Ergebnis 301 bis 310 von 389
-
14.05.2016, 17:41 #301
- Registriert seit
- 18.07.2014
- Beiträge
- 10
- Thanks (gegeben)
- 32
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:IPBOX 900HD mit HDMUBox 2:Cuberevo 250HD mit Titan im flashBox 3:Cuberevo mini2 mit PKT 5.3Hallo bruache hilfe?
ich habe seit neusten mein Pc neu formatiert und bekomme jetzt diesen fehler beim neu bauen!
mfg
Code:O=openatv DISTRO_TYPE=release make image check internet connection: Online Loading cache: 100% |###########################################| ETA: 00:00:00 Loaded 3329 entries from dependency cache. Parsing recipes: 100% |#########################################| Time: 00:11:47 Parsing of 3004 .bb files complete (2725 cached, 279 parsed). 3607 targets, 448 skipped, 0 masked, 0 errors. WARNING: No bb files matched BBFILE_PATTERN_local-layer '^/home/ghani/github/openatv/build-enviroment/meta-local/' NOTE: Resolving any missing task queue dependencies Build Configuration: BB_VERSION = "1.29.0" BUILD_SYS = "i686-linux" NATIVELSBSTRING = "Ubuntu-12.04" TARGET_SYS = "sh4-oe-linux" MACHINE = "spark" DISTRO = "openatv" DISTRO_VERSION = "5.3" TUNE_FEATURES = "sh4" meta = "HEAD:e4f6156ffdc840e99b546369493aaf37c4856b3b" meta-oe meta-multimedia meta-networking meta-filesystems meta-python = "HEAD:44f0e74954628d6a3d04fa5249dbe0c94f6dff59" meta-oe meta-airdigital meta-azbox meta-ax meta-blackbox meta-ceryon meta-cube meta-dags meta-dream meta-ebox meta-entwopia meta-formuler meta-fulan meta-gfutures meta-gigablue meta-ini meta-ixuss meta-broadmedia meta-odin meta-protek meta-skylake meta-tripledot meta-ultramini meta-vuplus meta-wetek meta-xp meta-xtrend meta-xcore = "HEAD:b089afa34ef638aad1983da18da7779c44abe425" meta-local = "3.4:bfd36ff3376214e8ba9c02713931601f25f8402e" NOTE: Preparing RunQueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: gettext-0.19.6-r0 do_compile: oe_runmake failed ERROR: gettext-0.19.6-r0 do_compile: Function failed: do_compile (log file is located at /home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/temp/log.do_compile.5085) ERROR: Logfile of failure stored in: /home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/temp/log.do_compile.5085 Log data follows: | DEBUG: SITE files ['endian-little', 'bit-32', 'sh-common', 'common-linux', 'common-glibc', 'sh4-linux', 'common'] | DEBUG: Executing shell function do_compile | NOTE: make -j 8 | make all-recursive | make[1]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build' | Making all in gnulib-local | make[2]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gnulib-local' | make[2]: Nothing to be done for `all'. | make[2]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gnulib-local' | Making all in gettext-runtime | make[2]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | make all-recursive | make[3]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | Making all in doc | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/doc' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/doc' | Making all in intl | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl' | Making all in intl-java | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl-java' | cd ../../../gettext-0.19.6/gettext-runtime/intl-java && test ! -d /usr/lib/jdk1.3.1 || env PATH=/usr/lib/jdk1.3.1/bin:$PATH javadoc -d javadoc2 gnu.gettext gnu/gettext/*.java | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl-java' | Making all in intl-csharp | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl-csharp' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/intl-csharp' | Making all in gnulib-lib | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | make all-recursive | make[5]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | make[6]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | make[6]: Nothing to be done for `all-am'. | make[6]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | make[5]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/gnulib-lib' | Making all in src | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/src' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/src' | Making all in po | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/po' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/po' | Making all in man | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/man' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/man' | Making all in m4 | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/m4' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/m4' | Making all in tests | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/tests' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime/tests' | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | make[3]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | make[2]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-runtime' | Making all in gettext-tools | make[2]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools' | make all-recursive | make[3]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools' | Making all in doc | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/doc' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/doc' | Making all in intl | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/intl' | make[4]: Nothing to be done for `all'. | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/intl' | Making all in gnulib-lib | make[4]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/gnulib-lib' | make all-am | make[5]: Entering directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/gnulib-lib' | ../sh4-oe-linux-libtool --tag=CC --mode=link sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o libcroco_rpl.la libcroco/libcroco_rpl_la-cr-additional-sel.lo libcroco/libcroco_rpl_la-cr-attr-sel.lo libcroco/libcroco_rpl_la-cr-cascade.lo libcroco/libcroco_rpl_la-cr-declaration.lo libcroco/libcroco_rpl_la-cr-doc-handler.lo libcroco/libcroco_rpl_la-cr-enc-handler.lo libcroco/libcroco_rpl_la-cr-fonts.lo libcroco/libcroco_rpl_la-cr-input.lo libcroco/libcroco_rpl_la-cr-num.lo libcroco/libcroco_rpl_la-cr-om-parser.lo libcroco/libcroco_rpl_la-cr-parser.lo libcroco/libcroco_rpl_la-cr-parsing-location.lo libcroco/libcroco_rpl_la-cr-prop-list.lo libcroco/libcroco_rpl_la-cr-pseudo.lo libcroco/libcroco_rpl_la-cr-rgb.lo libcroco/libcroco_rpl_la-cr-sel-eng.lo libcroco/libcroco_rpl_la-cr-selector.lo libcroco/libcroco_rpl_la-cr-simple-sel.lo libcroco/libcroco_rpl_la-cr-statement.lo libcroco/libcroco_rpl_la-cr-string.lo libcroco/libcroco_rpl_la-cr-style.lo libcroco/libcroco_rpl_la-cr-stylesheet.lo libcroco/libcroco_rpl_la-cr-term.lo libcroco/libcroco_rpl_la-cr-tknzr.lo libcroco/libcroco_rpl_la-cr-token.lo libcroco/libcroco_rpl_la-cr-utils.lo | ../sh4-oe-linux-libtool --tag=CC --mode=compile sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c -o libxml/libxml_rpl_la-xmlunicode.lo `test -f 'libxml/xmlunicode.c' || echo '../../../gettext-0.19.6/gettext-tools/gnulib-lib/'`libxml/xmlunicode.c | ../sh4-oe-linux-libtool --tag=CC --mode=compile sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c -o libxml/libxml_rpl_la-xmlwriter.lo `test -f 'libxml/xmlwriter.c' || echo '../../../gettext-0.19.6/gettext-tools/gnulib-lib/'`libxml/xmlwriter.c | ../sh4-oe-linux-libtool --tag=CC --mode=compile sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c -o libxml/libxml_rpl_la-xpath.lo `test -f 'libxml/xpath.c' || echo '../../../gettext-0.19.6/gettext-tools/gnulib-lib/'`libxml/xpath.c | ../sh4-oe-linux-libtool --tag=CC --mode=compile sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c -o libxml/libxml_rpl_la-xpointer.lo `test -f 'libxml/xpointer.c' || echo '../../../gettext-0.19.6/gettext-tools/gnulib-lib/'`libxml/xpointer.c | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xpointer.c -fPIC -DPIC -o libxml/.libs/libxml_rpl_la-xpointer.o | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xmlwriter.c -fPIC -DPIC -o libxml/.libs/libxml_rpl_la-xmlwriter.o | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xpath.c -fPIC -DPIC -o libxml/.libs/libxml_rpl_la-xpath.o | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xmlunicode.c -fPIC -DPIC -o libxml/.libs/libxml_rpl_la-xmlunicode.o | sh4-oe-linux-libtool: error: 'libcroco/libcroco_rpl_la-cr-utils.lo' is not a valid libtool object | make[5]: *** [libcroco_rpl.la] Error 1 | make[5]: *** Waiting for unfinished jobs.... | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xmlunicode.c -o libxml/libxml_rpl_la-xmlunicode.o >/dev/null 2>&1 | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xpointer.c -o libxml/libxml_rpl_la-xpointer.o >/dev/null 2>&1 | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xpath.c -o libxml/libxml_rpl_la-xpath.o >/dev/null 2>&1 | sh4-oe-linux-libtool: compile: sh4-oe-linux-gcc -ml -m4 --sysroot=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark -std=gnu99 -DHAVE_CONFIG_H -DEXEEXT=\"\" -DEXEEXT=\"\" -DEXEEXT=\"\" -I. -I../../../gettext-0.19.6/gettext-tools/gnulib-lib -I.. -I../intl -I../../../gettext-0.19.6/gettext-tools/intl -I.. -I../../../gettext-0.19.6/gettext-tools -DDEPENDS_ON_LIBICONV=1 -DDEPENDS_ON_LIBINTL=1 -DLIBXML_STATIC -I../../../gettext-0.19.6/gettext-tools/gnulib-lib/libcroco -mieee -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/gettext-0.19.6=/usr/src/gettext -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/i686-linux= -fdebug-prefix-map=/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/sysroots/spark= -c ../../../gettext-0.19.6/gettext-tools/gnulib-lib/libxml/xmlwriter.c -o libxml/libxml_rpl_la-xmlwriter.o >/dev/null 2>&1 | make[5]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/gnulib-lib' | make[4]: *** [all] Error 2 | make[4]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools/gnulib-lib' | make[3]: *** [all-recursive] Error 1 | make[3]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools' | make[2]: *** [all] Error 2 | make[2]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build/gettext-tools' | make[1]: *** [all-recursive] Error 1 | make[1]: Leaving directory `/home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/build' | make: *** [all] Error 2 | WARNING: /home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/temp/run.do_compile.5085:1 exit 1 from 'exit 1' | ERROR: oe_runmake failed | ERROR: Function failed: do_compile (log file is located at /home/ghani/github/openatv/build-enviroment/builds/openatv/release/spark/tmp/work/sh4-oe-linux/gettext/0.19.6-r0/temp/log.do_compile.5085) ERROR: Task 930 (/home/ghani/github/openatv/build-enviroment/openembedded-core/meta/recipes-core/gettext/gettext_0.19.6.bb, do_compile) failed with exit code '1' NOTE: Tasks Summary: Attempted 2207 tasks of which 2201 didn't need to be rerun and 1 failed. Waiting for 0 running tasks to finish: Summary: 1 task failed: /home/ghani/github/openatv/build-enviroment/openembedded-core/meta/recipes-core/gettext/gettext_0.19.6.bb, do_compile Summary: There was 1 WARNING message shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code. make: *** [image] Fehler 1 ghani@ghani-MS-6567V2:~/github/openatv/build-enviroment$
-
Advertising
-
16.05.2016, 04:58 #302
- Registriert seit
- 18.07.2014
- Beiträge
- 10
- Thanks (gegeben)
- 32
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:IPBOX 900HD mit HDMUBox 2:Cuberevo 250HD mit Titan im flashBox 3:Cuberevo mini2 mit PKT 5.3kann jemand helfen?
Gesendet von meinem GT-I9300 mit Tapatalk
-
25.05.2016, 19:44 #303
- Registriert seit
- 27.04.2016
- Beiträge
- 3
- Thanks (gegeben)
- 1
- Thanks (bekommen)
- 1
- Total Downloaded
- 0
- Total Downloaded
- 0
Hi how do you do a make clean ?
-
25.05.2016, 19:45 #304
- Registriert seit
- 05.04.2013
- Beiträge
- 481
- Thanks (gegeben)
- 1409
- Thanks (bekommen)
- 3257
- Total Downloaded
- 295,50 MB
- Total Downloaded
- 295,50 MB
Box 1:AX HD51build ordner hast schon mal gelöscht? kommt leider immer mal wieder vor, das es ansonsten nicht durchbaut.
Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]
-
26.05.2016, 09:25 #305
- Registriert seit
- 08.06.2014
- Beiträge
- 2.601
- Thanks (gegeben)
- 778
- Thanks (bekommen)
- 1500
- Total Downloaded
- 22,11 MB
- Total Downloaded
- 22,11 MB
Bekomme beim Image-Bau folgenden Fehler:
Code:ERROR: ffmpeg-3.0.2-r2 do_configure: Function failed: do_configure (log file is located at /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/temp/log.do_configure.10035) ERROR: Logfile of failure stored in: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/temp/log.do_configure.10035 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common'] | DEBUG: Executing shell function autotools_preconfigure | DEBUG: Shell function autotools_preconfigure finished | DEBUG: Executing python function autotools_copy_aclocals | DEBUG: Python function autotools_copy_aclocals finished | DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common'] | DEBUG: Executing shell function do_configure | ERROR: librtmp not found using pkg-config | | If you think configure made a mistake, make sure you are using the latest | version from Git. If the latest version fails, report the problem to the | ffmpeg-user@ffmpeg.org mailing list or IRC #ffmpeg on irc.freenode.net. | Include the log file "config.log" produced by configure as this will help | solve the problem. | WARNING: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/temp/run.do_configure.10035:1 exit 1 from '/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/ffmpeg-3.0.2/configure --disable-stripping --enable-pic --enable-shared --enable-pthreads --enable-nonfree --cross-prefix=mipsel-oe-linux- --ld="mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00" --arch=mipsel --target-os="linux" --enable-cross-compile --extra-cflags=" -Os -pipe -g -feliminate-unused-debug-types -fdebug-prefix-map=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/build=/usr/src/ffmpeg -fdebug-prefix-map=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/ffmpeg-3.0.2=/usr/src/ffmpeg -fdebug-prefix-map=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux= -fdebug-prefix-map=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00= -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00" --extra-ldflags="-Wl,-O1 -Wl,--as-needed" --sysroot="/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00" --enable-hardcoded-tables --disable-static --disable-runtime-cpudetect --disable-ffserver --disable-ffplay --disable-ffprobe --disable-iconv --disable-postproc --disable-doc --disable-altivec --disable-amd3dnow --disable-amd3dnowext --disable-mmx --disable-mmxext --disable-sse --disable-sse2 --disable-sse3 --disable-ssse3 --disable-sse4 --disable-sse42 --disable-avx --disable-xop --disable-fma3 --disable-fma4 --disable-avx2 --disable-armv5te --disable-armv6 --disable-armv6t2 --disable-vfp --disable-neon --disable-inline-asm --disable-yasm --disable-fast-unaligned --disable-muxers --disable-encoders --disable-decoders --enable-decoder=alac --enable-decoder=ape --enable-decoder=atrac1 --enable-decoder=atrac3 --enable-decoder=atrac3p --enable-decoder=cook --enable-decoder=dsd_lsbf --enable-decoder=dsd_lsbf_planar --enable-decoder=dsd_msbf --enable-decoder=dsd_msbf_planar --enable-decoder=eac3 --enable-decoder=evrc --enable-decoder=iac --enable-decoder=imc --enable-decoder=mace3 --enable-decoder=mace6 --enable-decoder=metasound --enable-decoder=mlp --enable-decoder=mp1 --enable-decoder=mp3adu --enable-decoder=mp3on4 --enable-decoder=mpeg1video --enable-decoder=nellymoser --enable-decoder=pcm_alaw --enable-decoder=pcm_bluray --enable-decoder=pcm_dvd --enable-decoder=pcm_f32be --enable-decoder=pcm_f32le --enable-decoder=pcm_f64be --enable-decoder=pcm_f64le --enable-decoder=pcm_lxf --enable-decoder=pcm_mulaw --enable-decoder=pcm_s16be --enable-decoder=pcm_s16be_planar --enable-decoder=pcm_s16le --enable-decoder=pcm_s16le_planar --enable-decoder=pcm_s24be --enable-decoder=pcm_s24daud --enable-decoder=pcm_s24le --enable-decoder=pcm_s24le_planar --enable-decoder=pcm_s32be --enable-decoder=pcm_s32le --enable-decoder=pcm_s32le_planar --enable-decoder=pcm_s8 --enable-decoder=pcm_s8_planar --enable-decoder=pcm_u16be --enable-decoder=pcm_u16le --enable-decoder=pcm_u24be --enable-decoder=pcm_u24le --enable-decoder=pcm_u32be --enable-decoder=pcm_u32le --enable-decoder=pcm_u8 --enable-decoder=pcm_zork --enable-decoder=ra_144 --enable-decoder=ra_288 --enable-decoder=ralf --enable-decoder=s302m --enable-decoder=shorten --enable-decoder=sipr --enable-decoder=sonic --enable-decoder=tak --enable-decoder=truehd --enable-decoder=truespeech --enable-decoder=tta --enable-decoder=wmalossless --enable-decoder=wmapro --enable-decoder=wmav1 --enable-decoder=wmav2 --enable-decoder=wmavoice --enable-decoder=aac --enable-decoder=aac_latm --enable-decoder=adpcm_ct --enable-decoder=adpcm_g722 --enable-decoder=adpcm_g726 --enable-decoder=adpcm_g726le --enable-decoder=adpcm_ima_amv --enable-decoder=adpcm_ima_oki --enable-decoder=adpcm_ima_qt --enable-decoder=adpcm_ima_rad --enable-decoder=adpcm_ima_wav --enable-decoder=adpcm_ms --enable-decoder=adpcm_sbpro_2 --enable-decoder=adpcm_sbpro_3 --enable-decoder=adpcm_sbpro_4 --enable-decoder=adpcm_swf --enable-decoder=adpcm_yamaha --enable-decoder=flac --enable-decoder=g723_1 --enable-decoder=g729 --enable-decoder=opus --enable-decoder=qcelp --enable-decoder=qdm2 --enable-decoder=vorbis --enable-decoder=wavpack --disable-demuxer=adp --disable-demuxer=adx --disable-demuxer=afc --disable-demuxer=anm --disable-demuxer=apc --disable-demuxer=apng --disable-demuxer=ast --disable-demuxer=avs --disable-demuxer=bethsoftvid --disable-demuxer=bfi --disable-demuxer=bink --disable-demuxer=bmv --disable-demuxer=brstm --disable-demuxer=c93 --disable-demuxer=cdg --disable-demuxer=dnxhd --disable-demuxer=dsicin --disable-demuxer=dfa --disable-demuxer=dxa --disable-demuxer=ea --disable-demuxer=ea_cdata --disable-demuxer=frm --disable-demuxer=gif --disable-demuxer=gsm --disable-demuxer=gxf --disable-demuxer=hnm --disable-demuxer=ico --disable-demuxer=ilbc --disable-demuxer=iss --disable-demuxer=jv --disable-demuxer=mm --disable-demuxer=paf --disable-demuxer=pva --disable-demuxer=qcp --disable-demuxer=redspark --disable-demuxer=rl2 --disable-demuxer=roq --disable-demuxer=rsd --disable-demuxer=rso --disable-demuxer=siff --disable-demuxer=smjpeg --disable-demuxer=smush --disable-demuxer=sol --disable-demuxer=thp --disable-demuxer=tiertexseq --disable-demuxer=tmv --disable-demuxer=tty --disable-demuxer=txd --disable-demuxer=vqf --disable-demuxer=wsaud --disable-demuxer=wsvqa --disable-demuxer=xa --disable-demuxer=xbin --disable-demuxer=yop --enable-demuxer=image2 --disable-demuxer=image2pipe --disable-demuxer=ingenient --disable-demuxer=image_bmp_pipe --disable-demuxer=image_dds_pipe --disable-demuxer=image_dpx_pipe --disable-demuxer=image_exr_pipe --disable-demuxer=image_j2k_pipe --disable-demuxer=image_jpegls_pipe --disable-demuxer=image_pictor_pipe --disable-demuxer=image_png_pipe --disable-demuxer=image_qdraw_pipe --disable-demuxer=image_sgi_pipe --disable-demuxer=image_sunrast_pipe --disable-demuxer=image_tiff_pipe --disable-demuxer=image_webp_pipe --disable-demuxer=image_jpeg_pipe --disable-filters --disable-protocol=data --disable-protocol=icecast --disable-protocol=md5 --disable-protocol=pipe --disable-protocol=unix --disable-mips32r2 --disable-mipsdsp --disable-mipsdspr2 --disable-mipsdsp --disable-indevs --disable-outdevs --enable-bzlib --disable-zlib --disable-bsfs --enable-libbluray --enable-protocol=bluray --enable-librtmp --pkg-config="pkg-config" --disable-debug --extra-cflags="-ffunction-sections -fdata-sections -fno-aggressive-loop-optimizations" --extra-ldflags="-Wl,--gc-sections,-lrt" --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --datadir=/usr/share/ffmpeg --enable-avdevice --enable-avfilter --disable-bzlib --disable-libfaac --disable-gpl --disable-libgsm --disable-indev=jack --disable-libvorbis --disable-lzma --disable-libmp3lame --enable-openssl --disable-libschroedinger --disable-libspeex --disable-libtheora --disable-vaapi --disable-libvpx --disable-x11grab --disable-libx264 --disable-outdev=xv' | ERROR: Function failed: do_configure (log file is located at /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/work/mips32el-oe-linux/ffmpeg/3.0.2-r2/temp/log.do_configure.10035) ERROR: Task 1253 (/home/openatvbuilder/openatv/build-enviroment/meta-oe-alliance/meta-oe/recipes-multimedia/ffmpeg/ffmpeg_3.0.2.bb, do_configure) failed with exit code '1' NOTE: Tasks Summary: Attempted 2357 tasks of which 2338 didn't need to be rerun and 1 failed.
Code:ERROR: enigma2-2.7+git-r26 do_configure: configure failed ERROR: enigma2-2.7+git-r26 do_configure: Function failed: do_configure (log file is located at /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/build/temp/log.do_configure.21528) ERROR: Logfile of failure stored in: /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/build/temp/log.do_configure.21528 Log data follows: | DEBUG: Executing python function sysroot_cleansstate | DEBUG: Python function sysroot_cleansstate finished | DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common'] | DEBUG: Executing shell function autotools_preconfigure | DEBUG: Shell function autotools_preconfigure finished | DEBUG: Executing python function autotools_copy_aclocals | WARNING: autotools: Unable to find task dependencies, -b being used? Pulling in all m4 files | DEBUG: SITE files ['endian-little', 'bit-32', 'mips-common', 'common-linux', 'common-glibc', 'mipsel-linux', 'common'] | DEBUG: Python function autotools_copy_aclocals finished | DEBUG: Executing shell function e2_copy_aclocal | DEBUG: Shell function e2_copy_aclocal finished | DEBUG: Executing shell function e2_copy_aclocal | DEBUG: Shell function e2_copy_aclocal finished | DEBUG: Executing shell function do_configure | automake (GNU automake) 1.15 | Copyright (C) 2014 Free Software Foundation, Inc. | License GPLv2+: GNU GPL version 2 or later <GNU General Public License v2.0 - GNU Project - Free Software Foundation> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Written by Tom Tromey <tromey@redhat.com> | and Alexandre Duret-Lutz <adl@gnu.org>. | AUTOV is 1 | NOTE: Executing ACLOCAL="aclocal --system-acdir=/home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/aclocal-copy/" autoreconf --verbose --install --force --exclude=autopoint -I /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/m4/ | autoreconf: Entering directory `.' | autoreconf: configure.ac: not using Gettext | autoreconf: running: aclocal --system-acdir=/home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/aclocal-copy/ -I /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/m4/ -I /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/m4/ --force -I m4 | autoreconf: configure.ac: tracing | autoreconf: running: libtoolize --copy --force | libtoolize: putting auxiliary files in '.'. | libtoolize: copying file './ltmain.sh' | libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. | libtoolize: copying file 'm4/libtool.m4' | libtoolize: copying file 'm4/ltoptions.m4' | libtoolize: copying file 'm4/ltsugar.m4' | libtoolize: copying file 'm4/ltversion.m4' | libtoolize: copying file 'm4/lt~obsolete.m4' | autoreconf: running: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/autoconf --include=/home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/m4/ --force | autoreconf: running: /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/autoheader --include=/home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/m4/ --force | autoreconf: running: automake --add-missing --copy --force-missing | configure.ac:9: installing './compile' | configure.ac:14: installing './config.guess' | configure.ac:14: installing './config.sub' | configure.ac:2: installing './install-sh' | configure.ac:2: installing './missing' | Makefile.am:6: installing './py-compile' | lib/timeshift/Makefile.inc:1: warning: pluginexec_PROGRAMS multiply defined in condition TRUE ... | lib/Makefile.am:36: 'lib/timeshift/Makefile.inc' included from here | lib/Makefile.am:21: ... 'pluginexec_PROGRAMS' previously defined here | lib/Makefile.am: installing './depcomp' | autoreconf: running: gnu-configize | autoreconf: Leaving directory `.' | NOTE: Running ./configure --build=x86_64-linux --host=mipsel-oe-linux --target=mipsel-oe-linux --prefix=/usr --exec_prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --libexecdir=/usr/libexec --datadir=/usr/share --sysconfdir=/etc --sharedstatedir=/com --localstatedir=/var --libdir=/usr/lib --includedir=/usr/include --oldincludedir=/usr/include --infodir=/usr/share/info --mandir=/usr/share/man --disable-silent-rules --disable-dependency-tracking --with-libtool-sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 BUILD_SYS=x86_64-linux HOST_SYS=mipsel-oe-linux STAGING_INCDIR=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00/usr/include STAGING_LIBDIR=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00/usr/lib --with-boxtype=et9x00 --with-machinebuild=et9x00 --with-libsdl=no --enable-dependency-tracking --with-gstversion=1.0 --with-textlcd | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/endian-little | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/mips-common | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/common-linux | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/common-glibc | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/mipsel-linux | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/openembedded-core/meta/site/common | configure: loading site script /home/openatvbuilder/openatv/build-enviroment/meta-openembedded/meta-oe/site/endian-little | checking for a BSD-compatible install... /usr/bin/install -c | checking whether build environment is sane... yes | checking for mipsel-oe-linux-strip... mipsel-oe-linux-strip | checking for a thread-safe mkdir -p... /bin/mkdir -p | checking for gawk... gawk | checking whether make sets $(MAKE)... yes | checking whether make supports nested variables... yes | checking how to create a pax tar archive... gnutar | checking whether make supports nested variables... (cached) yes | checking for style of include used by make... GNU | checking for mipsel-oe-linux-gcc... mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 | checking whether the C compiler works... yes | checking for C compiler default output file name... a.out | checking for suffix of executables... | checking whether we are cross compiling... yes | checking for suffix of object files... o | checking whether we are using the GNU C compiler... yes | checking whether mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 accepts -g... yes | checking for mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to accept ISO C89... none needed | checking whether mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 understands -c and -o together... yes | checking dependency style of mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00... gcc3 | checking how to run the C preprocessor... mipsel-oe-linux-gcc -E --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 -mel -mabi=32 -mhard-float -march=mips32 | checking for grep that handles long lines and -e... /bin/grep | checking for egrep... /bin/grep -E | checking for ANSI C header files... yes | checking for sys/types.h... yes | checking for sys/stat.h... yes | checking for stdlib.h... yes | checking for string.h... yes | checking for memory.h... yes | checking for strings.h... yes | checking for inttypes.h... yes | checking for stdint.h... yes | checking for unistd.h... yes | checking minix/config.h usability... no | checking minix/config.h presence... no | checking for minix/config.h... no | checking whether it is safe to define __EXTENSIONS__... yes | checking for special C compiler options needed for large files... no | checking for _FILE_OFFSET_BITS value needed for large files... 64 | checking for mipsel-oe-linux-gcc... (cached) mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 | checking whether we are using the GNU C compiler... (cached) yes | checking whether mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 accepts -g... (cached) yes | checking for mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to accept ISO C89... (cached) none needed | checking whether mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 understands -c and -o together... (cached) yes | checking dependency style of mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00... (cached) gcc3 | checking whether we are using the GNU C++ compiler... yes | checking whether mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 accepts -g... yes | checking dependency style of mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00... gcc3 | checking build system type... x86_64-pc-linux-gnu | checking host system type... mipsel-oe-linux-gnu | checking how to print strings... printf | checking for a sed that does not truncate output... (cached) sed | checking for fgrep... /bin/grep -F | checking for ld used by mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00... mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 | checking if the linker (mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 ) is GNU ld... yes | checking for BSD- or MS-compatible name lister (nm)... mipsel-oe-linux-nm | checking the name lister (mipsel-oe-linux-nm) interface... BSD nm | checking whether ln -s works... yes | checking the maximum length of command line arguments... 1572864 | checking how to convert x86_64-pc-linux-gnu file names to mipsel-oe-linux-gnu format... func_convert_file_noop | checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop | checking for mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to reload object files... -r | checking for mipsel-oe-linux-objdump... mipsel-oe-linux-objdump | checking how to recognize dependent libraries... pass_all | checking for mipsel-oe-linux-dlltool... no | checking for dlltool... no | checking how to associate runtime and link libraries... printf %s\n | checking for mipsel-oe-linux-ar... mipsel-oe-linux-ar | checking for archiver @FILE support... @ | checking for mipsel-oe-linux-strip... (cached) mipsel-oe-linux-strip | checking for mipsel-oe-linux-ranlib... mipsel-oe-linux-ranlib | checking command to parse mipsel-oe-linux-nm output from mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 object... ok | checking for sysroot... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 | checking for a working dd... /bin/dd | checking how to truncate binary pipes... /bin/dd bs=4096 count=1 | checking for mipsel-oe-linux-mt... no | checking for mt... mt | configure: WARNING: using cross tools not prefixed with host triplet | checking if mt is a manifest tool... no | checking for dlfcn.h... yes | checking for objdir... .libs | checking if mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 supports -fno-rtti -fno-exceptions... no | checking for mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to produce PIC... -fPIC -DPIC | checking if mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 PIC flag -fPIC -DPIC works... yes | checking if mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 static flag -static works... yes | checking if mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 supports -c -o file.o... yes | checking if mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 supports -c -o file.o... (cached) yes | checking whether the mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 linker (mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 ) supports shared libraries... yes | checking whether -lc should be explicitly linked in... no | checking dynamic linker characteristics... GNU/Linux ld.so | checking how to hardcode library paths into programs... immediate | checking whether stripping libraries is possible... yes | checking if libtool supports shared libraries... yes | checking whether to build shared libraries... yes | checking whether to build static libraries... yes | checking how to run the C++ preprocessor... mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 -E | checking for ld used by mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00... mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 | checking if the linker (mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 ) is GNU ld... yes | checking whether the mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 linker (mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 ) supports shared libraries... yes | checking for mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to produce PIC... -fPIC -DPIC | checking if mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 PIC flag -fPIC -DPIC works... yes | checking if mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 static flag -static works... yes | checking if mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 supports -c -o file.o... yes | checking if mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 supports -c -o file.o... (cached) yes | checking whether the mipsel-oe-linux-g++ -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 linker (mipsel-oe-linux-ld --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 ) supports shared libraries... yes | checking dynamic linker characteristics... (cached) GNU/Linux ld.so | checking how to hardcode library paths into programs... immediate | checking for mipsel-oe-linux-gcc -mel -mabi=32 -mhard-float -march=mips32 --sysroot=/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00 option to support OpenMP... -fopenmp | checking for msgfmt... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/msgfmt | checking for msginit... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/msginit | checking for msgmerge... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/msgmerge | checking for msguniq... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/msguniq | checking for xgettext... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/xgettext | checking for python... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/python-native/python | checking for python version... 2.7 | checking for python platform... linux2 | checking for python script directory... ${prefix}/lib/python2.7/site-packages | checking for python extension module directory... ${exec_prefix}/lib/python2.7/site-packages | checking for python2.7... (cached) /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/python-native/python | checking for a version of Python >= '2.1.0'... yes | checking for the distutils Python package... yes | checking for Python include path... -I/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00/usr/include/python2.7 | checking for Python library path... -L/home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/et9x00/usr/lib -lpython2.7 | checking for Python site-packages path... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/mipsel-oe-linux/usr/lib/python2.7/site-packages | checking python extra libraries... -lpthread -ldl -lutil | checking python extra linking flags... -Xlinker -export-dynamic | checking consistency of all components of python development environment... yes | checking for swig... /home/openatvbuilder/openatv/build-enviroment/builds/openatv/release/et9x00/tmp/sysroots/x86_64-linux/usr/bin/swig | checking for the pthreads library -lpthreads... no | checking whether pthreads work without any flags... no | checking whether pthreads work with -Kthread... no | checking whether pthreads work with -kthread... no | checking for the pthreads library -llthread... no | checking whether pthreads work with -pthread... yes | checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE | checking if more special flags are required for pthreads... no | checking ost/dmx.h usability... no | checking ost/dmx.h presence... no | checking for ost/dmx.h... no | checking linux/dvb/version.h usability... yes | checking linux/dvb/version.h presence... yes | checking for linux/dvb/version.h... yes | configure: found dvb version | configure: error: can't find dvb headers | NOTE: The following config.log files may provide further information. | WARNING: /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/build/temp/run.do_configure.21528:1 exit 1 from 'exit 1' | NOTE: /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/config.log | ERROR: configure failed | ERROR: Function failed: do_configure (log file is located at /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/build/temp/log.do_configure.21528) ERROR: Task 3 (/home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/enigma2.bb, do_configure) failed with exit code '1' NOTE: Tasks Summary: Attempted 4 tasks of which 0 didn't need to be rerun and 1 failed. No currently running tasks (4 of 5) Summary: 1 task failed: /home/openatvbuilder/openatv/build-enviroment/GITlocal/enigma2/enigma2.bb, do_configure Summary: There were 3 WARNING messages shown. Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
-
27.05.2016, 16:59 #306rantanplanGast
liegt wohl eher an der rtmp, da stand auch schon mal was mit Versuch der höheren Versionsnummer im git.
Also pr 7 statt 6.
Ist aber dann auch wohl eher Glückssache.
-
27.05.2016, 23:11 #307
- Registriert seit
- 08.06.2014
- Beiträge
- 2.601
- Thanks (gegeben)
- 778
- Thanks (bekommen)
- 1500
- Total Downloaded
- 22,11 MB
- Total Downloaded
- 22,11 MB
Was kann ich machen damit es wieder funktioniert? Hab mich damit noch nie wirklich befasst. Vor vielen Monaten hab das mal getestet und es hatte fast auf Anhieb funktioniert - nun leider nicht mehr. Dummerweise bräuchte ich es jetzt um was zu testen...
-
27.05.2016, 23:18 #308
- Registriert seit
- 05.04.2013
- Beiträge
- 481
- Thanks (gegeben)
- 1409
- Thanks (bekommen)
- 3257
- Total Downloaded
- 295,50 MB
- Total Downloaded
- 295,50 MB
Box 1:AX HD51erstmal würde ich den "build" ordner löschen.
Du kannst niemals alle mit deinem Tun begeistern. Selbst wenn du übers Wasser laufen kannst, kommt einer daher und fragt, ob du zu blöd zum Schwimmen bist.[/CENTER]
-
28.05.2016, 00:14 #309
- Registriert seit
- 08.06.2014
- Beiträge
- 2.601
- Thanks (gegeben)
- 778
- Thanks (bekommen)
- 1500
- Total Downloaded
- 22,11 MB
- Total Downloaded
- 22,11 MB
Hatte ich heute schon probiert, leider kommt der Fehler mit ffmpeg wieder ...
-
28.05.2016, 12:58 #310
- Registriert seit
- 08.06.2014
- Beiträge
- 2.601
- Thanks (gegeben)
- 778
- Thanks (bekommen)
- 1500
- Total Downloaded
- 22,11 MB
- Total Downloaded
- 22,11 MB
So, heute noch einmal getestet. Branch 3.4 bricht ab mit dem ffmpeg Fehler, 3.3 bricht ab mit einem xmltvimport Fehler und 3.2 läuft Problemlos durch.
Muss ich lokal noch etwas einstellen was sich zu 3.2 geändert hat? Kann doch nicht sein das es nicht klappen will
Lesezeichen