Ergebnis 1 bis 10 von 12
-
17.10.2015, 10:30 #1
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Bootloader Update Zgemma-Star S/2S/H1/H2
Bootloader Update und neue Treiber für die Zgemma-Star Serie
S/2S/H1/H2
von 02.10.2015
http://www.opena.tv/bootloader/downl...tar-2s-h1.html
Mit Taste Standby an der Front den Bootloader Updaten !
Treiber Update,, ab Image 18.10.2015 im image
We have a new driver for bcm7358 models s / h1/ h2,/2s
I think it will improve the box a lot in streaming, recording and media playback.
Changelog:
Optimize performance
Optimize media playback
Improve unicable
Improve HDMI compatibility
openATV we are open Source
Boykott GPL violator
-
Advertising
-
17.10.2015, 12:01 #2
- Registriert seit
- 17.01.2014
- Beiträge
- 64
- Thanks (gegeben)
- 12
- Thanks (bekommen)
- 17
- Total Downloaded
- 363,2 KB
- Total Downloaded
- 363,2 KB
Captain,
Is the bootloader required for the new drivers?
And is it possible to update the bootloader from a running image?
With mtd-write for example?Geändert von MastaG (17.10.2015 um 12:06 Uhr)
-
17.10.2015, 14:38 #3
- Registriert seit
- 24.06.2013
- Ort
- Österreich
- Beiträge
- 5.027
- Thanks (gegeben)
- 837
- Thanks (bekommen)
- 1492
- Total Downloaded
- 15,72 MB
- Total Downloaded
- 15,72 MB
Box 1:Zgemma H9.TwinBox 2:Edision Optimuss OS1+Box 3:Golden Interstar XPEED LX1Box 4:SpycatBox 5:AX HD60Also die große Performanceverbesserung bei Aufnahmen habe ich mit dem neuen Bootloader und den neuen Treibern auf der Zgemma Star 2S nicht feststellen können. Es laufen weiterhin nur 2 HD-Aufnahmen gleichzeitig. Wobei man eine dieser Aufnahmen zwar zugleich abspielen kann, aber da bremst es dann schon gewaltig. Ab der 3. HD-Aufnahme gibt es Artefakte.
Unicable funzt bei mir problemlos. Allerdings war das auch vorher der Fall. Auch mit HDMI hatte ich keine Probleme. Wobei es natürlich durchaus möglich ist, dass das bei anderen TV's anders war.
Was bei der Optimierung vom Mediaplayback gemeint ist, da bräuchte man mehr Info, um das zu prüfen.
Ja, eins ist noch erwähnenswert. Nach dem Bootloaderupdate übersteuerte meine Logitech Harmony 885. Bei einem normalen Tastendruck sprang die Fernbedienung immer 2 Zeilen statt einer im Menü. Mir der Originalfernbedienung funzte aber alles wie gehabt. Ich habe dann das Programm für die Konfigurierung der Harmony auf meinem PC aufgerufen. Nachdem ich dann mein Gerät Zgemma Star 2S ausgewählt hatte kam schon eine Meldung, dass dafür ein Update zur Verfügung stand. Nach Bestätigung dieses Update durchzuführen und nach laden der Harmony damit, funzt die Harmony wie gewohnt.
@MastaG:
You can flash the bootloader in same way as firmware.______________________
Hans
TV - Hisense Ulra HD
Eutelsat 13°E und Astra 19,2°E Unicable-Matrix mit Wide-LNB
-
Danke - 1 Thanksgooggi bedankten sich
-
17.10.2015, 15:11 #4
- Registriert seit
- 17.01.2014
- Beiträge
- 64
- Thanks (gegeben)
- 12
- Thanks (bekommen)
- 17
- Total Downloaded
- 363,2 KB
- Total Downloaded
- 363,2 KB
I wish I was better at german. :P
The reason why I was asking to update it trough enigma2 was because I wanted to update a few receivers remotely.
But the nand-driver doesn't map the cfe partition
Anyways, the new bootloader is not required for the new dvb drivers
So I'm not going to do it.
I can confirm that media playback has improved a little using the new drivers.
Less CPU load now.
-
17.10.2015, 15:57 #5
- Registriert seit
- 24.06.2013
- Ort
- Österreich
- Beiträge
- 5.027
- Thanks (gegeben)
- 837
- Thanks (bekommen)
- 1492
- Total Downloaded
- 15,72 MB
- Total Downloaded
- 15,72 MB
Box 1:Zgemma H9.TwinBox 2:Edision Optimuss OS1+Box 3:Golden Interstar XPEED LX1Box 4:SpycatBox 5:AX HD60You can change the drivers in easy way.
Make a ftp-connection and change the drivers in
/lib/modules/4.0.1/extra/
I think the reaction of the box to remote control is faster with new bootloader.
But I'm not sure.Geändert von zeini (17.10.2015 um 15:59 Uhr)
______________________
Hans
TV - Hisense Ulra HD
Eutelsat 13°E und Astra 19,2°E Unicable-Matrix mit Wide-LNB
-
17.10.2015, 18:46 #6
- Registriert seit
- 17.01.2014
- Beiträge
- 64
- Thanks (gegeben)
- 12
- Thanks (bekommen)
- 17
- Total Downloaded
- 363,2 KB
- Total Downloaded
- 363,2 KB
Yes I already have the new drivers.
I build my own images.
I was judt curious whether I needed to upgrade the bootloader if I installed the new drivers.
But the drivers work with the old bootloader, so I guess not.
Anyone who knows what has changed with the new bootloader?
-
17.10.2015, 19:24 #7
- Registriert seit
- 03.04.2013
- Beiträge
- 14.861
- Thanks (gegeben)
- 763
- Thanks (bekommen)
- 21093
- Total Downloaded
- 162,47 MB
- Total Downloaded
- 162,47 MB
Themenstarterwe have no more infos thats new
openATV we are open Source
Boykott GPL violator
-
25.12.2016, 01:17 #8
- Registriert seit
- 29.08.2016
- Beiträge
- 131
- Thanks (gegeben)
- 38
- Thanks (bekommen)
- 23
- Total Downloaded
- 0
- Total Downloaded
- 0
Can you please check these drivers on zgemmas or later versions as the latest images for zgemma h1 isn't showing the cable tuner I have had someone replace with these drivers and the tuner shows.
The issue now is that they get tuner lock on abm when scanning satellite. The no tuner display has also been reported on github with no response H1 image not detecting DVB-C tuner * Issue #544 * openatv/enigma2 * GitHub could someone look into this as it makes the latest openatv images for zgemma h1 uselessGeändert von dsayers2014 (25.12.2016 um 01:25 Uhr)
-
26.12.2016, 19:58 #9
- Registriert seit
- 29.08.2016
- Beiträge
- 131
- Thanks (gegeben)
- 38
- Thanks (bekommen)
- 23
- Total Downloaded
- 0
- Total Downloaded
- 0
Bumb is this going to be a fixed for tuner b not showing on tuner configuration on the Zgemma h1?
Also been reported here http://www.opena.tv/english-section/...re-update.htmlGeändert von dsayers2014 (26.12.2016 um 20:34 Uhr)
-
15.04.2019, 14:46 #10
- Registriert seit
- 15.04.2019
- Beiträge
- 1
- Thanks (gegeben)
- 0
- Thanks (bekommen)
- 0
- Total Downloaded
- 476,7 KB
- Total Downloaded
- 476,7 KB
what version of bootloader is this?
the bootloader on my zgemma star s shows v2.88.
Lesezeichen