Ergebnis 71 bis 80 von 358
Thema: Online flashen openATV Image
-
21.11.2013, 13:41 #71
- Registriert seit
- 06.04.2013
- Ort
- FFM
- Beiträge
- 143
- Thanks (gegeben)
- 68
- Thanks (bekommen)
- 6
- Total Downloaded
- 14,43 MB
- Total Downloaded
- 14,43 MB
Box 1:Venton hd3Box 2:Vizyon 820hdBox 3:IPBOX99hdBox 4:IPBOX55hdBox 5:Dreambox 5620Sheute erst getestet und sieht gut aus
-
Advertising
-
13.03.2014, 11:01 #72
- Registriert seit
- 17.09.2013
- Beiträge
- 14
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 1
- Total Downloaded
- 663,80 MB
- Total Downloaded
- 663,80 MB
Box 1:VU+ DUO²Box 2:Venton Unibox HD2Box 3:Venton Unibox HD1Box 4:Venton Unibox HD1plusMuss man noch etwas einstellen? Da bei mir keine Online Image angezeigt wird. Auch wenn ich auf ATV 3.0 bleibt die Liste leer. Installiertes Image (ATV 4.0) ist vom Anfang der Woche.
-
13.03.2014, 11:03 #73
- Registriert seit
- 07.04.2013
- Ort
- OpenATV - Wien
- Beiträge
- 153
- Thanks (gegeben)
- 3636
- Thanks (bekommen)
- 3542
- Total Downloaded
- 51,16 MB
- Total Downloaded
- 51,16 MB
evtl. mal blau drücken bei der Imageauswahl, vielleicht ist bei dir noch 3.0 default
-
13.03.2014, 11:11 #74
- Registriert seit
- 17.09.2013
- Beiträge
- 14
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 1
- Total Downloaded
- 663,80 MB
- Total Downloaded
- 663,80 MB
Box 1:VU+ DUO²Box 2:Venton Unibox HD2Box 3:Venton Unibox HD1Box 4:Venton Unibox HD1plusDas habe ich schon probiert. Bleibt auch leer.
-
13.03.2014, 11:16 #75
- Registriert seit
- 07.04.2013
- Ort
- OpenATV - Wien
- Beiträge
- 153
- Thanks (gegeben)
- 3636
- Thanks (bekommen)
- 3542
- Total Downloaded
- 51,16 MB
- Total Downloaded
- 51,16 MB
Was für eine Box hast Du? Kannst du bitte auch gleich in dein Profil schreiben, erleichtert den support
-
Danke - 1 ThanksDanjel4u bedankten sich
-
13.03.2014, 11:18 #76
- Registriert seit
- 17.09.2013
- Beiträge
- 14
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 1
- Total Downloaded
- 663,80 MB
- Total Downloaded
- 663,80 MB
Box 1:VU+ DUO²Box 2:Venton Unibox HD2Box 3:Venton Unibox HD1Box 4:Venton Unibox HD1plusHier geht es um den Venton Unibox HD3
-
Danke - 1 ThanksThomas4711 bedankten sich
-
13.03.2014, 11:23 #77
-
Danke - 1 ThanksDanjel4u bedankten sich
-
22.04.2015, 12:46 #78
- Registriert seit
- 01.12.2014
- Beiträge
- 49
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:GigaBlue UHD QUAD 4KIch muss mal diesen Thread bemühen.
ich kann einfach kein aktuelles Image flashen. Meine Geräte siehe Signatur. Alles, also auch Aufnahmen, laufen über die NAS, welche problemlos gemounted wird.
Ich wollte heute, da die Updatefunktion mich auf mein "veraltetes Image" (Open ATV 4.2) hinwies, das neueste Image von heute flashen, wie es in der Online Flashfunktion angeboten wird.
Das Image wurde problemlos geladen und in /media/hdd/images/ gezippt abgelegt, zum flashen wurde es dann unzippt und im Unterordner /tmp abgelegt.
Leider erhalte ich die Fehlermeldung error remounting root, die Box muss dann neu gestartet werden und läuft danach problemlos im alten Image weiter.
Nach Hinweisen hier aus anderen Threads habe ich per Telnet nachgeschaut. Die Flash-Simulation (ofgwrite -n usw) läuft problemlos. Versuche ich per Telnet "echt" zu flashen, kommt ganz unten folgende Fehlermeldung:
Code:Welcome to openATV for gbquadplus openatv 4.2 gbquadplus gbquadplus login: root root@gbquadplus:~# ofgwrite -r -k /media/hdd/images/tmp ofgwrite Utility v2.1.0 Author: Betacentauri Based upon: mtd-utils-native-1.5.1 Use at your own risk! Make always a backup before use! Don't use it if you use multiple ubi volumes in ubi layer! Searching image files in /media/hdd/images/tmp Found kernel file: /media/hdd/images/tmp/kernel.bin Found rootfs file: /media/hdd/images/tmp/rootfs.bin Found /proc/mtd entries: Device: Size: Erasesize: Name: Image: mtd0: 1ee00000 00020000 "rootfs" -> /media/hdd/images/tmp/ro otfs.bin mtd1: 1ee00000 00020000 "rootfs(redundant)" mtd2: 00700000 00020000 "kernel" -> /media/hdd/images/tmp/ke rnel.bin mtd3: 00100000 00020000 "mac" Using kernel mtd device: /dev/mtd2 Using rootfs mtd device: /dev/mtd0 Found UBIFS Found NAND flash Erasing kernel: flash_erase /dev/mtd2 0 0 Erasing 128 Kibyte @ 6e0000 -- 100 % complete Flashing kernel: nandwrite -pm /dev/mtd2 /media/hdd/images/tmp/kernel.bin Writing data to block 0 at offset 0x0 Writing data to block 1 at offset 0x20000 Writing data to block 2 at offset 0x40000 Writing data to block 3 at offset 0x60000 Writing data to block 4 at offset 0x80000 Writing data to block 5 at offset 0xa0000 Writing data to block 6 at offset 0xc0000 Writing data to block 7 at offset 0xe0000 Writing data to block 8 at offset 0x100000 Writing data to block 9 at offset 0x120000 Writing data to block 10 at offset 0x140000 Writing data to block 11 at offset 0x160000 Writing data to block 12 at offset 0x180000 Writing data to block 13 at offset 0x1a0000 Writing data to block 14 at offset 0x1c0000 Writing data to block 15 at offset 0x1e0000 Writing data to block 16 at offset 0x200000 Writing data to block 17 at offset 0x220000 Writing data to block 18 at offset 0x240000 Writing data to block 19 at offset 0x260000 Writing data to block 20 at offset 0x280000 Writing data to block 21 at offset 0x2a0000 Writing data to block 22 at offset 0x2c0000 Writing data to block 23 at offset 0x2e0000 Writing data to block 24 at offset 0x300000 Writing data to block 25 at offset 0x320000 Writing data to block 26 at offset 0x340000 Writing data to block 27 at offset 0x360000 Writing data to block 28 at offset 0x380000 Writing data to block 29 at offset 0x3a0000 Writing data to block 30 at offset 0x3c0000 Writing data to block 31 at offset 0x3e0000 Writing data to block 32 at offset 0x400000 Writing data to block 33 at offset 0x420000 Writing data to block 34 at offset 0x440000 Switching to user mode 2 killall: rpc.mountd: no process killed sh: /etc/init.d/softcam: No such file or directory killall: CCcam: no process killed killall: hddtemp: no process killed killall: transmission-daemon: no process killed killall: openvpn: no process killed Syncing filesystem Remounting rootfs read-only mount: mounting ubi0:rootfs on / failed: Device or resource busy Error remounting root! root@gbquadplus:~#
NAS 3TB gemounted (keine interne HDD)
-
22.04.2015, 13:01 #79
- Registriert seit
- 25.08.2013
- Ort
- openATV
- Beiträge
- 1.814
- Thanks (gegeben)
- 1393
- Thanks (bekommen)
- 706
- Total Downloaded
- 29,18 MB
- Total Downloaded
- 29,18 MB
Box 1:uniBOX HD 1 PLUSBox 2:VU+ ZeroBox 3:AX TriplexBox 4:MEGASAT Force 1 PlusBox 5:OS Mio 4K +@Limoges hast Du mal das NAS ganz abgeklemmt und dann geflasht?
Receiver I: OS Mio 4K +
Receiver II: Ax Triplex
Receiver III: VU+ Zero
Receiver IV: MEGASAT Force 1+
-
22.04.2015, 13:58 #80
- Registriert seit
- 01.12.2014
- Beiträge
- 49
- Thanks (gegeben)
- 2
- Thanks (bekommen)
- 3
- Total Downloaded
- 0
- Total Downloaded
- 0
Box 1:GigaBlue UHD QUAD 4KDann lässt er flashen gar nicht zu Fehlermeldung "Keine HDD angeschlossen" oder so ähnlich, wohlgemerkt auch nicht, wenn ich vom USB-Stick flashen will. Ich gehe auf "local" (gelbe Taste), normalerweise kann ich hier die Flashsource auswählen, aber so weit komme ich gar nicht erst. USB-Stick ist 4GB groß, daran sollte es nicht liegen, ausser dass er ggf. mit einer kleineren Blockgröße formatiert werden sollte, hat jedenfalls irgendwo gestanden.
NAS 3TB gemounted (keine interne HDD)
Lesezeichen