Thanks Thanks:  38
Seite 5 von 19 ErsteErste ... 3456715 ... LetzteLetzte
Ergebnis 41 bis 50 von 182
  1. #41
    Anfänger
    Registriert seit
    25.07.2016
    Beiträge
    24
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    Zitat Zitat von MCelliotG Beitrag anzeigen
    For people testing TBS, a modified satellites.xml containing the necessary PLS codes and modes would be useful. I created one which is ready to go! Only KU band PLS codes atm!
    Anhang 37905

    Now considering USALS/motor adjustment using TBS. On USALS there seems to be no hussle, everything works quite well. But with manual diseqc there is a great amount of hussle as the card is tuning slower than the internal tuners (this has to be investigated if it's a hardware or kernel issue), but the greatest problem that drives E2 crazy is that the card is tuning constantly, so when there is no signal the whole system is taken to busy state and becomes practically unresponsive.
    hello sorry I'd like to know if openatv "multistream with pls code ready" version will be built for spark 7111 receivers that are able to show that kind of channels without tbs usb tuner.

    thank you very much
    best regards

    •   Alt Advertising

       

  2. #42
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    11.441
    Themenstarter
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    sh4 comes later no free time to test with all platforms sorry


    openATV we are open Source

    Boykott GPL violator

  3. #43

    Registriert seit
    17.06.2016
    Beiträge
    186
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    The satellites.xml file is only to facilitate the auto scan feature of an Enigma2 receiver with any image patched with MIS support. In that sense a Spark 7111 (with Taapat image) will scan the channels with no problem using the same .xml file and the internal tuner which supports MIS!

  4. #44
    Anfänger
    Registriert seit
    19.07.2014
    Beiträge
    14
    Total Downloaded
    33,45 MB
    Total Downloaded
    33,45 MB
    ReceiverDankeAktivitäten
    Zitat Zitat von MCelliotG Beitrag anzeigen
    For people testing TBS, a modified satellites.xml containing the necessary PLS codes and modes would be useful. I created one which is ready to go! Only KU band PLS codes atm!
    .
    I would like to modify my own sat.xml file like you did. Where can i find the specific PLS codes ans other stuff, needed?

    cbandit

  5. #45

    Registriert seit
    17.06.2016
    Beiträge
    186
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    You can use my satellites.xml with a MIS capable tuner and a patched E2 image directly. It will work fine! Now if you really wanna edit your own, you can search the file for pls_id parts and copy them to yours.

  6. #46
    Anfänger
    Registriert seit
    19.07.2014
    Beiträge
    14
    Total Downloaded
    33,45 MB
    Total Downloaded
    33,45 MB
    ReceiverDankeAktivitäten
    I am verry impressed from the 5.4 image. The following screenshots show my first reception of a tv channel (feed) with 32 APSK modulation transmittet at this moment on

    Türksat 42° east.

    I am wondering, why "Multiplex" and "Tuner-Status" show different transponder data.
    Is it DVBS QPSK or DVBS2 32 APSK? The frequency-data are wrong in the "Tuner-Status" Menue.

    Multistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980-42-ost_feed.jpgMultistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980-42-ost_feed1.jpgMultistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980-42-ost_feed3.jpg

    cbandit
    Miniaturansichten angehängter Grafiken Miniaturansichten angehängter Grafiken Multistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980-42-ost_feed_multiplex.jpg   Multistream Support und Treiber Support fuer TBS Tuner wie 5925/TBS5980-42-ost_feed_tuner-status.jpg  

    Geändert von cbandit (27.07.2016 um 21:59 Uhr)

  7. #47

    Registriert seit
    17.06.2016
    Beiträge
    186
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    This is actually normal. In Enigma2 multiplex shows the data the user inputs to lock and download a channel (namely what is contained in the satellites.xml or the data input manually), the tuner status shows the real-time transponder data and this is the actual data. With TBS it doesn't matter what you input to get a lock, only frequency and SR matters, all the rest work the same whatever you input. However if you input incorrect data they will show up as given in the multiplex status, but tuner status will always show the correct data. If you receive ACM transponders like Mediaset on 5W, you can even see the data changing all the time.
    In skins, it's up to the converters used to either display multiplex or tuner status in the infobar.
    Try it for yourself. Make a new manual search with the tuner status data as input. You will see that multiplex and tuner data will sync.

  8. #48
    Mitglied
    Registriert seit
    27.05.2015
    Beiträge
    94
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    So, habe gerade nochmal gebastelt. Also auf 5 West die Italiener klappen super. ABER die Franzosen auf 12648V bekomme ich nicht. Ich habe dann mal ein Messgeraet rangehangen und auf der Frequenz zeigt es NULL Pegel an. Mein Standort ist Suedspanien aber das sollte doch kein Problem sein, die anderen Sender auf dem Super Beam gehen ja auch. Oder ist der Transponder besonders schwach?

  9. #49

    Registriert seit
    17.06.2016
    Beiträge
    186
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    No problem with 12648 in my area, where actually the signal should theoretically be lower. Note that this transponder requires at least 11db for steady picture (I have almost 16db with my 1.30 dish)! Do you tune manually with all the correct data (gold, 121212, id 1-3)?
    By the way after kernel 4.5 , 11448H cannot lock anymore, works fine on 4.3 and PC.

  10. #50
    Mitglied
    Registriert seit
    27.05.2015
    Beiträge
    94
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDankeAktivitäten
    If it requieres at least 11db then this could be the reason why I have problems. On another transponder I measured 12db. I will try with another dish later. Thanks for the information!


Seite 5 von 19 ErsteErste ... 3456715 ... LetzteLetzte

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 11:43 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2018 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com