Thema: Vu+ Solo Se schaltet nach Update automatisch in Standby

Hi
Es gibt ein kleines Problem mit dem Openatv 4.2 Image und einer Vu+ Solo Se.

Immer wenn ich ein Update mache und die Box danach neu gestartet wird fährt sie ganz normal hoch schaltet sich nach dem Hochfahren aber sofort in den Standby.

Ich vermute es hat etwas mit der Einstellung : Nach Stromausfall in Standby gehen zu tun.
Nur erstens Sollte der Neustart ja nicht als Stromausfall gewertet werden.
und zweitens kam bei meiner alten Box normalerweise erst noch eine Mitteilung das die Box nicht richtig runtergefahren wurde und in Standby geht.

Kann man das bitte beheben???

Ok beim nächsten Update Versuch ich es mal mitzuloggen.

Gesendet von meinem ME173X mit Tapatalk

Hi

So ich hab das Log aktiviert, Update durchgeführt, Box hat neu gestartet, hat sich automatisch in Standby geschalten.
Dann habe ich sie wieder angeschalten, Das Log deaktiviert.

Und hier ist das Log:

Code:

+ (1) Background File Eraser+ (5) Tuxtxt
+ (8) graphics acceleration manager
+ (9) GFBDC
12150k video mem
setting /dev/tty0 status failed.
 - double buffering available!
5670kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 5760)
+ (9) gLCDDC
found OLED display!
lcd buffer 0x7c82d8 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
+ (21) input device driver
Input device "dreambox advanced remote control (native)" is a keyboard
Found 1 input devices.
+ (22) Hdmi CEC driver
eHdmiCEC: detected physical address change: 1000 --> 1100
eHdmiCEC: send message 84 11 00 03 
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
CI Slot 0 setSource(0)
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 1 common interface slots
+ (35) CA handler
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryHDMI
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
+ (41) Encoders
+ (41) Stream server
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 213 channels/transponders and 3752 services
scanning for frontends..
opening frontend 0
close frontend 0
found 1 adapter, 1 frontends(1 sim) and 5 demux, boxtype 4
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
found 6 spinner!
setIoPrio best-effort level 3 ok
couldn't open /proc/stb/misc/12V_output
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
new Harddisk sdb -> /dev/sdb -> /dev/sdb
[Harddisk] enumerating network mounts...
new Network Mount FRITZNAS -> /media/net/FRITZNAS
Reading satellites.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL6211), need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b_c_d
sec config completed
[NimManager] slot name=Vuplus DVB-S NIM(AVL6211)
[NimManager] multiType = True
[Picon] adding path: /media/usb/picon/
main thread is non-idle! display spinner!
[Time By]: Transponder
[EPGC] time updated.. but cache file not set yet.. dont start epg!!
[FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...executing main
OK (Regular)
[FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
[FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
[FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
 - double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.MySkin.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
[SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
[FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
Activating language Deutsch
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
cannot open /proc/stb/avs/0/input_choices
[VideoMode] setting scaler_sharpness to: 0000000D
[VideoMode] setMode - port: HDMI, mode: 1080p, rate: multi
Renumbering...
[EPGC Loads] Poller enabled.
[EPGC Save] Poller enabled.
[EPGC] setCacheFile read/write epg data from/to '/media/usb/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] 6826 events read from /media/usb/epg.dat
Setting OSD position: 0 720 0 576
Setting OSD alpha: 255
Setting 3D mode: off
Setting 3D depth: 50
[EPGC Save] Poller enabled.
[EPGC Loads] Poller enabled.
FIXME: request for unknown slot
FIXME: request for unknown slot
FIXME: request for unknown slot
Module 'mechanize' loaded
Twisted Agent in use (13, 2, 0)
Module 'ast' loaded
Module 'mechanize' loaded
[Ipkg] Added to OPKG destinations: /
[Info-Panel] machinebrand: Vu+
[Info-Panel] machinename: Solo SE
[Info-Panel] oem name: vuplus
[Info-Panel] boxtype: vusolose
Plugin  Extensions/WebInterface failed to load: No module named plugin
Module 'mechanize' loaded
[TranscodingSetup] set /proc/stb/encoder/enable to enable
[TranscodingSetup] set /proc/stb/encoder/0/bitrate to 400000
[TranscodingSetup] set /proc/stb/encoder/0/framerate to 50000
[TranscodingSetup] set port 8002
Restarting internet superserver: inetd .
--> setting contrast to: 00008000
--> setting saturation to: 00008000
--> setting hue to: 00008000
--> setting brightness to: 00008000
--> setting block_noise_reduction to: 00000000
--> setting mosquito_noise_reduction to: 00000000
--> setting digital_contour_removal to: 00000000
--> setting splitmode to: off
--> setting sharpness to: 00000000
--> setting auto_flesh to: 00000000
--> setting green_boost to: 00000000
--> setting blue_boost to: 00000000
--> setting dynamic_contrast to: 00000000
--> setting color_soace to: Edid(Auto)
--> setting scaler_vertical_dejagging to: disable
--> setting smooth to: disable
--> applying pep values
command ['umount -fl /media/net/FRITZNAS', 'sleep 2', 'mount //192.168.1.1/FRITZ.NAS']
<RemoteControlCode> Write Remote Control Code : 2
eHdmiCEC: send message 84 11 00 03 
[AutoTimer] Auto Poll Enabled
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 1 CI Slots 
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
starting hotplug handler
[PowerTimer] PowerTimerEntry(type=deepstandby, begin=Wed Sep 10 00:00:00 2014)
[PowerTimer] PowerTimerEntry(type=wakeuptostandby, begin=Wed Sep 10 07:00:00 2014)
[NAVIGATION] wasTimerWakeup = True
POWERTIMER: wakeup to standby detected.


[CustomSubservicesPlugin] start


Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
EMC: +++ EMC V3.7.4beta20131015 startup
[AutoBouquetsMaker] AutoStart Enabled
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Di 09 Sep 2014 09:15:12 CEST
[(100, <class 'Screens.InfoBar.InfoBar'>)]
MetrixHDWeatherStandalone lookup for ID 643085
warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
[SCREENNAME]  RdsInfoDisplaySummary
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
RemovePopup, id = ZapError
MetrixHDWeatherStandalone lookup for ID 643085
[SCREENNAME]  RdsInfoDisplay
[SCREENNAME]  InfoBarSummary
[SCREENNAME]  InfoBar
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
lastshutdown=True        (True = last shutdown was OK)
NOK shutdown action=standby
bootup action=normal
killall: showiframe: no process killed
[LogManager] Trim Poll Started
[LogManager] Trash Poll Started
[LogManager] probing folders
[LogManager] found following log's: ['/media/usb/logs', '/home/root/logs']
[LogManager] looking in: /media/usb/logs
[LogManager] /media/usb/logs: bytesToRemove -10475599
[LogManager] looking in: /home/root/logs
[NTP]: setting E2 time: 1410246914.75
eHdmiCEC: send message 7D 
playing 1:0:19:EF75:3F9:1:C00000:0:0:0:
[SCREENNAME]  InfoBar
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
allocate channel.. 03f9:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1714 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
allocate demux
[CAMSTARTER] Start/Check: 1
[CAMSTARTER] no CAM active, starting /usr/bin/CCcam_2.3.0 -t -C /etc/CCcam.cfg
eHdmiCEC: received message 7E 01 
eHdmiCec: volume forwarding to device 05 enabled
poll: unhandled POLLERR/HUP/NVAL for fd 33(17)
poll: unhandled POLLERR/HUP/NVAL for fd 35(17)
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
[eBatch] retval=0, cmds left=2, data:


poll: unhandled POLLERR/HUP/NVAL for fd 46(16)
job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
[EPGC] Saving EPGCache.
[EPGC] store epg to realpath '/media/usb/epg.dat'
[EPGC] 6786 events written to /media/usb/epg.dat
[SEC] set static current limiting
eHdmiCEC: send message 7D 
EMC: Setting EPG language: de_DE
[VLC] Checking for buildin servicets ...  no
[VLC] Checking for existing and usable servicets.so ...  No module named servicets
[VLC] Checking for usable gstreamer service ...  yes
EMC: Next trashcan cleanup in 45 minutes
eHdmiCEC: received message 7E 01 
eHdmiCec: volume forwarding to device 05 enabled
0.0.0.0
192.168
ER plugin not found
[OpenWebif] started on 80
[OpenWebif] started on 443
[eBatch] retval=0, cmds left=1, data:


poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
[EPGC] Refreshing EPGCache.
[EPGC] 6786 events read from /media/usb/epg.dat
set sequence pos 3
set sequence pos 4
job Components.Task.Job name=Prüfe EPG-Zwischenspeicher #tasks=2 completed with [] in None
[SEC] setVoltage 2
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[eBatch] retval=0, cmds left=0, data:


poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 100ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2c033a0 running
[eEPGCache] channel 0x2c033a0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
allocate demux
decoder state: play, vpid=511, apid=515
DMX_SET_PES_FILTER(0x1ff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x203) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1ff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x21) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles page ffffffffffffffff (und)
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[Volume Adjust] New Channel
[Volume Adjust] oldvol = 0
[eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0061 for service_id ef75
eventNewProgramInfo 0 0
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
decoder state: play, vpid=511, apid=515
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
EMC delPathFromCache /hdd/movie/trashcan
EMC: [EMCMS] trashcan cleanup: nothing to delete...
[SEC] set dynamic current limiting
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[Dish] tuning failed
AITready
[SCREENNAME]  InfoBar
[EPGC] start caching events(1410246921)
OCready
sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
[VideoMode] setting aspect: 16:9
[VideoMode] setting wss: auto
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[CAMSTARTER] Start/Check: 2
2014-09-09 09:15:25.195916
[CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
[CAMSTARTER] Cam is running, exit camstarter
[NAVIGATION] TIMER: now entering standby
enter standby
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] free service 1:0:19:EF75:3F9:1:C00000:0:0:0:
setPixmapNum(0) failed! defined pixmaps: []
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SCREENNAME]  StandbySummary
eHdmiCEC: send message 36 
eHdmiCEC: send message 36 
[SCREENNAME]  Standby
eHdmiCEC: received message 36 
eHdmiCEC: send message 44 6C 
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1410246929)
[DVBCAHandler] no more services
release cached channel (timer timeout)
[eDVBLocalTimerHandler] remove channel 0x2c033a0
[eEPGCache] remove channel 0x2c033a0
[EPGC] abort caching events !!
stop release channel timer
close frontend 0
1 74 1
KEY: 116 KEY_POWER POWER 2014-09-09 09:15:37.367900
action ->  StandbyActions power
leave standby
[SCREENNAME]  InfoBarSummary
0 74 1
KEY: 116 KEY_POWER POWER 2014-09-09 09:15:37.710750
playing 1:0:19:EF75:3F9:1:C00000:0:0:0:
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
RemovePopup, id = ZapError
allocate channel.. 03f9:0001
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1714 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:EF75:3F9:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 2
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f2(?)
[SEC] sleep 100ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
eHdmiCEC: send message 04 
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x2c7a7f8 running
[eEPGCache] channel 0x2c7a7f8 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
[EPGC] next update in 2 sec
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
allocate demux
decoder state: play, vpid=511, apid=515
DMX_SET_PES_FILTER(0x1ff) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x203) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x1ff) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x21) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles page ffffffffffffffff (und)
setPixmapNum(0) failed! defined pixmaps: []
setPixmapNum(0) failed! defined pixmaps: []
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
[SCREENNAME]  InfoBar
RemovePopup, id = ZapError
PATready
use pmtpid 0061 for service_id ef75
eventNewProgramInfo 0 0
have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
decoder state: play, vpid=511, apid=515
[Volume Adjust] Update Info
[Volume Adjust] Volume = 100
[Volume Adjust] load xml...
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
[SEC] set dynamic current limiting
[Dish] tuning failed
eHdmiCEC: send message 82 11 00 
sdt update done!
AITready
[SCREENNAME]  InfoBar
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] set RTC Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 09:15:41
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
eHdmiCEC: send message 44 6D 
[EPGC] start caching events(1410246941)
OCready
eHdmiCEC: send message 70 11 00 
eHdmiCEC: received message 72 01 
eHdmiCec: volume forwarding to device 05 enabled
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1410246949)
eHdmiCEC: received message 32 67 65 72 
eHdmiCEC: received message 8D 02 
eHdmiCEC: received message 
eHdmiCEC: send message 8E 00 
[EPGC] schedule finished(1410246952)
[EPGC] stop caching events(1410246952)
[EPGC] next update in 60 min
eHdmiCEC: send message 8E 00 
eHdmiCEC: received message 8C 
eHdmiCEC: send message 87 00 00 00 
1 18f 1
KEY: 399 KEY_GREEN GREEN 2014-09-09 09:15:54.177207
0 18f 1
KEY: 399 KEY_GREEN GREEN 2014-09-09 09:15:54.408283
action ->  InfobarSubserviceSelectionActions GreenPressed
[SCREENNAME]  PluginBrowserSummary
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/PiconsUpdater/plugin.png
[SCREENNAME]  PluginBrowser
eHdmiCEC: received message 46 
eHdmiCEC: send message 47 76 75 73 6F 6C 6F 73 65 
eHdmiCEC: received message A0 00 00 F0 23 
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:56.900695
action ->  SetupActions ok
[SKIN] Parsing embedded skin <embedded-in-'DreamExplorerII'>
warning, skin is missing element TEMPfl in <class 'Plugins.Extensions.DreamExplorer.plugin.DreamExplorerII'>
[SCREENNAME]  ['DreamExplorerII_summary', 'SimpleSummary']
[SCREENNAME]  DreamExplorerII
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:57.026329
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:57.710621
action ->  WizardActions ok
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:57.835015
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-09 09:15:58.133393
action ->  WizardActions left
eHdmiCEC: received message 9F 
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-09 09:15:58.257970
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:58.513330
action ->  WizardActions ok
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:15:58.638328
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.415106
action ->  WizardActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.539189
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.772695
action ->  WizardActions down
eHdmiCEC: received message 87 00 A0 DE 
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:15:59.897009
eHdmiCEC: received message 84 10 00 05 
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:00.099145
action ->  WizardActions ok
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:00.224014
eHdmiCEC: received message 85 
eHdmiCEC: received message 8D 02 
eHdmiCEC: send message 82 11 00 
eHdmiCEC: received message 8D 02 
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:03.121966
action ->  WizardActions back
ignore request to play already running service(1)
[SCREENNAME]  PluginBrowserSummary
[ePNG] couldn't open /usr/lib/enigma2/python/Plugins/Extensions/PiconsUpdater/plugin.png
[SCREENNAME]  PluginBrowser
eHdmiCEC: send message 8E 00 
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:03.354089
eHdmiCEC: send message 8E 00 
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:04.712459
action ->  SetupActions cancel
unknown action SetupActions/cancel! typo in keymap?
action ->  WizardActions back
[SCREENNAME]  InfoBarSummary
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:04.944031
1 8b 1
KEY: 139 KEY_MENU MENU 2014-09-09 09:16:05.972513
action ->  InfobarMenuActions mainMenu
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_mainmenu', 'Menu']
0 8b 1
KEY: 139 KEY_MENU MENU 2014-09-09 09:16:06.207288
1 6a 1
KEY: 106 KEY_RIGHT RIGHT 2014-09-09 09:16:06.989103
0 6a 1
KEY: 106 KEY_RIGHT RIGHT 2014-09-09 09:16:07.113450
1 67 1
KEY: 103 KEY_UP UP 2014-09-09 09:16:07.734442
0 67 1
KEY: 103 KEY_UP UP 2014-09-09 09:16:07.858897
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:08.199407
action ->  OkCancelActions ok
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_setup', 'Menu']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:08.326499
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:09.035744
action ->  OkCancelActions ok
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_system', 'Menu']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:09.336156
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:10.864831
action ->  OkCancelActions ok
warning, skin is missing element HelpWindow in <class 'Screens.VideoMode.VideoSetup'>
warning, skin is missing element footnote in <class 'Screens.VideoMode.VideoSetup'>
[SCREENNAME]  SetupSummary
[SCREENNAME]  ['Setup']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:10.989157
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:12.801063
action ->  SetupActions cancel
[SCREENNAME]  ['MessageBox_summary', 'SimpleSummary']
[SCREENNAME]  ['MessageBox']
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:13.032021
671
2014-09-09 09:16:13.565183
[CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.3.0
Unhandled error in Deferred:
Unhandled Error
Traceback (most recent call last):
  File "/usr/lib/python2.7/threading.py", line 524, in __bootstrap
    
  File "/usr/lib/python2.7/threading.py", line 551, in __bootstrap_inner
    
  File "/usr/lib/python2.7/threading.py", line 504, in run
    
--- <exception caught here> ---
  File "/usr/lib/python2.7/site-packages/twisted/python/threadpool.py", line 191, in _worker
    result = context.call(ctx, function, *args, **kwargs)
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 118, in callWithContext
    return self.currentContext().callWithContext(ctx, func, *args, **kw)
  File "/usr/lib/python2.7/site-packages/twisted/python/context.py", line 81, in callWithContext
    return func(*args,**kw)
  File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 77, in JobTask
    
  File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 196, in doCheck
    
  File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 88, in FrozenCCcam
    
  File "/usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.py", line 27, in confPath
    
exceptions.NameError: global name 'popen' is not defined
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:13.985366
action ->  DirectionActions down
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:14.216034
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:14.407527
action ->  MsgBoxActions ok
[SCREENNAME]  SetupSummary
[SCREENNAME]  ['Setup']
[VideoMode] setting policy: panscan
[VideoMode] setting policy2: letterbox
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_system', 'Menu']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:14.542421
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.241961
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.366223
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.526019
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.651584
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.800636
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:16.925200
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.075214
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.200320
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.379160
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:17.503347
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:17.888999
action ->  OkCancelActions ok
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
accel alloc failed


ERROR: accelAlloc failed
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_extended', 'Menu']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:18.138391
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.143423
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.267983
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.417875
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.542251
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.692493
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.816987
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:19.967015
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.091203
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.241481
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.366215
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.516157
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:20.641024
1 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:20.961847
action ->  OkCancelActions ok
warning, skin is missing element HelpWindow in <class 'Screens.Setup.Setup'>
warning, skin is missing element footnote in <class 'Screens.Setup.Setup'>
[SCREENNAME]  SetupSummary
[SCREENNAME]  ['setup_logs', 'Setup']
0 160 1
KEY: 352 KEY_OK OK 2014-09-09 09:16:21.087877
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:21.831742
action ->  SetupActions down
unknown action SetupActions/down! typo in keymap?
action ->  SetupActions down
unknown action SetupActions/down! typo in keymap?
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:21.956151
1 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:22.264780
action ->  SetupActions down
unknown action SetupActions/down! typo in keymap?
action ->  SetupActions down
unknown action SetupActions/down! typo in keymap?
0 6c 1
KEY: 108 KEY_DOWN DOWN 2014-09-09 09:16:22.389831
1 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-09 09:16:23.087655
action ->  SetupActions left
unknown action SetupActions/left! typo in keymap?
action ->  SetupActions left
0 69 1
KEY: 105 KEY_LEFT LEFT 2014-09-09 09:16:23.211131
1 18f 1
KEY: 399 KEY_GREEN GREEN 2014-09-09 09:16:24.616649
0 18f 1
KEY: 399 KEY_GREEN GREEN 2014-09-09 09:16:24.847111
action ->  SetupActions save
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_extended', 'Menu']
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:26.484605
action ->  OkCancelActions cancel
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_system', 'Menu']
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:26.716065
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.100090
action ->  OkCancelActions cancel
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_setup', 'Menu']
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.331860
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.684419
action ->  OkCancelActions cancel
[SCREENNAME]  MenuSummary
[SCREENNAME]  ['menu_mainmenu', 'Menu']
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:27.916102
1 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:28.224642
action ->  OkCancelActions cancel
[SCREENNAME]  InfoBarSummary
0 ae 1
KEY: 174 KEY_EXIT EXIT 2014-09-09 09:16:28.456059

Ich hoffe es hilft um das Problem zu finden.

Ich habe das Problem eingrenzen können. Der Powertimer funktioniert nicht richtig.
Ich habe normalerweise 2 Timer eingestellt. Einer das die Box um 0 Uhr in Deepstandby fährt.
Der zweite das die Box um 7 Uhr aufwacht und in den Standby fährt.
Der Aufwachtimer macht das Problem. Mittlerweile wird die Box sogar automatisch in den Standby geschickt wenn ich ein Manuellen Neustart mache.
Sobald ich den Aufwachtimer deaktiviere ist alles normal. Auch wenn ein Update gefahren wird und die Box neustartet bleibt sie dann an.

Es liegt also am Powertimer. Ich habe das mal mit der Zeitangabe getestet. Wenn ich die Box Aufwachen und in Standby fahren lassen will wiederholend von 7 Uhr bis 7:05 Uhr
Löst der Timer auch ausserhalb der Zeit aus z.b. wenn ich um 11 Uhr die Box manuell neustarte. Das darf eigentlich nicht sein

Zitat von Black_64

Danke fur das log !!

Can you try this file?
Copy it to /usr/lib/enigma2/python/Plugins/Extensions/Infopanel/CamCheck.pyo and REBOOT your box.

Ich habe die Datei ersetzt. Die Box reagiert normal und läuft wie vorher auch. Der angegebene Fehler liegt wohl am Powertimer.