    0.894000] ubi0: default fastmap pool size: 256
    [    0.894000] ubi0: default fastmap WL pool size: 128
    [    0.894000] ubi0: attaching mtd2
    [    1.162000] usb 7-1: new full-speed USB device number 2 using ohci-brcm
    [    1.214000] ubi0: attached by fastmap
    [    1.214000] ubi0: fastmap pool size: 256
    [    1.214000] ubi0: fastmap WL pool size: 128
    [    1.230000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
    [    1.230000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [    1.230000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [    1.230000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    [    1.230000] ubi0: good PEBs: 8140, bad PEBs: 4, corrupted PEBs: 0
    [    1.230000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    [    1.230000] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 875766442
    [    1.230000] ubi0: available PEBs: 0, total reserved PEBs: 8140, PEBs reserved for bad PEB handling: 156
    [    1.230000] ubi0: background thread "ubi_bgt0d" started, PID 79
    [    1.230000] ALSA device list:
    [    1.230000]   No soundcards found.
    [    1.230000] Warning: unable to open an initial console.
    [    1.232000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 80
    [    1.274000] UBIFS (ubi0:0): recovery needed
    [    1.300000] random: nonblocking pool is initialized
    [    1.548000] UBIFS (ubi0:0): recovery completed
    [    1.548000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [    1.548000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [    1.548000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [    1.548000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
    [    1.548000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84D9DD2A-F629-49D8-9CF5-8D432CF0D93B, small LPT model
    [    1.551000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [    1.553000] devtmpfs: mounted
    [    1.553000] Freeing unused kernel memory: 260K (8093f000 - 80980000)
    [    1.553000] This architecture does not have kernel memory protection.
    [    2.102000] usbcore: registered new interface driver tpm
    [    5.339000] hd2400: module_layout: kernel tainted.
    [    5.339000] Disabling lock debugging due to kernel taint
    [    7.003000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
    [    7.003000] ata2: irq_stat 0x00000040, connection status changed
    [    7.003000] ata2: SError: { PHYRdyChg CommWake DevExch }
    [    7.003000] ata2: hard resetting link
    [    7.545000] Console: switching to colour frame buffer device 160x45
    [    7.589000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    7.589000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    7.666000] DVB: registering new adapter (dvb0)
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
    [    7.983000] input: front panel as /devices/virtual/input/input2
    [    9.004000] Console: switching to colour dummy device 80x25
    [    9.519000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    9.520000] ata2.00: ATA-8: HGST HTS545050A7E680, GR2OA230, max UDMA/133
    [    9.520000] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    9.521000] ata2.00: configured for UDMA/133
    [    9.521000] ata2: EH complete
    [    9.521000] scsi 1:0:0:0: Direct-Access     ATA      HGST HTS545050A7 A230 PQ: 0 ANSI: 5
    [    9.530000] sd 1:0:0:0: Attached scsi generic sg0 type 0
    [    9.530000] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
    [    9.530000] sd 1:0:0:0: [sda] 4096-byte physical blocks
    [    9.531000] sd 1:0:0:0: [sda] Write Protect is off
    [    9.531000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    9.531000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    9.549000] sd 1:0:0:0: [sda] Attached SCSI disk
    [    9.790000] __clk_enable: network [1]
    [    9.790000] bcm7425_pm_network_enable 00
    [    9.790000] __clk_enable: enet [1]
    [    9.790000] bcm40nm_pm_genet_enable 00
    [    9.881000] bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    [   14.229000] NET: Registered protocol family 10
    root@hd2400:~#
    Geändert von WTE (17.10.2016 um 01:05 Uhr)
    !Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten!

    HD60: TRANSCODING H265 - KODI - HBBTV - IPTV MINISTA (stalker replaced by ministra)
    TOP5:
    Zgemma H9s plus, Mut@nt HD60, Mut@nt/AX HD51 4K, Axas E4HD, VU+ Ultimo 4K



  11. #50
    +Independent Advisor+
    Registriert seit
    17.06.2013
    Beiträge
    1.814
    Total Downloaded
    128,09 MB
    Total Downloaded
    128,09 MB
    ReceiverDankeAktivitäten
    Dritten sata disk 1TB

    Code:
    [    0.079000] SCSI subsystem initialized
    [    0.079000] libata version 3.00 loaded.
    [    0.079000] usbcore: registered new interface driver usbfs
    [    0.079000] usbcore: registered new interface driver hub
    [    0.079000] usbcore: registered new device driver usb
    [    0.079000] Linux video capture interface: v2.00
    [    0.079000] Advanced Linux Sound Architecture Driver Initialized.
    [    0.080000] Bluetooth: Core ver 2.21
    [    0.080000] NET: Registered protocol family 31
    [    0.080000] Bluetooth: HCI device and connection manager initialized
    [    0.080000] Bluetooth: HCI socket layer initialized
    [    0.080000] Bluetooth: L2CAP socket layer initialized
    [    0.080000] Bluetooth: SCO socket layer initialized
    [    0.080000] clocksource: Switched to clocksource wktmr
    [    0.092000] FS-Cache: Loaded
    [    0.119000] NET: Registered protocol family 2
    [    0.127000] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    [    0.127000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [    0.127000] TCP: Hash tables configured (established 8192 bind 8192)
    [    0.127000] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.127000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.135000] NET: Registered protocol family 1
    [    0.139000] RPC: Registered named UNIX socket transport module.
    [    0.139000] RPC: Registered udp transport module.
    [    0.139000] RPC: Registered tcp transport module.
    [    0.139000] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.143000] futex hash table entries: 512 (order: 4, 65536 bytes)
    [    0.143000] workingset: timestamp_bits=12 max_order=19 bucket_order=7
    [    0.219000] NFS: Registering the id_resolver key type
    [    0.219000] Key type id_resolver registered
    [    0.219000] Key type id_legacy registered
    [    0.219000] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.227000] fuse init (API version 7.25)
    [    0.243000] bounce: pool size: 64 pages
    [    0.243000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    [    0.243000] io scheduler noop registered
    [    0.243000] io scheduler cfq registered (default)
    [    0.243000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.244000] serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
    [    0.245000] serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
    [    0.251000] loop: module loaded
    [    0.252000] ahci ahci.0: SSS flag set, parallel bus scan disabled
    [    0.262000] ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.262000] ahci ahci.0: flags: ncq sntf stag clo slum part
    [    0.266000] scsi host0: ahci
    [    0.267000] scsi host1: ahci
    [    0.267000] ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
    [    0.267000] ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
    [    0.267000] brcmstb_nand: NAND controller driver is loaded
    [    0.268000] libphy: Fixed MDIO Bus: probed
    [    0.268000] __clk_enable: network [1]
    [    0.268000] bcm7425_pm_network_enable 00
    [    0.268000] __clk_enable: enet [1]
    [    0.268000] bcm40nm_pm_genet_enable 00
    [    0.540000] Found PHY at Address 5
    [    0.540000] bcmgenet: configuring instance #0 for external RGMII
    [    0.540000] __clk_disable: enet [0]
    [    0.540000] bcm40nm_pm_genet_disable 00
    [    0.540000] __clk_disable: network [0]
    [    0.540000] bcm7425_pm_network_disable 00
    [    0.540000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.540000] __clk_enable: usb [1]
    [    0.540000] bcm40nm_pm_usb_enable 00
    [    0.540000] ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    [    0.540000] ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    [    0.550000] ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
    [    0.556000] ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    [    0.556000] hub 1-0:1.0: USB hub found
    [    0.556000] hub 1-0:1.0: 1 port detected
    [    0.556000] ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    [    0.556000] ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    [    0.567000] ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
    [    0.573000] ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    [    0.573000] ata1: SATA link down (SStatus 0 SControl 300)
    [    0.573000] hub 2-0:1.0: USB hub found
    [    0.573000] hub 2-0:1.0: 1 port detected
    [    0.574000] ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    [    0.574000] ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    [    0.584000] ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
    [    0.590000] ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    [    0.590000] hub 3-0:1.0: USB hub found
    [    0.590000] hub 3-0:1.0: 1 port detected
    [    0.590000] ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    [    0.590000] ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    [    0.601000] ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
    [    0.607000] ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    [    0.607000] hub 4-0:1.0: USB hub found
    [    0.607000] hub 4-0:1.0: 1 port detected
    [    0.607000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.608000] ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    [    0.608000] ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    [    0.608000] ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
    [    0.673000] hub 5-0:1.0: USB hub found
    [    0.673000] hub 5-0:1.0: 1 port detected
    [    0.674000] ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    [    0.674000] ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    [    0.674000] ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
    [    0.739000] hub 6-0:1.0: USB hub found
    [    0.739000] hub 6-0:1.0: 1 port detected
    [    0.739000] ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    [    0.740000] ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    [    0.740000] ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
    [    0.805000] hub 7-0:1.0: USB hub found
    [    0.805000] hub 7-0:1.0: 1 port detected
    [    0.806000] ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    [    0.806000] ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    [    0.806000] ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
    [    0.871000] hub 8-0:1.0: USB hub found
    [    0.871000] hub 8-0:1.0: 1 port detected
    [    0.872000] usbcore: registered new interface driver usb-storage
    [    0.872000] mousedev: PS/2 mouse device common for all mice
    [    0.872000] i2c /dev entries driver
    [    0.872000] usbcore: registered new interface driver btusb
    [    0.872000] sdhci: Secure Digital Host Controller Interface driver
    [    0.872000] sdhci: Copyright(c) Pierre Ossman
    [    0.872000] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.0: Disabled by bootloader
    [    0.872000] sdhci-brcmstb sdhci-brcmstb.1: Disabled by bootloader
    [    0.872000] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.872000] usbcore: registered new interface driver usbhid
    [    0.872000] usbhid: USB HID core driver
    [    0.873000] NET: Registered protocol family 17
    [    0.873000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.873000] Bluetooth: HIDP socket layer initialized
    [    0.873000] Key type dns_resolver registered
    [    0.873000] PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    [    0.876000] ata2: SATA link down (SStatus 0 SControl 300)
    [    0.879000] EBI CS1: setting up NAND flash (primary)
    [    0.879000] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xd3
    [    0.879000] nand: Samsung NAND 1GiB 3,3V 8-bit
    [    0.879000] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
    [    0.879000] brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
    [    0.879000]
    [    0.880000] Bad block table found at page 524224, version 0x01
    [    0.880000] Bad block table found at page 524160, version 0x01
    [    0.881000] Creating 3 MTD partitions on "brcmnand.0":
    [    0.881000] 0x000000000000-0x000040000000 : "complete"
    [    0.887000] 0x000000000000-0x000000600000 : "kernel"
    [    0.888000] 0x000000600000-0x000040000000 : "rootfs"
    [    0.895000] EBI CS0: setting up SPI flash
    [    0.895000] brcm_setup_spi_flash: can't locate SPI master
    [    0.895000] brcm_setup_cs: can't register SPI flash (error -19)
    [    0.895000] ubi0: default fastmap pool size: 256
    [    0.895000] ubi0: default fastmap WL pool size: 128
    [    0.895000] ubi0: attaching mtd2
    [    1.162000] usb 7-1: new full-speed USB device number 2 using ohci-brcm
    [    1.228000] ubi0: attached by fastmap
    [    1.228000] ubi0: fastmap pool size: 256
    [    1.228000] ubi0: fastmap WL pool size: 128
    [    1.245000] ubi0: attached mtd2 (name "rootfs", size 1018 MiB)
    [    1.245000] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    [    1.245000] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    [    1.245000] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
    [    1.245000] ubi0: good PEBs: 8140, bad PEBs: 4, corrupted PEBs: 0
    [    1.245000] ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
    [    1.245000] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 875766442
    [    1.245000] ubi0: available PEBs: 0, total reserved PEBs: 8140, PEBs reserved for bad PEB handling: 156
    [    1.245000] ubi0: background thread "ubi_bgt0d" started, PID 79
    [    1.245000] ALSA device list:
    [    1.245000]   No soundcards found.
    [    1.245000] Warning: unable to open an initial console.
    [    1.247000] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 80
    [    1.288000] UBIFS (ubi0:0): recovery needed
    [    1.302000] random: nonblocking pool is initialized
    [    1.561000] UBIFS (ubi0:0): recovery completed
    [    1.561000] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    [    1.561000] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    [    1.561000] UBIFS (ubi0:0): FS size: 1011617792 bytes (964 MiB, 7967 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    [    1.561000] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
    [    1.561000] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 84D9DD2A-F629-49D8-9CF5-8D432CF0D93B, small LPT model
    [    1.564000] VFS: Mounted root (ubifs filesystem) on device 0:12.
    [    1.566000] devtmpfs: mounted
    [    1.566000] Freeing unused kernel memory: 260K (8093f000 - 80980000)
    [    1.566000] This architecture does not have kernel memory protection.
    [    2.115000] usbcore: registered new interface driver tpm
    [    5.348000] hd2400: module_layout: kernel tainted.
    [    5.348000] Disabling lock debugging due to kernel taint
    [    6.918000] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen
    [    6.918000] ata2: irq_stat 0x00000040, connection status changed
    [    6.918000] ata2: SError: { CommWake DevExch }
    [    6.918000] ata2: hard resetting link
    [    7.546000] Console: switching to colour frame buffer device 160x45
    [    7.589000] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    7.590000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    7.666000] DVB: registering new adapter (dvb0)
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-T/T2/C)...
    [    7.667000] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
    [    7.989000] input: front panel as /devices/virtual/input/input2
    [    9.001000] Console: switching to colour dummy device 80x25
    [    9.714000] __clk_enable: network [1]
    [    9.714000] bcm7425_pm_network_enable 00
    [    9.714000] __clk_enable: enet [1]
    [    9.714000] bcm40nm_pm_genet_enable 00
    [    9.805000] bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
    [   10.292000] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [   10.298000] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30003, max UDMA/133
    [   10.298000] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [   10.304000] ata2.00: configured for UDMA/133
    [   10.304000] ata2: EH complete
    [   10.304000] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0003 PQ: 0 ANSI: 5
    [   10.313000] sd 1:0:0:0: Attached scsi generic sg0 type 0
    [   10.313000] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    [   10.313000] sd 1:0:0:0: [sda] 4096-byte physical blocks
    [   10.313000] sd 1:0:0:0: [sda] Write Protect is off
    [   10.313000] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [   10.313000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [   10.318000]  sda: sda1
    [   10.320000] sd 1:0:0:0: [sda] Attached SCSI disk
    [   10.608000] EXT4-fs (sda1): recovery complete
    [   10.608000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   14.153000] NET: Registered protocol family 10
    root@hd2400:~#
    !Deutsch ist nicht meine mutter sprache, so sprachfehler kann auftreten!

    HD60: TRANSCODING H265 - KODI - HBBTV - IPTV MINISTA (stalker replaced by ministra)
    TOP5:
    Zgemma H9s plus, Mut@nt HD60, Mut@nt/AX HD51 4K, Axas E4HD, VU+ Ultimo 4K




Seite 5 von 9 ErsteErste ... 34567 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 08:55 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 10,53%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com