Thanks Thanks:  4
Seite 2 von 6 ErsteErste 1234 ... LetzteLetzte
Ergebnis 11 bis 20 von 59
  1. #11
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    ja, habe ihn mal jetzt auf standart stellen können nur da kackt es auch ab

    •   Alt Advertising

       

  2. #12
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    flashe gerade wider neu geht nun gar nicht mehr.
    nach dem setup werde ich mal den lok lesen und hier rein stellen

    so habe es nun bis zum update geschaft mal sehen was danach kommt wenn der die 30 aktualisiert hatt
    Geändert von mrbozkurt (12.05.2014 um 17:15 Uhr)

  3. #13
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    Code:
    MetrixHDWeatherStandalone lookup for ID 676757
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGener                                                                             ics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.Seco                                                                             ndInfoBar'>
    [Skin] Attribute not implemented: valign value: center
    [SKIN] No skin to read...
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element From in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.Time                                                                             shiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.Timeshif                                                                             tState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.Timeshift                                                                             State'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.Timeshi                                                                             ftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftStat                                                                             e'>
    RemovePopup, id = ZapError
    MetrixHDWeatherStandalone lookup for ID 676757
    [SCREENNAME]  RdsInfoDisplay
    [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 50
    Setvolume: 50 50 (raw)
    Setvolume: 32 32 (-1db)
    lastshutdown=False              (True = last shutdown was OK)
    NOK shutdown action=normal
    bootup action=normal
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/media/autofs/logs', '/home/root/logs']
    [LogManager] looking in: /media/autofs/logs
    [LogManager] looking in: /home/root/logs
    [NTP]: setting E2 time: 1399908269.98
    [CAMSTARTER] No Cam to Start, Exit
    EMC: Setting EPG language: de_DE
    poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    [VLC] Checking for buildin servicets ...  no
    [VLC] Checking for existing and usable servicets.so ...  No module named service                                                                             ts
    [VLC] Checking for usable gstreamer service ...  yes
    EMC: Next trashcan cleanup in 456 minutes
    EMC: [EMCMS] trashcan cleanup: no trashcan...
    Geändert von Papi2000 (13.05.2014 um 23:48 Uhr) Grund: gecodet

  4. #14
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    ich drehe noch durch hier nun geht wider nichts

  5. #15
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    weis keiner was

  6. #16
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.172
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Das ist kein vollständiger log, da sieht man nichts



  7. #17
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    Code:
    ~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.05.12 18:38:23 =~=~=~=~=~=~=~=~=~=~=~=
    
    
    Welcome to openATV for et4x00
    
    openatv 4.0 et4x00
    
    
    
    
    et4x00 login: root
    root@et4x00:~# init 2
    root@et4x00:~# enigma2
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    10800k video mem
     - double buffering available!
    3600kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    + (9) gLCDDC
    couldn't open LCD - load lcd.ko!
    lcd buffer 0x7ac680 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox remote control (native)" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a remotecontrol
    Input device "front panel" is a remotecontrol
    Found 3 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> 3000
    eHdmiCEC: send message 84 30 00 03 
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    done, found 0 common interface slots
    + (35) CA handler
    + (36) Stream server
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 279 channels/transponders and 4803 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    executing main
    setIoPrio best-effort level 3 ok
    [Harddisk] enumerating block devices...
    [Harddisk] enumerating network mounts...
    SKIN ERROR: {skin_display.xml}: display skin not found. Please contact the skin's author!
    defaulting to standard display skin... skin_display.xml
    main thread is non-idle! display spinner!
    Reading satellites.xml
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7346 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode:  single
    sec config completed
    [NimManager] slot name=BCM7346 (internal)
    [NimManager] multiType = True
    [Time By]: Transponder
    [EPGC] time updated.. but cache file not set yet.. dont start epg!!
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    Unknown device type: front panel
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [VideoMode] setting scaler_sharpness to: 0000000D
    [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 50Hz
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat
    couldn't open /proc/stb/misc/12V_output
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    Setting 3D mode: auto
    Setting 3D depth: 50
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: Xtrend
    [Info-Panel] machinename: ET4000
    [Info-Panel] oem name: xtrend
    [Info-Panel] boxtype: et4x00
    Plugin  Extensions/WebInterface failed to load: No module named plugin
    [AutoTimer] Auto Poll Enabled
    starting hotplug handler
    [NAVIGATION] wasTimerWakeup = False
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Mo 12 Mai 2014 18:38:54 CEST
    [(100, <class 'Screens.InfoBar.InfoBar'>)]
    MetrixHDWeatherStandalone lookup for ID 676757
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    [Skin] Attribute not implemented: valign value: center
    [SKIN] No skin to read...
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element From in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    MetrixHDWeatherStandalone lookup for ID 676757
    [SCREENNAME]  RdsInfoDisplay
    [SKIN] Parsing embedded skin <embedded-in-'InfoBarSummary'>
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 50
    Setvolume: 50 50 (raw)
    Setvolume: 32 32 (-1db)
    lastshutdown=False              (True = last shutdown was OK)
    NOK shutdown action=normal
    bootup action=normal
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/home/root/logs']
    [LogManager] looking in: /home/root/logs
    [LogManager] /home/root/logs: bytesToRemove -10440647
    [NTP]: setting E2 time: 1399912739.2
    [CAMSTARTER] Start/Check: 1
    [CAMSTARTER] no CAM active, starting /var/bin/doscam -c /var/keys/doscam
    playing 1:0:19:6EAA:4B1:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    not enough diskspace for timeshift! (less than 1GB)
    setPixmapNum(0) failed! defined pixmaps: []
    not enough diskspace for timeshift! (less than 1GB)
    not enough diskspace for timeshift! (less than 1GB)
    not enough diskspace for timeshift! (less than 1GB)
    setPixmapNum(0) failed! defined pixmaps: []
    not enough diskspace for timeshift! (less than 1GB)
    not enough diskspace for timeshift! (less than 1GB)
    not enough diskspace for timeshift! (less than 1GB)
    setPixmapNum(0) failed! defined pixmaps: []
    not enough diskspace for timeshift! (less than 1GB)
    not enough diskspace for timeshift! (less than 1GB)
    RemovePopup, id = ZapError
    allocate channel.. 04b1:0001
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12421500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1821 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:19:6EAA:4B1:1:C00000:0:0:0:
    allocate demux
    poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 34(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [SEC] set static current limiting
    set sequence pos 3
    set sequence pos 4
    [SEC] setVoltage 2
    [SEC] sleep 200ms
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
    [SEC] invalidate current switch params
    [SEC] sendDiseqc: e00000(DiSEqC reset)
    [SEC] sleep 50ms
    [SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
    [SEC] sleep 150ms
    [SEC] sendDiseqc: e01038f3(?)
    [SEC] sleep 100ms
    set sequence pos 3
    [SEC] setTone 1
    [SEC] sleep 10ms
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    [SEC] sleep 500ms
    (0)fe event: status 1f, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x20d0e68 running
    [eEPGCache] channel 0x20d0e68 running
    [EPGC] next update in 2 sec
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (157d), and 1 audio stream(s) (157e), and the pcr pid is 157d, and the text pid is 1580
    allocate demux
    TuxTxt cache cleared
    decoder state: play, vpid=5501, apid=5502
    DMX_SET_PES_FILTER(0x157d) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x157e) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(1) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 1 - ok
    DMX_SET_PES_FILTER(0x157d) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x1580) - ttx - ok
    DEMUX_START - ttx - ok
    TuxTxt cache cleared
    TuxTxt: initialized
    TuxTxt service started 1580
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - TuxTxt running thread...(1580)
    ok
    AUDIO_CONTINUE - ok
    AUDIO_CHANNEL_SELECT(0) - ok
    disable teletext subtitles page ffffffffffffffff (und)
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 50
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:19:6EAA:4B1:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:19:6EAA:4B1:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    [eDVBLocalTimerHandler] diff is -1
    [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
    [eDVBLocalTimerHandler] set RTC Time
    [eDVBLocalTimerHandler] update RTC
    [eDVBLocalTimerHandler] time update to 18:39:00
    [eDVBLocalTimerHandler] m_time_difference is -1
    [eDVBLocalTimerHandler] set Linux Time
    PATready
    use pmtpid 15ae for service_id 6eaa
    eventNewProgramInfo 0 0
    dvb subtitle  PID 1581 with wrong subtitling type (24)... force 0x10!!
    have 1 video stream(s) (157d), and 3 audio stream(s) (157e, 157f, 1582), and the pcr pid is 157d, and the text pid is 1580
    decoder state: play, vpid=5501, apid=5502
    dvb subtitle  PID 1581 with wrong subtitling type (24)... force 0x10!!
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 50
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    poll: unhandled POLLERR/HUP/NVAL for fd 53(16)
    [SEC] set dynamic current limiting
    [Dish] tuning failed
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    VIDEO_GET_EVENT - ok
    not enough diskspace for timeshift! (less than 1GB)
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    AITready
    sdt update done!
    [EPGC] start caching events(1399912742)
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 50
    [Volume Adjust] load xml...
    not enough diskspace for timeshift! (less than 1GB)
    Geändert von Thomas4711 (12.05.2014 um 18:58 Uhr) Grund: in CODE gesetzt

  8. #18
    Avatar von zeini
    Registriert seit
    24.06.2013
    Ort
    Österreich
    Beiträge
    2.381
    Total Downloaded
    12,90 MB
    Total Downloaded
    12,90 MB
    ReceiverDankeAktivitäten
    Box 1:
    Azbox Me
     
     
    Box 2:
    Edision Optimuss OS1+
     
     
    Box 3:
    Golden Interstar XPEED LX1
     
     
    Box 4:
    Zgemma Star 2S
     
     
    Die Box nimmt offensichtlich Timeshift auf und hat zu wenig Platz.
    Hast du permanent Timeshift eingestellt? Schalte das mal aus.
    ______________________
    Hans



    AzBox Me, Golden Interstar XPEED Class S2, Edision Optimuss OS1+, Red Eagle Single LCD, Zgemma Star 2S
    TV - Hisense Ulra HD
    Astra 19,2°

  9. #19
    Mitglied
    Registriert seit
    28.06.2013
    Beiträge
    86
    Themenstarter
    Total Downloaded
    176,76 MB
    Total Downloaded
    176,76 MB
    ReceiverDankeAktivitäten
    ich habe nichts eingestellt und wo kann ich es ausschalten

  10. #20
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    13.172
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDankeAktivitäten
    Ist zu dem Zeitpunkt wo der log endet die Box abgestürtzt? Die Prüfung erfolgt Standardmässig




Seite 2 von 6 ErsteErste 1234 ... LetzteLetzte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Diese Website benutzt Cookies
Wir benutzen Cookies um Sitzungsinformationen zu speichern. Dies erleichtert es uns z.B. Dich an Deine Login zu erinnern, Einstellungen der Webseite zu speichern, Inhalte und Werbung zu personalisieren, Social Media Funktionen anzubieten und unser Datenaufkommen zu analysieren. Wir teilen diese Informationen ebenfalls mit unseren Social Media-, Werbe- und Analysepartnern.
     
Alle Zeitangaben in WEZ +1. Es ist jetzt 14:39 Uhr.
Powered by vBulletin® Version 4.2.3 (Deutsch)
Copyright ©2016 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 11,11%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com