If you mean the radio channels on 11480H 3215 3/4 8PSK on 5.0 W, these channels I can lock!
Regards
zappman
Druckbare Version
If you mean the radio channels on 11480H 3215 3/4 8PSK on 5.0 W, these channels I can lock!
Regards
zappman
Beta tester for a VU + DUO2 and tbs 5925
thanks
New test with 20160809 image:
No signal/lock on MIS transponders with ET8500+TBS5925.
I have installed and tested a little bit the newest version.
My findings:
1. Scanning works OK now
2. PliHD skin crashes so I had to revert to Metrix, which BTW I do not like because it's too invasive(my personal taste of course:-)
3. I couldn't configure right my tuners, and it "disoriented" my motor. It got stuck on 5W and I couldn't find any suitable configuration to make it work again.
So, I reverted to 5.3, which is very very stable, but of course, no multistream.
My setup:
1 motorized dish
1 cable going to 1 receiver
1 x Inverto Black Unicable Quad 40mm LNB 2 Legacy Ports 0,2dB + 1 Splitter
1 x TBS Brand TBS5925 USB DVB-S2 TV Box,Unique USB TV Box supports VCM,CCM,ACM and 32APSK
How to set first and second internal DVB-S2 tuners and then how to set TBS?
new infos from tbs, tbs is very busy to many SAT Tuners and all need open source drivers :)
so need some more time tbs have time to look on drivers and find issue then signal Quality was low.
ET 8500Zitat:
New test with 20160809 image:
No signal/lock on MIS transponders with ET8500+TBS5925.
openatv 5.4 2016-08-09
with TBS 5925 MIS channel locked on 5.0 w
I simply downloaded the tbs drivers from feeds and rebooted my box. I will upload my modified satellite.xml file as soon as i get to my pc
How's the zapping on ET8500 and kernel 4.4.8, are there any spinners and delay?