Thanks: 0
Ergebnis 1 bis 10 von 11
-
12.09.2013, 20:17 #1pipsenGast
Unibox HD1 plus: "Aufwachen und in den Standby wechseln"
Hey zusammen,
ich habe auf meiner Unibox HD1 plus (OpenATV) folgende Power Management Timer eingerichtet:
- täglich um 00:00 Uhr in den Deep Standby wechseln (wenn ich grad noch TV sehe, werde ich gefragt)
- täglich morgens um 07:00 "Aufwachen und in den Standby wechseln"
Das klappt prima bis auf die Tatsache, dass er nach dem Aufwachen nicht in den Standby wechselt, sondern "richtig an" ist, und das Programm wiedergegeben wird.
Danach passiert nichts mehr. Der Wechsel in den Standby nach dem Boot fehlt.
Habt ihr das Problem auch? Habt ihr vielleicht eine Lösung?
Danke und viele Grüße,
pipsen
Geändert von pipsen (13.09.2013 um 08:36 Uhr)
-
Advertising
-
13.09.2013, 08:36 #2pipsenGast
Hallo nochmal,
könnte das vielleicht mal jemand kurz ausprobieren? Wär wirklich eine feine Sache, dass ich weiß, ob ich ein individuelles Problem habe.
Dankeschön!!
-
14.09.2013, 22:12 #3pipsenGast
Hm.. mag mir niemand helfen? :-/
-
14.09.2013, 23:23 #4
- Registriert seit
- 05.04.2013
- Beiträge
- 425
- Thanks (gegeben)
- 447
- Thanks (bekommen)
- 192
- Total Downloaded
- 10,52 MB
- Total Downloaded
- 10,52 MB
Box 1:VU+Duo4kse OATV 7.2Box 2:VU+Solo4K OATV 7.2Box 3:DM900 UHD OATV 7.2Wenn das mit dem Power timer nicht richtig läuft, versuch mal die Option: "Boot Aktion" = In Standby gehen.
Dann geht die Box allerdings jedes mal beim Starten in den Standby.
Zu finden in : Menue-->Einstellungen-->System--> Extra AnpassungenVU+DUO4kse / VU+Solo4k / DM 900UHD powered by openATV
-
15.09.2013, 08:11 #5
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
It's always better when you attach a log, so we can see what happens.
Just enable crashlog to /home/root/logs and you have a log after wakeup.
So, in the mean time i did test this and saw it's a driver problem.
The driver does not tell's E2 that it was a wake up from deep-standby.
No problem, that's why we have the work-around for and this is enabled for this box.
But it's only working for recordings.
I will look if it's possible to get the work around working for Powertimers.
-
15.09.2013, 10:43 #6
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
Here a test where i added the work around for the powertimers.
Copy these files and restart the gui.
/usr/lib/enigma2/python/mytest.py
/usr/lib/enigma2/python/Navigation.pyo
-
15.09.2013, 20:44 #7pipsenGast
Hello Black_64,
thank you for your files. I replaced both files, but now, the wakeup is not working at all any more. The box stays ins deep standby.
I have no log files in /home/root/logs ...only 3 old crashlogs.
-
15.09.2013, 20:54 #8
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
I dont know how you test but make sure you program at least 10 min in front.
Otherwise your box wil not bootup, because there is a change the bootup time is pasted.
Because the box will wakeup about 4 mins earlyer then you set the time.
I did tested this on my quad and the Venton HD1.
My files wil not change anything at the wake-up, that part was not touched.
My files will take action after the box is booted.
-
15.09.2013, 21:06 #9pipsenGast
Hi again,
you are right, it was too fast... not it is working:
My question:
What trigger do you use for this standby? It is only working, when "wake up to standby" is used? Or can this also happen, when I boot up manually with my remote?
-
15.09.2013, 21:10 #10
- Registriert seit
- 04.04.2013
- Beiträge
- 1.165
- Thanks (gegeben)
- 1297
- Thanks (bekommen)
- 817
- Total Downloaded
- 3,54 MB
- Total Downloaded
- 3,54 MB
Please write in German language.
When the box wakes up or you put your box on with the remote, then it will look if the "wake up to standby" option was set for a powertimer.
If it's set to YES then it will look when then next wake up was set.
If this is in the next 5 mins then it will be recognized as a wake up timer, that wants to set your box in standby.
Of course this is only be done when you have the wor-around enabled.
But for you Venton box, the work around is always enabled.
Lesezeichen