Ergebnis 1 bis 10 von 184
-
09.07.2016, 18:40 #1
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Multistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980
Im openATV gibt es seit Image 7.7.2016 Treiber fuer TBS Tuner
Aktuell wurde der Tuner TBS 5925 getestet andere Tuner der Firma TBS folgen.
Infos zur Firma TBS:
Technische Infos zum Tuner TBS 5925
Produktmerkmale
Digitale Satellitene-TV-Empfangskarte mit einem Tuner fuerr HDTV und Sat-Radio Empfang
Low-Profile Format
32APSK, 16-APSK, CCM, VCM, ACM
Multi-Input-Stream
USB2.0 Anschluss
HDTV Unterstuetzung (MPEG2 und MPEG4 / H.264) fuer HD Sender
Plug'n Play Installation
Hardware Blindscan Funktion
Manuelle und zeitgesteuerte Aufnahme von Digital-TV /Radio
Teletext
TimeShift-Funktion fuer zeitversetztes Fernsehen
Elektronischer Programmfuehrer (EPG)
DiSEqC 2.0, USALS und Unicable kompatibel
Breitband Internetzugang Ueber Satellit moeglich
IR-Fernbedienung
Laeuft nativ im Windows7® Media Center
Volle Unterstuetzung von 32-Bit und 64-Bit Betriebssystemen
Software Anwendung, mit div. Funktionalitaeten, zum TV-Empfang
Technische Spezifikation
Empfangsfrequenzbereich: 925~2175 MHz
Eingangspegel: -69~23dBm
DVB-S2/DVB-S DIRECTV 8PSK QPSK 16APSK 32APSK Demodulator
8PSK /QPSK/16APSK/32APSK mode
Symbol Raten:
DVB-S QPSK: 200Ksps-45 Msps
DVB-S2 8PSK: 2000Ksps-45 Msps
Code Raten:
DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 QPSK: 1/4,1/3,2/5,1/2,3/5,2/3,3/4,4/5,5/6,8/9,8/10
DVB-S2 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10
16APSK: 2/3,3/4,4/5,5/6,8/9,9/10
32APSK: 3/4,4/5,5/6,8/9,9/10
Beitrag von Dr Dish Magazin zu diesen Tuner:
https://www.youtube.com/embed/TUtdLc...=1975&end=2270
Treiber liegen nun auf dem feed fuer das openATV 5.3 Image,
fuer alle Hersteller die ihr hier im Download findet: openATV Nightly Downloads
Ausnahmen !
alle Ixuss Modelle
alle Dreamboxen
alle Azbox Modelle
Odin M9
alle Spark Sh4 Modelle
Xtrend ET5000, ET6000 und ET9x00 Modelle
WetekPlay
Unibox HDx
Sesam 5000
Miraclebox Twin
D-Cube
bei diesen Modellen ist der Kernel zu alt oder Incompatiebel.
Ab openATV 5.4 wird es auch Multistream und Blindscan Support geben wenn die Hardware das Supportet oder man einen entsprechenden Tuner wie den TBS 5925 verwendet.
Beta Tester sind willkommen bitte angeben welche Box Ihr habt ihr musst fuer den TEST ein TBS 5925 oder baugleichen Tuner haben sonst kann man diese Funktion nicht Testen !
openATV we are open Source
Boykott GPL violator
-
Danke - 19 Thanks
-
Advertising
-
13.07.2016, 22:00 #2
- Registriert seit
- 10.06.2014
- Beiträge
- 57
- Thanks (gegeben)
- 19
- Thanks (bekommen)
- 10
- Total Downloaded
- 2,45 MB
- Total Downloaded
- 2,45 MB
So this is good news, I have VU Solo 4k and a TBS5925, I purchased this tuner mainly for multistream.
I installed 5.3 from last night and setup the TBS5925, I moved my dish configuration from tuner B to tuner K of course is the TBS.
This configuration is as follows and all works perfectly on tuner B
Diseqc 1 28.2e
Diseqc 2 13.0e
Diseqc 3 19.2e
Diseqc 4 motorised
Now this confguration with the TBS5925 all works but zapping is very slow with spinner showing sometimes, once channel is locked on signal then even more time (about 6-10 seconds) to decode crypted channels.
In this state it would be unusable for day to day use.
Any way to improve zapping etc, Is the 5.4 beta any better ?
Also when the 5925 is in use the GUI becomes very sluggish and the remote control is not very responsive.
ThanksGeändert von jakey (13.07.2016 um 22:33 Uhr)
-
13.07.2016, 23:35 #3
- Registriert seit
- 17.06.2016
- Beiträge
- 362
- Thanks (gegeben)
- 85
- Thanks (bekommen)
- 222
- Total Downloaded
- 0
- Total Downloaded
- 0
The very same problems also appeared on OSmini receiver but only after it was passed from kernel 4.3 to 4.5 and onwards. Before this zapping was lightning fast and the card was practically as fast as the internal tuner. What kernel Vu Solo 4k is on right now?
This is a video showcasing the speed and zapping on kernel 4.3. As you can see no problems to the slightest!
-
Danke - 2 Thanks
-
14.07.2016, 00:40 #4
- Registriert seit
- 10.06.2014
- Beiträge
- 57
- Thanks (gegeben)
- 19
- Thanks (bekommen)
- 10
- Total Downloaded
- 2,45 MB
- Total Downloaded
- 2,45 MB
Thanks for replying.
On OpenATV 5.3 for the Solo 4k the kernel is 3.14.28.
Perhaps for me the Diseqc switch and motor is just too much for this USB tuner ?
-
14.07.2016, 06:03 #5
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstartercheck dmesg
for usb i/o errors !
i see some time i have many i/o error and e2 have issue
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thanksaivose bedankten sich
-
14.07.2016, 08:54 #6
- Registriert seit
- 10.06.2014
- Beiträge
- 57
- Thanks (gegeben)
- 19
- Thanks (bekommen)
- 10
- Total Downloaded
- 2,45 MB
- Total Downloaded
- 2,45 MB
I have the USB errors too
[32103.878726] tbsusb: usb read 0xb8/4 from adapter 1 failed. (-32)
[31768.959379] tbsusb: usb write 0x80/5 to adapter 1 failed. (-32)
[31771.108674] tbsusb: usb read 0xb8/4 from adapter 1 failed. (-32)
[34339.381409] tbsusb: usb read 0x91/12 from adapter 1 failed. (-32)
When is 5.4 out ?
-
14.07.2016, 09:04 #7
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterwith my tuner , i must switch off the Tuner wait 10 min and switch on again and works, looks tuner overhead
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thanksaivose bedankten sich
-
14.07.2016, 09:06 #8
- Registriert seit
- 17.06.2016
- Beiträge
- 362
- Thanks (gegeben)
- 85
- Thanks (bekommen)
- 222
- Total Downloaded
- 0
- Total Downloaded
- 0
That's a common issue with the card even at kernel 4.3 (always considering Edision OS mini) when the tuner sees no signal while scanning or zapping and during satfinder. This is something to be seen from Enigma2, as the card by default seems to always search for signal despite the given parameters, and this seems to drive Enigma2 and the receivers to their limits! For newer kernels the spinner and delay problems that appeared in addition seem also to have to do with some converters used in skins that however should have no impact otherwise.
The card's behaviour should be further monitored in order to see what's going on.
-
14.07.2016, 09:14 #9
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterlooks some buffers overrun and e2 blocking
beta test image next days i create here
for xtrend et10000
vu zero
osmini
vu solo 4k have issue then you use a dual tuner the drivers have issues from vu, i can build but dual dvb-c/t was broken
usb buffer limits then we have this with osmini and kernel 4.6.3 too ?
openATV we are open Source
Boykott GPL violator
-
Danke - 1 Thanksaivose bedankten sich
-
14.07.2016, 10:18 #10
- Registriert seit
- 10.06.2014
- Beiträge
- 57
- Thanks (gegeben)
- 19
- Thanks (bekommen)
- 10
- Total Downloaded
- 2,45 MB
- Total Downloaded
- 2,45 MB
I have dual DVB-C/T in my Solo 4k working ok now, what issue is there and will this affect operation of the 5925 ?
Lesezeichen