Ergebnis 1 bis 5 von 5
  1. #1
    Mitglied
    Registriert seit
    24.05.2013
    Beiträge
    69
    Thanks (gegeben)
    10
    Thanks (bekommen)
    8
    Total Downloaded
    21,06 MB
    Total Downloaded
    21,06 MB
    ReceiverDanke
    Box 1:
    vu+ solo2, ?
     
     
    Box 2:
    TM 5402HD cI +
     
     
    Box 3:
    TM 5402HD CI+
     
     
    Box 4:
    Amiko Alie2 Triple tuner, openatv 4.3
     
     
    Box 5:
    Xcruiser xdsr 420hd, HDMU
     
     

    Installing Enigma2 on a alien2

    For anyone this is the easiest way to install enigma 2 on an Alien2 triple

    HOW TO LOAD ENIGMA2 FIRMWARE WITH SPARK PLUGIN
    USING A USB STICK AND EASY TO FOLLOW ON-SCREEN
    MENU IN SPARK - FOR THE AMIKO ALIEN / ALIEN 2
    Items required:
    USB Stick Formatted to FAT32 – Use HP Format Tool for
    formatting if you have any problems with the USB not being
    seen by the Amiko Alien / Alien 2
    Spark Mini Plugins pack for the Amiko Alien / Alien 2
    Enigma2 Firmware for the Amiko Alien / Alien 2
    1)
    Download the.
    Plugin Pack and save this file to your computer. .
    If you need this pack will pm me
    2)
    Insert a USB stick into your computer, open the Plugin
    Pack file you just downloaded and extract the complete
    plugin directory from the .zip or .rar file to the root of the
    USB stick (which must have been pre-formatted to FAT 32).
    3)
    Now remove the USB stick from your computer and with
    your Amiko Alien / Alien 2 receiver powered on and
    connected to your TV insert the USB stick into a USB port on
    Amiko Alien / Alien 2 receiver (either front or rear USB port
    will work in the case of the Alien 2 - just ensure you have no
    other USB devices connected at the time).
    4)
    Within a few seconds the Amiko Alien / Alien 2 receiver
    will read the USB stick and then automatically prompt you on
    screen saying ‘Confirm Do you want to upgrade plug in?’ –
    Select YES using the remote control arrow keys and then
    press OK on the remote control.
    This will now display the ‘Upgrade from USB’ menu and the
    update will start automatically which will only take a few
    seconds and once complete will automatically reboot your
    receiver. At the point of reboot you can now remove the USB
    stick from the Amiko Alien / Alien 2 (if you don’t then the
    receiver will keep prompting to update after each reboot -
    you can just click no though if you wish).
    5)
    When your Amiko Alien / Alien 2 receiver has finished
    booting back up you should now be back to the usual Spark
    firmware but there will now has several plugins that have
    been installed which can all be found by selecting MENU >
    Plug in using the remote control.
    At this point you are now half way there, we have all the
    tools require to install Enigma2 firmware via Spark so we
    just need to get the Enigma2 firmware itself.
    6)
    Download and save your required Enigma2 firmware for
    the Amiko Alien / Alien 2 to your computer.
    7)
    Insert a USB stick into your computer, open the Enigma2
    firmware file you just
    downloaded and extract the two files from the .zip or .rar file
    to the
    root
    of the USB stick (which must have been pre-
    formatted to FAT 32). These files will be named uImage and
    e2jffs2.img.
    8)
    Now remove the USB stick from your computer and with
    your Amiko Alien / Alien 2 receiver powered on and booted
    to Spark and connected to your TV insert the USB stick into a
    USB port on Amiko Alien / Alien 2 (either front or rear USB
    port in the case of the Alien 2).
    9)
    Within a few seconds the Amiko Alien / Alien 2 receiver
    will read the USB stick. After a few seconds using the remote
    control go to MENU > Plug in > plugin_e2upgrade.s and
    while this is highlighted press the OK button which should
    take you straight to the Enigma2 Update menu.
    10)
    Make sure the Update path is showing as /storage/c/
    (providing the two files where save to the root of your USB
    stick) and then press RED (Enigma2 Update).
    You should see a pop up on-screen explaining about the
    updating Enigma2 and warning you not to power off the
    receiver (this is all automated functions and messages – you
    don’t need press and keys at this point).
    After a short while the message will disappear and you will
    be returned back to the Enigma2 Update menu – at this point
    you are actually finished and Enigma2 is now flashed, so you
    can exit all menus and reboot the receiver yourself and using
    the FORCE function on boot up make the receiver boot into
    Enigma2 mode (by first powering down the receiver and
    then powering on the receiver again while pressing and
    holding the OK button on the front of the receiver until
    FORCE is shown on the front screen, then pressings the
    down arrow (Enigma2) on the front of the receiver and then
    pressing OK on the front of the receiver)
    Your Amiko Alien / Alien 2 is now in Enigma2 mode and so
    will boot to this mode each time as default!
    If you wish to change this back to Spark as the default it’s
    very easy to do, it’s basically using the FORCE function on
    boot up make the receiver boot into Spark mode which is
    done by pressing and holding the OK button on the front of
    the receiver until FORCE is on the front screen, then
    pressings the up arrow (Spark) on the front of the receiver
    and then pressing OK on the front of the receiver.

  2. Thanks - bedankten sich
    •   Alt Advertising

       

  3. #2
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Zitat Zitat von popssad Beitrag anzeigen
    Download the.
    Plugin Pack and save this file to your computer. .
    If you need this pack will pm me
    Why don't you attach the file here, this will be much easier, If you cant please PN it to me.

  4. #3
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke

  5. Thanks -, Venom83 bedankten sich
  6. #4
    Anfänger
    Registriert seit
    04.01.2016
    Beiträge
    1
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Does the aforementioned upgrade/installation procedure also work for Amiko Alien Mini?

  7. #5
    Anfänger
    Registriert seit
    01.10.2014
    Beiträge
    1
    Thanks (gegeben)
    0
    Thanks (bekommen)
    0
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke

    firmware

    Firmware für Amiko Alien 2 und USB-oder Flash? Ich würde USB. Vielen Dank


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 22:02 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 5,00%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com