Thema: Box bleibt beim Booten stehen ...

Telenet geht jetzt auch nicht mehr.Was heisst Kaltstart? An Aus mit Stecker ziehen?

Warmstart = Normaler Neustart, Reset, usw., also wobei das Gerät an und damit "warm" bleibt.
Kaltstart = Ganz aus (Power-Schalter, Netzstecker ziehen, ...), also über den stromlosen Zustand, wobei das Gerät (theoretisch) kalt wird.

Danke. Kaltstart habe ich gemacht und auch versucht mit Stick nochmal 4.1 und auch 4.2 zu flashen - es tut sich aber absolut nichts!

Dann versuch doch mal, "kalt" etwas wörtlicher zu nehmen und vor dem Neustart ein bißchen zu warten.

Bei meiner Vu+ Ultimo mußte ich es auch x Mal probieren, bis die wieder gestartet ist.

Komme jetzt mit FileZilla drauf var/log/ sind aber keine Infos. Bin ich da richtig?

/var/log/messages
heißt die Datei

Oder per telnet/ssh

Code:

dmesg

eingeben.

root@gbquadplus:~# dmesgRPC: Registered named UNIX socket transport module.RPC: Registered udp transport module.RPC: Registered tcp transport module.RPC: Registered tcp NFSv4.1 backchannel transport module.futex hash table entries: 512 (order: 4, 65536 bytes)NFS: Registering the id_resolver key typeKey type id_resolver registeredKey type id_legacy registerednfs4filelayout_init: NFSv4 File Layout Driver Registering...Installing knfsd (copyright (C) 1996 okir@monad.swb.de).fuse init (API version 7.22)msgmni has been set to 1021io scheduler noop registeredio scheduler cfq registered (default)Serial: 8250/16550 driver, 4 ports, IRQ sharing disabledserial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 1655 0Aconsole [ttyS0] enabledserial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 1655 0Aserial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 1655 0Aloop: module loadedahci strict-ahci.0: can't get clock__clk_enable: sata [1]bcm40nm_pm_sata_enable 00ahci strict-ahci.0: SSS flag set, parallel bus scan disabledahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mod eahci strict-ahci.0: flags: sntf stag clo pmp slum partscsi0 : ahci_platformscsi1 : ahci_platformscsi2 : ahci_platformata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41ata3: DUMMYbrcmstb_nand: NAND controller driver is loaded__clk_enable: network [1]__clk_enable: enet [1]bcm40nm_pm_genet_enable 00Found PHY at Address 3bcmgenet: configuring instance #0 for external RGMIIata1: SATA link down (SStatus 0 SControl 300)__clk_disable: enet [0]bcm40nm_pm_genet_disable 00__clk_disable: network [0]__clk_enable: network [1]__clk_enable: moca_genet [1]bcm40nm_pm_genet1_enable 00__clk_enable: moca [1]bcm40nm_pm_moca_enable 00ata2: SATA link down (SStatus 0 SControl 300)No PHY detected, not registering interface:1__clk_disable: moca [0]bcm40nm_pm_moca_disable 00__clk_disable: moca_genet [0]bcm40nm_pm_genet1_disable 00__clk_disable: network [0]bcmgenet: probe of bcmgenet.1 failed with error -5usbcore: registered new interface driver zd1201ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver__clk_enable: usb [1]bcm40nm_pm_usb_enable 00ehci-brcm ehci-brcm.0: Broadcom STB EHCIehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00hub 1-0:1.0: USB hub foundhub 1-0:1.0: 1 port detectedehci-brcm ehci-brcm.1: Broadcom STB EHCIehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00hub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detectedehci-brcm ehci-brcm.2: Broadcom STB EHCIehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00hub 3-0:1.0: USB hub foundhub 3-0:1.0: 1 port detectedehci-brcm ehci-brcm.3: Broadcom STB EHCIehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00hub 4-0:1.0: USB hub foundhub 4-0:1.0: 1 port detectedohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci-brcm ohci-brcm.0: Broadcom STB OHCIohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400hub 5-0:1.0: USB hub foundhub 5-0:1.0: 1 port detectedohci-brcm ohci-brcm.1: Broadcom STB OHCIohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600hub 6-0:1.0: USB hub foundhub 6-0:1.0: 1 port detectedohci-brcm ohci-brcm.2: Broadcom STB OHCIohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400hub 7-0:1.0: USB hub foundhub 7-0:1.0: 1 port detectedohci-brcm ohci-brcm.3: Broadcom STB OHCIohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600hub 8-0:1.0: USB hub foundhub 8-0:1.0: 1 port detectedusbcore: registered new interface driver usb-storagemousedev: PS/2 mouse device common for all micei2c /dev entries driverusbcore: registered new interface driver btusbhidraw: raw HID events driver (C) Jiri Kosinausbcore: registered new interface driver usbhidusbhid: USB HID core driverTCP: cubic registeredNET: Registered protocol family 17Bluetooth: HIDP (Human Interface Emulation) ver 1.2Bluetooth: HIDP socket layer initializedKey type dns_resolver registeredPM: CP0 COUNT/COMPARE frequency does not depend on divisorEBI CS0: setting up NAND flash (primary)nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdcnand: AMD/Spansion S34ML04G1nand: 512MiB, SLC, page size: 2048, OOB size: 64nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdcnand: AMD/Spansion S34ML04G1nand: 512MiB, SLC, page size: 2048, OOB size: 64brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha mming ECCusb 4-1: new high-speed USB device number 2 using ehci-brcmBad block table found at page 262080, version 0x01Bad block table found at page 262016, version 0x01Creating 4 MTD partitions on "brcmnand.0":0x000001000000-0x000020000000 : "rootfs"0x000001000000-0x000020000000 : "rootfs(redundant)"0x000000200000-0x000000900000 : "kernel"0x000000900000-0x000000a00000 : "mac"UBI: attaching mtd0 to ubi0usb-storage 4-1:1.0: USB Mass Storage device detectedscsi3 : usb-storage 4-1:1.0random: nonblocking pool is initializedusb 2-1: new high-speed USB device number 2 using ehci-brcmusb-storage 2-1:1.0: USB Mass Storage device detectedscsi4 : usb-storage 2-1:1.0scsi 3:0:0:0: Direct-Access USB Disk 2.60 PQ: 0 ANSI: 2sd 3:0:0:0: Attached scsi generic sg0 type 0sd 3:0:0:0: [sda] 2071552 512-byte logical blocks: (1.06 GB/1011 MiB)sd 3:0:0:0: [sda] Write Protect is offsd 3:0:0:0: [sda] Mode Sense: 0b 00 00 08sd 3:0:0:0: [sda] No Caching mode page foundsd 3:0:0:0: [sda] Assuming drive cache: write throughsd 3:0:0:0: [sda] No Caching mode page foundsd 3:0:0:0: [sda] Assuming drive cache: write through sda: sda1sd 3:0:0:0: [sda] No Caching mode page foundsd 3:0:0:0: [sda] Assuming drive cache: write throughsd 3:0:0:0: [sda] Attached SCSI removable diskscsi 4:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6sd 4:0:0:0: Attached scsi generic sg1 type 0sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)sd 4:0:0:0: [sdb] Write Protect is offsd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUAUBI: scanning is finishedUBI: attached mtd0 (name "rootfs", size 496 MiB) to ubi0UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytesUBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048UBI: VID header offset: 2048 (aligned 2048), data offset: 4096UBI: good PEBs: 3964, bad PEBs: 4, corrupted PEBs: 0UBI: user volume: 1, internal volumes: 1, max. volumes count: 128UBI: max/mean erase counter: 46/33, WL threshold: 4096, image sequence number: 1 09108774UBI: available PEBs: 0, total reserved PEBs: 3964, PEBs reserved for bad PEB han dling: 76UBI: background thread "ubi_bgt0d" started, PID 64ALSA device list: No soundcards found. sdb: sdb1sd 4:0:0:0: [sdb] Attached SCSI diskUBIFS: background thread "ubifs_bgt0_0" started, PID 65UBIFS: recovery neededUBIFS: recovery completedUBIFS: mounted UBI device 0, volume 0, name "rootfs"UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/20 48 bytesUBIFS: FS size: 491778048 bytes (468 MiB, 3873 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)UBIFS: reserved for root: 0 bytes (0 KiB)UBIFS: media format: w4/r0 (latest is w4/r0), UUID C255FB88-4DC6-4D77-A6D7-F75B3 43F5454, small LPT modelVFS: Mounted root (ubifs filesystem) on device 0:10.devtmpfs: mountedFreeing unused kernel memory: 220K (80819000 - 80850000)EXT4-fs (sda1): recovery completeEXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)EXT4-fs (sdb1): recovery completeEXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)CIFS: Unknown mount option "tcp"CIFS: Unknown mount option "tcp"input: gigablue remote control as /devices/virtual/input/input0DVB: registering new adapter (gbquadplus)dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal)) ...dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal)) ...usbcore: registered new interface driver smsc75xxboxmodel: module license 'proprietary' taints kernel.Disabling lock debugging due to kernel taint__clk_enable: network [1]__clk_enable: enet [1]bcm40nm_pm_genet_enable 00bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex__clk_disable: enet [0]bcm40nm_pm_genet_disable 00__clk_disable: network [0]__clk_enable: network [1]__clk_enable: enet [1]bcm40nm_pm_genet_enable 00NET: Registered protocol family 10svc: failed to register lockdv1 RPC service (errno 124).CIFS: Unknown mount option "tcp"CIFS: Unknown mount option "tcp"root@gbquadplus:~# root@gbquadplus:~# dmesgRPC: Registered udp transport module.RPC: Registered tcp transport module.RPC: Registered tcp NFSv4.1 backchannel transport module.futex hash table entries: 512 (order: 4, 65536 bytes)NFS: Registering the id_resolver key typeKey type id_resolver registeredKey type id_legacy registerednfs4filelayout_init: NFSv4 File Layout Driver Registering...Installing knfsd (copyright (C) 1996 okir@monad.swb.de).fuse init (API version 7.22)msgmni has been set to 1021io scheduler noop registered-sh: root@gbquadplus:~#: command not foundroot@gbquadplus:~# RPC: Registered named UNIX socket transport module.-sh: RPC:: command not foundroot@gbquadplus:~# RPC: Registered udp transport module.serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 1655 0Aserial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 1655 0Aloop: module loadedahci strict-ahci.0: can't get clock__clk_enable: sata [1]-sh: RPC:: command not foundbcm40nm_pm_sata_enable 00ahci strict-ahci.0: SSS flag set, parallel bus scan disabledahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mod eroot@gbquadplus:~# RPC: Registered tcp transport module.scsi1 : ahci_platformscsi2 : ahci_platformata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41-sh: RPC:: command not foundata3: DUMMYbrcmstb_nand: NAND controller driver is loaded__clk_enable: network [1]root@gbquadplus:~# RPC: Registered tcp NFSv4.1 backchannel transport module.__clk_enable: moca_genet [1]bcm40nm_pm_genet1_enable 00__clk_enable: moca [1]bcm40nm_pm_moca_enable 00ata2: SATA link down (SStatus 0 SControl 300)No PHY detected, not registering interface:1__clk_disable: moca [0]bcm40nm_pm_moca_disable 00-sh: RPC:: command not found__clk_disable: moca_genet [0]bcm40nm_pm_genet1_disable 00root@gbquadplus:~# futex hash table entries: 512 (order: 4, 65536 bytes)-sh: syntax error near unexpected token `('ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300root@gbquadplus:~# NFS: Registering the id_resolver key typeehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00hub 2-0:1.0: USB hub foundhub 2-0:1.0: 1 port detected-sh: NFS:: command not foundehci-brcm ehci-brcm.2: Broadcom STB EHCIehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3root@gbquadplus:~# Key type id_resolver registered-sh: Key: command not foundroot@gbquadplus:~# Key type id_legacy registered-sh: Key: command not foundhub 3-0:1.0: USB hub foundhub 3-0:1.0: 1 port detectedehci-brcm ehci-brcm.3: Broadcom STB EHCIroot@gbquadplus:~# nfs4filelayout_init: NFSv4 File Layout Driver Registering...-sh: nfs4filelayout_init:: command not foundroot@gbquadplus:~# Installing knfsd (copyright (C) 1996 okir@monad.swb.de).-sh: syntax error near unexpected token `('root@gbquadplus:~# fuse init (API version 7.22)-sh: syntax error near unexpected token `('root@gbquadplus:~# msgmni has been set to 1021-sh: msgmni: command not foundroot@gbquadplus:~# io scheduler noop registered-sh: io: command not foundroot@gbquadplus:~# io scheduler cfq registered (default)-sh: syntax error near unexpected token `('root@gbquadplus:~# Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled-sh: Serial:: command not foundroot@gbquadplus:~# serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A-sh: syntax error near unexpected token `('root@gbquadplus:~# console [ttyS0] enabled-sh: console: command not foundroot@gbquadplus:~# serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A-sh: syntax error near unexpected token `('root@gbquadplus:~# serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A-sh: syntax error near unexpected token `('root@gbquadplus:~# loop: module loaded-sh: loop:: command not foundroot@gbquadplus:~# ahci strict-ahci.0: can't get clock> __clk_enable: sata [1]> bcm40nm_pm_sata_enable 00> ahci strict-ahci.0: SSS flag set, parallel bus scan disabled> ahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform m ode> ahci strict-ahci.0: flags: sntf stag clo pmp slum part> scsi0 : ahci_platform> scsi1 : ahci_platform> scsi2 : ahci_platform> ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41> ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41> ata3: DUMMY> brcmstb_nand: NAND controller driver is loaded> __clk_enable: network [1]> __clk_enable: enet [1]> bcm40nm_pm_genet_enable 00> Found PHY at Address 3> bcmgenet: configuring instance #0 for external RGMII> ata1: SATA link down (SStatus 0 SControl 300)> __clk_disable: enet [0]> bcm40nm_pm_genet_disable 00> __clk_disable: network [0]> __clk_enable: network [1]> __clk_enable: moca_genet [1]> bcm40nm_pm_genet1_enable 00> __clk_enable: moca [1]> bcm40nm_pm_moca_enable 00> ata2: SATA link down (SStatus 0 SControl 300)> No PHY detected, not registering interface:1> __clk_disable: moca [0]> bcm40nm_pm_moca_disable 00> __clk_disable: moca_genet [0]> bcm40nm_pm_genet1_disable 00> __clk_disable: network [0]> bcmgenet: probe of bcmgenet.1 failed with error -5> usbcore: registered new interface driver zd1201> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver> __clk_enable: usb [1]> bcm40nm_pm_usb_enable 00> ehci-brcm ehci-brcm.0: Broadcom STB EHCI> ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1> ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300> ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00> hub 1-0:1.0: USB hub found> hub 1-0:1.0: 1 port detected> ehci-brcm ehci-brcm.1: Broadcom STB EHCI> ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2> ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500> ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00> hub 2-0:1.0: USB hub found> hub 2-0:1.0: 1 port detected> ehci-brcm ehci-brcm.2: Broadcom STB EHCI> ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3> ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300> ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00> hub 3-0:1.0: USB hub found> hub 3-0:1.0: 1 port detected> ehci-brcm ehci-brcm.3: Broadcom STB EHCI> ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4> ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500> ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00> hub 4-0:1.0: USB hub found> hub 4-0:1.0: 1 port detectedhub 5-0:1.0: USB hub found> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driverohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400> ohci-brcm ohci-brcm.0: Broadcom STB OHCIhub 8-0:1.0: 1 port detectedusbcore: registered new interface driver usb-storage> ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5> ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400> hub 5-0:1.0: USB hub found> hub 5-0:1.0: 1 port detected> ohci-brcm ohci-brcm.1: Broadcom STB OHCI> ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6> ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600Bluetooth: HIDP socket layer initialized> hub 6-0:1.0: USB hub foundnand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc> hub 6-0:1.0: 1 port detectedbrcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha mming ECC> ohci-brcm ohci-brcm.2: Broadcom STB OHCI0x000000200000-0x000000900000 : "kernel"> ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7> ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400> hub 7-0:1.0: USB hub found> hub 7-0:1.0: 1 port detected> ohci-brcm ohci-brcm.3: Broadcom STB OHCI> ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8> ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600UBI: good PEBs: 3964, bad PEBs: 4, corrupted PEBs: 0> hub 8-0:1.0: USB hub foundALSA device list:> hub 8-0:1.0: 1 port detected> usbcore: registered new interface driver usb-storagedevtmpfs: mounted> mousedev: PS/2 mouse device common for all mice> i2c /dev entries driver> usbcore: registered new interface driver btusb> hidraw: raw HID events driver (C) Jiri Kosina> usbcore: registered new interface driver usbhid> usbhid: USB HID core driver> TCP: cubic registered> NET: Registered protocol family 17> Bluetooth: HIDP (Human Interface Emulation) ver 1.2> Bluetooth: HIDP socket layer initialized> Key type dns_resolver registered> PM: CP0 COUNT/COMPARE frequency does not depend on divisor> EBI CS0: setting up NAND flash (primary)> nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc> nand: AMD/Spansion S34ML04G1> nand: 512MiB, SLC, page size: 2048, OOB size: 64> nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc> nand: AMD/Spansion S34ML04G1> nand: 512MiB, SLC, page size: 2048, OOB size: 64> brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC> usb 4-1: new high-speed USB device number 2 using ehci-brcm> Bad block table found at page 262080, version 0x01> Bad block table found at page 262016, version 0x01> Creating 4 MTD partitions on "brcmnand.0":> 0x000001000000-0x000020000000 : "rootfs"> 0x000001000000-0x000020000000 : "rootfs(redundant)"> 0x000000200000-0x000000900000 : "kernel"> 0x000000900000-0x000000a00000 : "mac"> UBI: attaching mtd0 to ubi0> usb-storage 4-1:1.0: USB Mass Storage device detected> scsi3 : usb-storage 4-1:1.0> random: nonblocking pool is initialized> usb 2-1: new high-speed USB device number 2 using ehci-brcm> usb-storage 2-1:1.0: USB Mass Storage device detected> scsi4 : usb-storage 2-1:1.0> scsi 3:0:0:0: Direct-Access USB Disk 2.60 PQ: 0 ANSI: 2> sd 3:0:0:0: Attached scsi generic sg0 type 0> sd 3:0:0:0: [sda] 2071552 512-byte logical blocks: (1.06 GB/1011 MiB)> sd 3:0:0:0: [sda] Write Protect is off> sd 3:0:0:0: [sda] Mode Sense: 0b 00 00 08> sd 3:0:0:0: [sda] No Caching mode page found> sd 3:0:0:0: [sda] Assuming drive cache: write through> sd 3:0:0:0: [sda] No Caching mode page found> sd 3:0:0:0: [sda] Assuming drive cache: write through> sda: sda1> sd 3:0:0:0: [sda] No Caching mode page found> sd 3:0:0:0: [sda] Assuming drive cache: write through> sd 3:0:0:0: [sda] Attached SCSI removable disk> scsi 4:0:0:0: Direct-Access TOSHIBA External USB 3.0 0 PQ: 0 ANSI: 6> sd 4:0:0:0: Attached scsi generic sg1 type 0> sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)> sd 4:0:0:0: [sdb] Write Protect is off> sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00> sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support D PO or FUA-sh: ahci: command not foundroot@gbquadplus:~# UBI: scanning is finished-sh: UBI:: command not foundroot@gbquadplus:~# UBI: attached mtd0 (name "rootfs", size 496 MiB) to ubi0-sh: syntax error near unexpected token `('root@gbquadplus:~# UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes-sh: syntax error near unexpected token `('root@gbquadplus:~# UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048-sh: UBI:: command not foundroot@gbquadplus:~# UBI: VID header offset: 2048 (aligned 2048), data offset: 409 6-sh: syntax error near unexpected token `('root@gbquadplus:~# UBI: good PEBs: 3964, bad PEBs: 4, corrupted PEBs: 0-sh: UBI:: command not foundroot@gbquadplus:~# UBI: user volume: 1, internal volumes: 1, max. volumes count: 128-sh: UBI:: command not foundroot@gbquadplus:~# UBI: max/mean erase counter: 46/33, WL threshold: 4096, image sequence number: 109108774-sh: UBI:: command not foundroot@gbquadplus:~# UBI: available PEBs: 0, total reserved PEBs: 3964, PEBs reser ved for bad PEB handling: 76-sh: UBI:: command not foundroot@gbquadplus:~# UBI: background thread "ubi_bgt0d" started, PID 64-sh: UBI:: command not foundroot@gbquadplus:~# ALSA device list:-sh: ALSA: command not foundroot@gbquadplus:~# No soundcards found.-sh: No: command not foundroot@gbquadplus:~# sdb: sdb1-sh: sdb:: command not foundroot@gbquadplus:~# sd 4:0:0:0: [sdb] Attached SCSI disk-sh: sd: command not foundroot@gbquadplus:~# UBIFS: background thread "ubifs_bgt0_0" started, PID 65-sh: UBIFS:: command not foundroot@gbquadplus:~# UBIFS: recovery needed-sh: UBIFS:: command not foundroot@gbquadplus:~# UBIFS: recovery completed-sh: UBIFS:: command not foundroot@gbquadplus:~# UBIFS: mounted UBI device 0, volume 0, name "rootfs"-sh: UBIFS:: command not foundroot@gbquadplus:~# UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit s izes: 2048 bytes/2048 bytes-sh: syntax error near unexpected token `('root@gbquadplus:~# UBIFS: FS size: 491778048 bytes (468 MiB, 3873 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)-sh: syntax error near unexpected token `('root@gbquadplus:~# UBIFS: reserved for root: 0 bytes (0 KiB)-sh: syntax error near unexpected token `('root@gbquadplus:~# UBIFS: media format: w4/r0 (latest is w4/r0), UUID C255FB88-4 DC6-4D77-A6D7-F75B343F5454, small LPT model-sh: syntax error near unexpected token `('root@gbquadplus:~# VFS: Mounted root (ubifs filesystem) on device 0:10.-sh: syntax error near unexpected token `('root@gbquadplus:~# devtmpfs: mounted-sh: devtmpfs:: command not foundroot@gbquadplus:~# Freeing unused kernel memory: 220K (80819000 - 80850000)-sh: syntax error near unexpected token `('root@gbquadplus:~# EXT4-fs (sda1): recovery complete-sh: syntax error near unexpected token `sda1'root@gbquadplus:~# EXT4-fs (sda1): mounted filesystem with ordered data mode. Op ts: (null)-sh: syntax error near unexpected token `sda1'root@gbquadplus:~# EXT4-fs (sdb1): recovery complete-sh: syntax error near unexpected token `sdb1'root@gbquadplus:~# EXT4-fs (sdb1): mounted filesystem with ordered data mode. Op ts: (null)-sh: syntax error near unexpected token `sdb1'root@gbquadplus:~# CIFS: Unknown mount option "tcp"-sh: CIFS:: command not foundroot@gbquadplus:~# CIFS: Unknown mount option "tcp"-sh: CIFS:: command not foundroot@gbquadplus:~# input: gigablue remote control as /devices/virtual/input/inpu t0-sh: input:: command not foundroot@gbquadplus:~# DVB: registering new adapter (gbquadplus)-sh: syntax error near unexpected token `('root@gbquadplus:~# dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB -S2 NIM (internal))...-sh: syntax error near unexpected token `('root@gbquadplus:~# dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB -S2 NIM (internal))...-sh: syntax error near unexpected token `('root@gbquadplus:~# usbcore: registered new interface driver smsc75xx-sh: usbcore:: command not foundroot@gbquadplus:~# boxmodel: module license 'proprietary' taints kernel.-sh: boxmodel:: command not foundroot@gbquadplus:~# Disabling lock debugging due to kernel taint-sh: Disabling: command not foundroot@gbquadplus:~# __clk_enable: network [1]-sh: __clk_enable:: command not foundroot@gbquadplus:~# __clk_enable: enet [1]-sh: __clk_enable:: command not foundroot@gbquadplus:~# bcm40nm_pm_genet_enable 00-sh: bcm40nm_pm_genet_enable: command not foundroot@gbquadplus:~# bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex-sh: bcmgenet: command not foundroot@gbquadplus:~# __clk_disable: enet [0]-sh: __clk_disable:: command not foundroot@gbquadplus:~# bcm40nm_pm_genet_disable 00-sh: bcm40nm_pm_genet_disable: command not foundroot@gbquadplus:~# __clk_disable: network [0]-sh: __clk_disable:: command not foundroot@gbquadplus:~# __clk_enable: network [1]-sh: __clk_enable:: command not foundroot@gbquadplus:~# __clk_enable: enet [1]-sh: __clk_enable:: command not foundroot@gbquadplus:~# bcm40nm_pm_genet_enable 00-sh: bcm40nm_pm_genet_enable: command not foundroot@gbquadplus:~# NET: Registered protocol family 10-sh: NET:: command not foundroot@gbquadplus:~# svc: failed to register lockdv1 RPC service (errno 124).-sh: syntax error near unexpected token `('root@gbquadplus:~# CIFS: Unknown mount option "tcp"-sh: CIFS:: command not foundroot@gbquadplus:~# CIFS: Unknown mount option "tcp"-sh: CIFS:: command not foundroot@gbquadplus:~# root@gbquadplus:~#-sh: root@gbquadplus:~#: command not foundroot@gbquadplus:~# ^C

so kann das niemand lesen. mach das nächste mal in [CODE] hier der Text [/ CODE] und das leerzeichen nach dem / weg

Ich finde da gar keinen kernel panic, sondern lauter "command not found" ....
Also fast, als sei das gesamte root fs platt.

Entweder ist da beim Bauen mächtig was schiefgelaufen oder bei Dir beim Flashen ...
Würde ich als Laie mal so sagen ...

Nun ich hatte vorher nicht den "neuen" Bootlader geflasht. Jetzt Briefbeschwerer?