Thanks Thanks:  4
Seite 2 von 2 ErsteErste 12
Ergebnis 11 bis 19 von 19

Thema: Display

  1. #11
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.766
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    we only show channel numbers a 4x7 to show station names with 4 sign its total nonsense

  2. Thanks buc61b, Lavatronics bedankten sich
    •   Alt Advertising

       

  3. #12
    Anfänger
    Registriert seit
    23.07.2014
    Ort
    Olhao
    Beiträge
    11
    Total Downloaded
    12,72 MB
    Total Downloaded
    12,72 MB
    ReceiverDankeAktivitäten
    Box 1:
    Amiko8900
     
     
    I wanted to thank the team for excellent work in solving the problems.

  4. Thanks Thomas4711 bedankten sich
  5. #13
    Mitglied Avatar von buc61b
    Registriert seit
    18.07.2014
    Ort
    Montenegro - Podgorica
    Beiträge
    95
    Total Downloaded
    5,59 MB
    Total Downloaded
    5,59 MB
    ReceiverDankeAktivitäten
    Box 1:
    Amiko 8900
     
     
    I use the image from 31.7 but after flashing it today and setup all my image, my clock is not ok.
    Can setup? the timer works, but how do i change the time?

    Yes, I have changed the skin, that shoudnt be a problem i guess.
    Code:
    And then ... like a lot of dreams, there's a monster at the end of it.

  6. #14
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    post /var/log/dmesg propably someone sees whats going wrong.



  7. #15
    Mitglied Avatar von buc61b
    Registriert seit
    18.07.2014
    Ort
    Montenegro - Podgorica
    Beiträge
    95
    Total Downloaded
    5,59 MB
    Total Downloaded
    5,59 MB
    ReceiverDankeAktivitäten
    Box 1:
    Amiko 8900
     
     
    Code:
    Linux version 2.6.32.61_stm24_0215 (oe1@buildserver.opena.tv) (gcc version 4.8.2 20131016 (GCC) ) #1 PREEMPT Thu Jul 31 14:05:58 CEST 2014
    Boot params:
    ... MOUNT_ROOT_RDONLY - 00000001
    ... RAMDISK_FLAGS     - 00000000
    ... ORIG_ROOT_DEV     - 00000200
    ... LOADER_TYPE       - 00000000
    ... INITRD_START      - 00000000
    ... INITRD_SIZE       - 00000000
    Booting machvec: sat7111
    Node 0: start_pfn = 0x40000, low = 0x50000
    Zone PFN ranges:
      Normal   0x00040000 -> 0x00050000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
        0: 0x00040000 -> 0x00050000
    On node 0 totalpages: 65536
    free_area_init_node: node 0, pgdat 80b9392c, node_mem_map 80bd1000
      Normal zone: 512 pages used for memmap
      Normal zone: 0 pages reserved
      Normal zone: 65024 pages, LIFO batch:15
    Spark-7111 board initialization
    STx7111 version 3.x
    bpa2: partition 'bigphysarea' created at 0x48000000, size 32768 kB (0x02000000 B)
    bpa2: partition 'LMI_IO' created at 0x4a000000, size 98304 kB (0x06000000 B)
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
    Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock6 rw rootfstype=jffs2 init=/bin/devinit coprocessor_mem=4m@0x40000000,4m@0x40400000 printk=1 stmmaceth=ethaddr:24:00:0A:01:05:FC
    PID hash table entries: 1024 (order: 0, 4096 bytes)
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    PVR=04909200 CVR=60880000 PRR=00009a10
    I-cache : n_ways=2 n_sets=512 way_incr=16384
    I-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
    D-cache : n_ways=2 n_sets=512 way_incr=16384
    D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
    Memory: 116608k/262144k available (2882k kernel code, 777k data, 116k init)
    SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Hierarchical RCU implementation.
    NR_IRQS:600
    Failed to enable clk CLKA_PLL0LS, ignoring
    console [ttyAS0] enabled
    sh_tmu: TMU0 used for clock events
    sh_tmu: TMU0 used for periodic clock events
    sh_tmu: TMU1 used as clock source
    Calibrating delay loop... 448.51 BogoMIPS (lpj=897024)
    Mount-cache hash table entries: 512
    CPU: STx7111
    devtmpfs: initialized
    NET: Registered protocol family 16
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    DMA: Registering DMA API.
    Switching to clocksource TMU1
    NET: Registered protocol family 2
    IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
    TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 8192 bind 8192)
    TCP reno registered
    NET: Registered protocol family 1
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    sq: Registering store queue API.
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    Slow work thread pool: Starting up
    Slow work thread pool: Ready
    NTFS driver 2.1.29 [Flags: R/W].
    JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
    fuse init (API version 7.13)
    JFS: nTxBlock = 911, nTxLock = 7295
    msgmni has been set to 227
    io scheduler noop registered
    io scheduler anticipatory registered (default)
    lirc_dev: IR Remote Control driver registered, major 61 
    lirc-stm: probe found data for platform device lirc-stm
    lirc-stm: STM LIRC plugin using IRQ 125 in IR mode
    lirc_dev: lirc_register_driver: sample_rate: 0
    STMicroelectronics LIRC driver initialized.
    STMicroelectronics ASC driver initialized
    stm-asc.0: ttyAS0 at MMIO 0xfd032000 (irq = 121) is a stm-asc
    physmap platform flash device: 00800000 at 00000000
    physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
     Amd/Fujitsu Extended Query Table at 0x0040
    number of CFI chips: 1
    cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
    cmdlinepart partition parsing not available
    RedBoot partition parsing not available
    Using physmap partition information
    Creating 3 MTD partitions on "physmap-flash":
    0x000000000000-0x000000080000 : "Boot firmware"
    0x000000080000-0x000000780000 : "Kernel"
    0x000000780000-0x000000800000 : "Reserve"
    NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit)
    stm-nand-emi: Using legacy platform timing data
    stm-nand-emi: Configuring EMI Bank 1 for NAND access
    Bad block table found at page 262080, version 0x01
    Bad block table found at page 262016, version 0x01
    cmdlinepart partition parsing not available
    Creating 4 MTD partitions on "stm-nand-emi.0":
    0x000000000000-0x000000800000 : "Spark Kernel"
    0x000000800000-0x000018000000 : "Spark Rootfs"
    0x000018000000-0x000018800000 : "kernel"
    0x000018800000-0x00001ff00000 : "rootfs"
    stmmac - user ID: 0x10, Synopsys ID: 0x33
     No HW DMA feature register supported
     Enhanced/Alternate descriptors
     RX Checksum Offload Engine supported
     TX Checksum insertion supported
     Wake-Up On Lan supported
    STMMAC MII Bus: probed
    eth0: PHY ID 00000000 at 0 IRQ 0 (0:00)
    eth0: PHY ID 0007c0f1 at 1 IRQ 0 (0:01) active
    eth0: PHY ID 00000000 at 2 IRQ 0 (0:02)
    eth0: PHY ID 00000000 at 3 IRQ 0 (0:03)
    eth0: PHY ID 00000000 at 4 IRQ 0 (0:04)
    eth0: PHY ID 00000000 at 5 IRQ 0 (0:05)
    eth0: PHY ID 00000000 at 6 IRQ 0 (0:06)
    eth0: PHY ID 00000000 at 7 IRQ 0 (0:07)
    eth0: PHY ID 00000000 at 8 IRQ 0 (0:08)
    eth0: PHY ID 00000000 at 9 IRQ 0 (0:09)
    eth0: PHY ID 00000000 at 10 IRQ 0 (0:0a)
    eth0: PHY ID 00000000 at 11 IRQ 0 (0:0b)
    eth0: PHY ID 00000000 at 12 IRQ 0 (0:0c)
    eth0: PHY ID 00000000 at 13 IRQ 0 (0:0d)
    eth0: PHY ID 00000000 at 14 IRQ 0 (0:0e)
    eth0: PHY ID 00000000 at 15 IRQ 0 (0:0f)
    eth0: PHY ID 00000000 at 16 IRQ 0 (0:10)
    eth0: PHY ID 00000000 at 17 IRQ 0 (0:11)
    eth0: PHY ID 00000000 at 18 IRQ 0 (0:12)
    eth0: PHY ID 00000000 at 19 IRQ 0 (0:13)
    eth0: PHY ID 00000000 at 20 IRQ 0 (0:14)
    eth0: PHY ID 00000000 at 21 IRQ 0 (0:15)
    eth0: PHY ID 00000000 at 22 IRQ 0 (0:16)
    eth0: PHY ID 00000000 at 23 IRQ 0 (0:17)
    eth0: PHY ID 00000000 at 24 IRQ 0 (0:18)
    eth0: PHY ID 00000000 at 25 IRQ 0 (0:19)
    eth0: PHY ID 00000000 at 26 IRQ 0 (0:1a)
    eth0: PHY ID 00000000 at 27 IRQ 0 (0:1b)
    eth0: PHY ID 00000000 at 28 IRQ 0 (0:1c)
    eth0: PHY ID 00000000 at 29 IRQ 0 (0:1d)
    eth0: PHY ID 00000000 at 30 IRQ 0 (0:1e)
    eth0: PHY ID 00000000 at 31 IRQ 0 (0:1f)
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
    stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
    stm-ehci stm-ehci.0: irq 169, io mem 0xfe1ffe00
    stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 1 port detected
    stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
    stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
    stm-ohci stm-ohci.0: irq 168, io mem 0xfe1ffc00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 1 port detected
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    i2c /dev entries driver
    Linux video capture interface: v2.00
    sh_tmu: TMU0 kept as earlytimer
    sh_tmu: TMU1 kept as earlytimer
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    STMicroelectronics - Coprocessors st231 Init
    st231.0 Coprocessor -------------------------------------------
        flags 0001 RAM start at 0xa0000000  size      0x00400000
                      cop. addr 0x40000000
        Channels : Not defined
        IRQ      : not used
    ---------------------------------------------------------------
    st231.1 Coprocessor -------------------------------------------
        flags 0001 RAM start at 0xa0400000  size      0x00400000
                      cop. addr 0x40400000
        Channels : Not defined
        IRQ      : not used
    ---------------------------------------------------------------
    DMA: Registering fdma_dmac.0 handler (16 channels).
    IRQ 140/fdma_dmac.0: IRQF_DISABLED is not guaranteed on shared IRQs
    stm-fdma stm-fdma.0: firmware: using built-in firmware fdma_STx7111_0.elf
    DMA: Registering fdma_dmac.1 handler (16 channels).
    platform fdma_dmac.0: SLIM hw 0.0, FDMA fw 2.1
    IRQ 141/fdma_dmac.1: IRQF_DISABLED is not guaranteed on shared IRQs
    stm-fdma stm-fdma.1: firmware: using built-in firmware fdma_STx7111_1.elf
    platform fdma_dmac.1: SLIM hw 0.0, FDMA fw 2.5
    Advanced Linux Sound Architecture Driver Version 1.0.21.
    ALSA device list:
      #0: STMicroelectronics STx7111 cut 3.x SOC audio subsystem
    TCP cubic registered
    NET: Registered protocol family 10
    NET: Registered protocol family 17
    usb 1-1: new high speed USB device using stm-ehci and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    scsi 0:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0
    sd 0:0:0:0: [sda] 15564800 512-byte logical blocks: (7.96 GB/7.42 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    usb-storage: device scan complete
    sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] Assuming drive cache: write through
     sda: sda1 sda2
    sd 0:0:0:0: [sda] Assuming drive cache: write through
    sd 0:0:0:0: [sda] Attached SCSI removable disk
    VFS: Mounted root (jffs2 filesystem) on device 31:6.
    devtmpfs: mounted
    Freeing unused kernel memory: 116k freed
    EXT4-fs (sda2): mounted filesystem with ordered data mode
    stmcore-display: using HDMI hotplug
    stmcore-display: STi7111 display probed
    device probe found 2 display pipelines
    requesting frm: 'component.fw', c1196320/87444050
     stm-awg: firmware: requesting component.fw
    frm 'component.fw' successfully loaded
    requesting frm: 'fdvo0.fw', c1196320/8743c110
     stm-awg: firmware: requesting fdvo0.fw
    loading frm: 'fdvo0.fw' failed: -2
    [CEC] init - starting
    [CEC] The above error is a wanted behaviour as this was a ping!
    Fulan front panel driver
    VfdType = 2
    CpuType = 2
    DisplayInfo = 4
    scankeyNum = 8
    swMajorVersion = 1
    swSubVersion = 10
    stby key 0 = 9966da25
    stby key 1 = a25d7887
    stby key 2 = 00000000
    stby key 3 = 00000000
    stby key 4 = 00000000
    blue key 0 = 996648b7
    blue key 1 = a25d52ad
    blue key 2 = 00000000
    blue key 3 = 00000000
    blue key 4 = 00000000
    input: fulan front panel buttons as /devices/virtual/input/input0
    aotom-rtc aotom-rtc: rtc core: registered aotom as rtc0
    aotom_rtc_probe 87438400
    aotom_rtc_probe 2
    stmfb: fb0 parameters = "1280x720-32@50:15m:pal:yuv:yuv"
    stmfb: Starting HDMI Output hdmi = 874a0000
    stmfb: first EDID byte (255) is corrupt, attempting to fix..
    stmfb: Invalid extension header checksum block0
    stmfb: first EDID byte (255) is corrupt, attempting to fix..
    stmfb: Invalid extension header checksum block0
    stmfb: first EDID byte (255) is corrupt, attempting to fix..
    stmfb: Invalid extension header checksum block0
    stmfb: first EDID byte (255) is corrupt, attempting to fix..
    stmfb: Invalid extension header checksum block0
    stmfb: first EDID byte (255) is corrupt, attempting to fix..
    stmfb: Invalid extension header checksum block0
    stmfb: EDID Read Error, setup safe EDID
    stmfb: Setting Safe EDID
    stmfb: fb1 parameters = "<NULL>"
    Init of MME log wrapper
    stm_v4l2_register_driver: driver 'stmvout' registered
    stm_v4l2_register_driver: driver 'stmvbi' registered
    snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
    pseudocard: 1 pseudo soundcard(s) found
    stv090x loaded
    pti: module license 'NO' taints kernel.
    Disabling lock debugging due to kernel taint
    pti loaded (videoMem = 4096, waitMS = 20, enableStatistic = 0)
    no swts ->routing streams from dvr0 direct to the player
    DVB: registering new adapter (STM Streamer)
    0: DeviceContext 87cbe088, DvbDemux 87cbe4c4, DmxDevice 87cbe6ac
    CaInit()
    Initializing CI Controller
    ptiInit context = 87cbe088, demux = 87cbe4c4
    [Spark] Init Stream Routing...
    Load real TC Code
    TC_Data = fe238000, TC_Code = fe23c000
    Readback TC ... successfull
    using videoMem = 770048 (packets = 4096)
    pti: pti_buffer_pool_init: allocate 188 pages (770048 bytes)
    DMA(0) base = 49380000, top = 4943c000, buffer = 49380000, size 770048
    freeBuffer(): free = 1
    stv090x_register_frontend: stv090x DVB: 0.11 
    pti_task: using 1 dma channel
    tuner = 1
    stv090x_register_frontend: init tuner 0
    > (bus = 3) init_stv090x_device
    i2c adapter = 0x87e5e218
    i2c addr = 68
    tuner enable = 0.0
    frontend_init >
    [stv090x_attach]i2c adapter = 87e5e218
     i2c addr=104
    ix7306_write ucIOBuffer 4 Err = 0
    ix7306_write ucIOBuffer 1 Err = 0
    ix7306_write ucIOBuffer Err 2 = 0
    ix7306_read Err = 0 ucData = 0x18
    ========tuner_sharp7306_identify =====
    tuner_Sharp7306 is Identified
    frontend_init: attached
    ix7306_attach: Attaching Sharp BS2S7HZ7306A IX7306 8PSK/QPSK tuner
    frontend_init: IX7306 attached
    init_stv090x_device: Call dvb_register_frontend (adapter = 0x87cbe03c)
    DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
    stv090x_register_frontend: <
    Free session: 0
    Using session 0
    Descrambler Handler = 40000
    install_e2_procs(): entry already in use 'stb/fp/was_timer_wakeup'
    1: DeviceContext 87cbe748, DvbDemux 87cbeb84, DmxDevice 87cbed6c
    CaInit()
    ptiInit context = 87cbe748, demux = 87cbeb84
    Free session: 1
    Using session 1
    Descrambler Handler = 41000
    2: DeviceContext 87cbee08, DvbDemux 87cbf244, DmxDevice 87cbf42c
    CaInit()
    ptiInit context = 87cbee08, demux = 87cbf244
    convert_source(): invalid frontend source (2)
    Free session: 2
    Using session 2
    Descrambler Handler = 42000
    3: DeviceContext 87cbf4c8, DvbDemux 87cbf904, DmxDevice 87cbfaec
    ptiInit context = 87cbf4c8, demux = 87cbf904
    convert_source(): invalid frontend source (3)
    Free session: 3
    Using session 3
    Descrambler Handler = 43000
    stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
    OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
    AllocatorLoadModule : Allocator device loaded
    OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
    H264ppLoadModule : H264pp device loaded
    (bpamem_init): BPAMem driver register result = 0
    Registering device 'sc', major '169'
    Version of smartcard driver: [1.0.1]
    ramzswap: disk size not provided. You can use disksize_kb module param to specify size.
    Using default: (25% of RAM).
    ramzswap: disk size set to 29208 kB
    ramzswap: Initialization done!
    Adding 29204k swap on /dev/ramzswap0.  Priority:-1 extents:1 across:29204k SS
    LinuxDvb:DvbPlaybackCreate: Playback 8697b340
    Geändert von Thomas4711 (02.08.2014 um 16:40 Uhr) Grund: In CODE gesetzt
    Code:
    And then ... like a lot of dreams, there's a monster at the end of it.

  8. #16
    Mitglied Avatar von buc61b
    Registriert seit
    18.07.2014
    Ort
    Montenegro - Podgorica
    Beiträge
    95
    Total Downloaded
    5,59 MB
    Total Downloaded
    5,59 MB
    ReceiverDankeAktivitäten
    Box 1:
    Amiko 8900
     
     
    clean it after someone give answer, its a long log.
    Code:
    And then ... like a lot of dreams, there's a monster at the end of it.

  9. #17
    Avatar von Captain
    Registriert seit
    03.04.2013
    Beiträge
    10.766
    Total Downloaded
    162,35 MB
    Total Downloaded
    162,35 MB
    ReceiverDankeAktivitäten
    you clock is not ok that you mean show wrong time or show nothing ?

    time zone from your location is this correct ?

  10. #18
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.166
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Failed to enable clk CLKA_PLL0LS, ignoring
    console [ttyAS0] enabled
    sh_tmu: TMU0 used for clock events
    sh_tmu: TMU0 used for periodic clock events
    sh_tmu: TMU1 used as clock source
    Calibrating delay loop... 448.51 BogoMIPS (lpj=897024)
    Mount-cache hash table entries: 512
    CPU: STx7111
    devtmpfs: initialized
    NET: Registered protocol family 16
    bio: create slab <bio-0> at 0
    SCSI subsystem initialized
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    DMA: Registering DMA API.
    Switching to clocksource TMU1
    ................



  11. #19
    Mitglied Avatar von buc61b
    Registriert seit
    18.07.2014
    Ort
    Montenegro - Podgorica
    Beiträge
    95
    Total Downloaded
    5,59 MB
    Total Downloaded
    5,59 MB
    ReceiverDankeAktivitäten
    Box 1:
    Amiko 8900
     
     
    Zitat Zitat von Captain Beitrag anzeigen
    you clock is not ok that you mean show wrong time or show nothing ?

    time zone from your location is this correct ?
    shows wrong time, everythings else is ok.




    It was the skin problem, after changes it was required 2times rebot wich i did not and the clock got crazy
    thnx
    Geändert von buc61b (02.08.2014 um 18:45 Uhr)
    Code:
    And then ... like a lot of dreams, there's a monster at the end of it.


Seite 2 von 2 ErsteErste 12

Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 05:43 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2017 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com