Thanks Thanks:  0
Ergebnis 1 bis 9 von 9
  1. #1
    Mitglied
    Registriert seit
    30.10.2013
    Beiträge
    63
    Thanks (gegeben)
    0
    Thanks (bekommen)
    8
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke

    Netzwerkstillstand beim Kopieren von Filmen auf NAS

    Hi.
    Wenn ich Filme auf eine NAS Freigabe (Samba) kopieren möchte, dann startet der Vorgang und bleibt dann aber schnell stehen. Dies äußert sich darin, dass ich die Box nicht mehr bedienen kann, undsie sogar nicht mehr anpingen kann. Erst ein Neustart der Box schafft da Abhilfe.
    Hat jemand auch solche Probleme?
    Oder weiß jemand einen Rat?

    Danke und Gruß
    beckersbester

    •   Alt Advertising

       

  2. #2
    Avatar von Owen Hart
    Registriert seit
    06.04.2013
    Beiträge
    635
    Thanks (gegeben)
    1439
    Thanks (bekommen)
    289
    Total Downloaded
    472,0 KB
    Total Downloaded
    472,0 KB
    ReceiverDanke
    kannst du das bitte mitloggen?

  3. #3
    Mitglied
    Registriert seit
    30.10.2013
    Beiträge
    63
    Thanks (gegeben)
    0
    Thanks (bekommen)
    8
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Wenn du mir sagst wie, dann versuche ich es.
    Wenn das passiert kann ich logischerweise nicht mehr auf die Box per SHH oder Telnet drauf.
    Welche Schritte muss ich also machen?

    Gruß
    beckersbester

  4. #4
    Avatar von Owen Hart
    Registriert seit
    06.04.2013
    Beiträge
    635
    Thanks (gegeben)
    1439
    Thanks (bekommen)
    289
    Total Downloaded
    472,0 KB
    Total Downloaded
    472,0 KB
    ReceiverDanke
    schau mal hier: http://www.opena.tv/howtos/1874-seri...=serial+loggen
    Da hat arn ne Anleitung zu gemacht. Einfach den Zeitpunkt mitloggen und alles in eine Datei speichern, welche du dann hier anhängen kannst. Die Spezialisten können dann eventuell mehr dazu sagen oder weiterhelfen.

  5. #5
    Mitglied
    Registriert seit
    30.10.2013
    Beiträge
    63
    Thanks (gegeben)
    0
    Thanks (bekommen)
    8
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Hallo nochmal.
    Ich habe leider keine Möglichkeit den Receiver seriell an meinen Mac anzuschließen.
    Dennoch habe ich noch heraus gefunden, dass das Problem nur beim kopieren/verschieben von Filmen von dem Receiver auf das NAS auftritt. Umgekehrt ist das kein Problem.
    Noch einmal genauer wie sich das Problem dann äußert:
    Den Receiver kann ich im LAN dann nicht mehr anpingen.
    Er nimmt keine Befehle per Fernbedienung mehr an.
    Das zu dem Zeitpunkt laufende Programm läuft weiter.

    Vielleicht hilft das ja noch etwas weiter.

    Gruß
    beckersbester

  6. #6
    Avatar von Thomas4711
    Registriert seit
    07.04.2013
    Ort
    OpenATV - Wien
    Beiträge
    153
    Thanks (gegeben)
    3636
    Thanks (bekommen)
    3542
    Total Downloaded
    51,16 MB
    Total Downloaded
    51,16 MB
    ReceiverDanke
    Du brauchst nicht seriell zu loggen, das geht auch übers Netzwerk.
    telnet
    init 2
    enigma2
    jetzt die problemaktion durchführen und danach log posten.

  7. #7
    Mitglied
    Registriert seit
    30.10.2013
    Beiträge
    63
    Thanks (gegeben)
    0
    Thanks (bekommen)
    8
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Hi.
    So habe das gemacht.
    telnet
    Init 2
    enigma2

    Dann das Kopieren angestoßen.

    Das ist der Log:

    Code:
    roger-mac:~ stefan$ telnet 192.168.178.201
    Trying 192.168.178.201...
    Connected to optimussos2.fritz.box.
    Escape character is '^]'.
    
    
    Welcome to openATV for Wohnzimmer
    openatv 4.1 Wohnzimmer
    
    
    Wohnzimmer login: root
    root@Wohnzimmer:~# init 2
    root@Wohnzimmer:~# enigma2
    PYTHONPATH: /usr/lib/enigma2/python
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    10800k video mem
     - double buffering available!
    3600kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    + (9) gLCDDC
    found OLED display!
    lcd buffer 0x7a2390 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    + (21) input device driver
    Input device "OPTIMUSS OS2 remote control (native)" is a remotecontrol
    Found 1 input devices.
    + (22) Hdmi CEC driver
    eHdmiCEC: detected physical address change: 1000 --> 2000
    eHdmiCEC: send message 84 20 00 03 
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    cannot open /proc/stb/tsmux/input2
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    done, found 1 common interface slots
    + (35) CA handler
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryHDMI
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    + (41) Stream server
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 116 channels/transponders and 1658 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    opening frontend 1
    close frontend 1
    found 1 adapter, 2 frontends(2 sim) and 5 demux, boxtype 1
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait7.png
    found 6 spinner!
    executing main
    setIoPrio best-effort level 3 ok
    couldn't open /proc/stb/misc/12V_output
    [Harddisk] enumerating block devices...
    new Harddisk sda -> /dev/sda -> /dev/sda
    main thread is non-idle! display spinner!
    [Harddisk] enumerating network mounts...
    new Network Mount TVMEDIEN -> /media/net/TVMEDIEN
    new Network Mount videoMEDIEN -> /media/net/videoMEDIEN
    new Network Mount musicMEDIEN -> /media/net/musicMEDIEN
    Reading satellites.xml
    MATRIX
    LNB
    MATRIX
    LNB
    removing internal link on frontend id 1
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    setSlotInfo for dvb frontend 1 to slotid 1, descr BCM7335 (internal), need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: advanced
    add 192 to 1
    unicable mode switch function coming soon
    slot: 1 configmode: advanced
    link tuner 1 to tuner 0
    setting internal link on frontend id 1
    add 192 to 1
    unicable mode switch function coming soon
    sec config completed
    [NimManager] slot name=BCM7335 (internal)
    [NimManager] multiType = True
    [NimManager] slot name=BCM7335 (internal)
    [NimManager] multiType = True
    [Picon] adding path: /usr/share/enigma2/picon/
    [Time By]: Transponder
    [EPGC] time updated.. but cache file not set yet.. dont start epg!!
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00_templates.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00a_InfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00b_SecondInfoBar.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00c_SecondInfoBarECM.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00d_InfoBarLite.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00e_ChannelSelection.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00f_MoviePlayer.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_00g_EMC.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_01_openatv.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_02_display.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_03_plugins.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_04_check.xml
    [SKIN] loading include: /usr/share/enigma2/MetrixHD/skin_05_screens_unchecked.xml
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (Regular)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/OpenSans-Regular.ttf...OK (RegularLight)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/setrixHD.ttf...OK (SetrixHD)
    [FONT] adding font /usr/share/enigma2/MetrixHD/fonts/meteocons.ttf...OK (Meteo)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language Deutsch
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [VideoMode] setting scaler_sharpness to: 0000000D
    [VideoMode] setMode - port: HDMI, mode: 1080i, rate: 60Hz
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    [EPGC] 10228 events read from /etc/enigma2/epg.dat
    setLCDBrightness 25
    setLCDBrightness 127
    setLCDScrollspeed 150
    setLCDRepeat 3
    setLCDMode 1
    Setting OSD position: 0 720 0 576
    Setting OSD alpha: 255
    Setting 3D mode: auto
    Setting 3D depth: 50
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    [Ipkg] Added to OPKG destinations: /
    [Info-Panel] machinebrand: Edision
    [Info-Panel] machinename: Optimuss OS2
    [Info-Panel] oem name: dags
    [Info-Panel] boxtype: optimussos2
    Plugin  Extensions/WebInterface failed to load: No module named plugin
    No 'mechanize' module
    [MyTube] MyTubePlayerService - init
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting splitmode to: off
    --> setting sharpness to: 00000000
    --> setting auto_flesh to: 00000000
    --> setting green_boost to: 00000000
    --> setting blue_boost to: 00000000
    --> setting dynamic_contrast to: 00000000
    --> setting color_soace to: Edid(Auto)
    --> applying pep values
    command ['umount -fl /media/net/TVMEDIEN', 'sleep 2', 'mount //192.168.178.203/TV']
    eHdmiCEC: send message 7D 
    eHdmiCEC: send message 7D 
    [AutoTimer] Auto Poll Enabled
    [CI_Assignment] activating ci configs:
    [CI_Activate] FOUND 1 CI Slots 
    [CI_Activate_Config_CI0] no config file found
    [CI_Activate_Config_CI0] error parsing xml...
    starting hotplug handler
    [Timer] Record RecordTimerEntry(name=Cowboys & Aliens, begin=Mon Jul  7 00:17:10 2014, serviceref=1:0:1:445D:453:1:C00000:0:0:0:, justplay=0, isAutoTimer=0)
    [Timer] Record RecordTimerEntry(name=Die Sendung mit der Maus, begin=Sun Jul 13 11:22:00 2014, serviceref=1:0:19:2B98:3F2:1:C00000:0:0:0:, justplay=0, isAutoTimer=1)
    [Timer] Record RecordTimerEntry(name=Die Sendung mit der Maus, begin=Sun Jul 20 11:22:00 2014, serviceref=1:0:19:2B98:3F2:1:C00000:0:0:0:, justplay=0, isAutoTimer=1)
    wasTimerWakeup failed!
    ==================================================================================
    [NAVIGATION] getNextRecordingTime= 1405243300
    [NAVIGATION] nextRecordTimerAfterEventActionAuto= True
    [NAVIGATION] current Time=1404751151.98
    [NAVIGATION] timediff=492148.023365
    ==================================================================================
    [NAVIGATION] getNextPowerManagerTime= -1
    [NAVIGATION] nextPowerManagerAfterEventActionAuto= False
    [NAVIGATION] current Time=1404751151.98
    [NAVIGATION] timediff=1404751152.98
    ==================================================================================
    [NAVIGATION] wasTimerWakeup = False
    EVIOCGRAB: Device or resource busy
    Removed  /tmp/.sock.hbbtv.url
    killall: hbbtv.app: no process killed
    [SKIN] Parsing embedded skin <embedded-in-'HbbTVHelper'>
    [SCREENNAME]  ['HbbTVHelper_summary', 'SimpleSummary']
    [SCREENNAME]  HbbTVHelper
    Setvolume: 100 100 (raw)
    Setvolume: 0 0 (-1db)
    EMC: +++ EMC V3.7.4beta20131015 startup
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Mo 07 Jul 2014 18:39:12 CEST
    [(100, <class 'Screens.InfoBar.InfoBar'>)]
    warning, skin is missing element epg_description in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    warning, skin is missing element channel in <class 'Screens.InfoBarGenerics.SecondInfoBar'>
    [Skin] Attribute not implemented: valign value: center
    [SCREENNAME]  RdsInfoDisplaySummary
    warning, skin is missing element From in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'>
    warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'>
    warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'>
    warning, skin is missing element Tuner in <class 'Screens.Dish.Dish'>
    warning, skin is missing element PTSSeekPointer in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element statusicon in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element eventname in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element PTSSeekBack in <class 'Screens.PVRState.TimeshiftState'>
    warning, skin is missing element speed in <class 'Screens.PVRState.TimeshiftState'>
    RemovePopup, id = ZapError
    [Errno 6] No such device or address: '/tmp/.sock.hbbtv.cmd'
    No found pipe!!
    [SCREENNAME]  RdsInfoDisplay
    [SCREENNAME]  InfoBarSummary
    [SCREENNAME]  InfoBar
    setValue 70
    Setvolume: 70 70 (raw)
    Setvolume: 19 19 (-1db)
    lastshutdown=False              (True = last shutdown was OK)
    NOK shutdown action=normal
    bootup action=normal
    [LogManager] Trim Poll Started
    [LogManager] Trash Poll Started
    [LogManager] probing folders
    [LogManager] found following log's: ['/home/root/logs']
    [LogManager] looking in: /home/root/logs
    [LogManager] /home/root/logs: bytesToRemove -10468053
    [NTP]: setting E2 time: 1404751159.0
    [CAMSTARTER] No Cam to Start, Exit
    playing 1:0:1:2F1C:441:1:C00000:0:0:0:
    [SCREENNAME]  InfoBar
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    RemovePopup, id = ZapError
    allocate channel.. 0441:0001
    opening frontend 0
    (0)tune
    RotorCmd ffffffff, lastRotorCmd ffffffff
    prepare_sat System 0 Freq 12187500 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
    tuning to 1076 mhz
    OURSTATE: tuning
    allocate Channel: res 0
    [eDVBCIInterfaces] addPMTHandler 1:0:1:2F1C:441:1:C00000:0:0:0:
    allocate demux
    EMC: Setting EPG language: de_DE
    [VLC] Checking for buildin servicets ...  no
    [VLC] Checking for existing and usable servicets.so ...  No module named servicets
    [VLC] Checking for usable gstreamer service ...  yes
    EMC: Next trashcan cleanup in 381 minutes
    eHdmiCEC: received message 7E 00 
    eHdmiCec: volume forwarding to device 00 enabled
    CI Slot 0: reset requested
    ci flush
    ci inserted in slot 0
    poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 38(16)
    [eBatch] retval=0, cmds left=2, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 47(16)
    job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
    [SEC] set static current limiting
    0.0.0.0
    192.168
    ER plugin not found
    [OpenWebif] no plugins to load
    [OpenWebif] started on 80
    [OpenWebif] started on 443
    poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
    [SEC] invalidate current switch params
    [SEC] setVoltage 1
    [SEC] sleep 200ms
    [SEC] setVoltage 2
    [SEC] setTone 0
    [SEC] sleep 75ms
    [SEC] sendDiseqc: e0105a0d3c(?)
    [SEC] sleep 100ms
    [SEC] setVoltage 1
    [SEC] update current switch params
    [SEC] startTuneTimeout 5000
    [SEC] setFrontend 1
    setting frontend 0
    (0)fe event: status 0, inversion off, m_tuning 1
    (0)fe event: status 19, inversion off, m_tuning 2
    OURSTATE: ok
    [eDVBLocalTimerHandler] channel 0x2ad6fd0 running
    [eEPGCache] channel 0x2ad6fd0 running
    [EPGC] next update in 2 sec
    stop release channel timer
    ok ... now we start!!
    eventNewProgramInfo 0 0
    have 1 video stream(s) (00a7), and 1 audio stream(s) (0088), and the pcr pid is 00a7, and the text pid is 0047
    allocate demux
    TuxTxt cache cleared
    decoder state: play, vpid=167, apid=136
    DMX_SET_PES_FILTER(0xa7) - pcr - ok
    DEMUX_START - pcr - ok
    DMX_SET_PES_FILTER(0x88) - audio - ok
    DEMUX_START - audio - ok
    AUDIO_SET_BYPASS(1) - ok
    AUDIO_PAUSE - ok
    AUDIO_PLAY - ok
    Video Device: /dev/dvb/adapter0/video0
    demux device: /dev/dvb/adapter0/demux0
    VIDEO_SET_STREAMTYPE 0 - ok
    DMX_SET_PES_FILTER(0xa7) - video - ok
    DEMUX_START - video - ok
    VIDEO_FREEZE - ok
    VIDEO_PLAY - ok
    DMX_SET_PES_FILTER(0x47) - ttx - ok
    DEMUX_START - ttx - ok
    TuxTxt cache cleared
    TuxTxt: initialized
    TuxTxt service started 47
    VIDEO_SLOWMOTION(0) - ok
    VIDEO_FAST_FORWARD(0) - ok
    VIDEO_CONTINUE - TuxTxt running thread...(047)
    ok
    AUDIO_CONTINUE - [EPGC] start caching events(1404751163)
    ok
    AUDIO_CHANNEL_SELECT(0) - ok
    disable teletext subtitles page ffffffffffffffff (und)
    setPixmapNum(0) failed! defined pixmaps: []
    setPixmapNum(0) failed! defined pixmaps: []
    Send OK!! : OP_HBBTV_UNLOAD_AIT
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 70
    [Volume Adjust] load xml...
    [Volume Adjust] New Channel
    [Volume Adjust] oldvol = 0
    [eDVBCAService] new service 1:0:1:2F1C:441:1:C00000:0:0:0:
    [eDVBCAService] add demux 0 to slot 0 service 1:0:1:2F1C:441:1:C00000:0:0:0:
    RemovePopup, id = ZapError
    main thread is non-idle! display spinner!
    [SEC] sleep 500ms
    EMC delPathFromCache /hdd/movie/trashcan
    EMC: [EMCMS] trashcan cleanup: nothing to delete...
    [eBatch] retval=0, cmds left=1, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
    VIDEO_GET_EVENT - ok
    PATready
    use pmtpid 002f for service_id 2f1c
    [Dish] tuning failed
    [SEC] set dynamic current limiting
    [eBatch] retval=0, cmds left=0, data:
    
    
    command ['umount -fl /media/net/musicMEDIEN', 'sleep 2', 'mount //192.168.178.203/music']
    eventNewProgramInfo 0 0
    have 1 video stream(s) (00a7), and 1 audio stream(s) (0088), and the pcr pid is 00a7, and the text pid is 0047
    decoder state: play, vpid=167, apid=136
    Send OK!! : OP_HBBTV_UNLOAD_AIT
    [Volume Adjust] Update Info
    [Volume Adjust] Volume = 70
    [Volume Adjust] load xml...
    [eDVBCIInterfaces] gotPMT
    poll: unhandled POLLERR/HUP/NVAL for fd 59(16)
    poll: unhandled POLLERR/HUP/NVAL for fd 64(16)
    [VideoMode] setting aspect: 16:9
    [VideoMode] setting wss: auto
    [VideoMode] setting policy: panscan
    [VideoMode] setting policy2: letterbox
    [eBatch] retval=0, cmds left=2, data:
    
    
    AITready
    Set Channel Info >> sid : 0, onid : 0, tsid : 0, name : , orgid : 0 
    Name  : Comedy
    URL   : Clipfish Comedy
    OrgID : 33
    AppID : 207
    Control Code : 2
    Profile Code : 0
    
    
    Name  : VOX Specials
    URL   : HbbTV Specials
    OrgID : 33
    AppID : 206
    Control Code : 2
    Profile Code : 0
    
    
    Name  : Digitaltext
    URL   : VOX-Digitaltext
    OrgID : 33
    AppID : 205
    Control Code : 2
    Profile Code : 0
    
    
    Name  : Clipfish
    URL   : FEHLER
    OrgID : 33
    AppID : 203
    Control Code : 2
    Profile Code : 0
    
    
    Name  : Kochbar
    URL   : Kochbar HbbTV
    OrgID : 33
    AppID : 204
    Control Code : 2
    Profile Code : 0
    
    
    Name  : Start
    URL   : VOX-Digitaltext
    OrgID : 33
    AppID : 200
    Control Code : 1
    Profile Code : 0
    
    
    Name  : Yoga+Fitness
    URL   : wonderwoman
    OrgID : 33
    AppID : 208
    Control Code : 2
    Profile Code : 0
    
    
    Name  : Dooloop
    URL   : dooloop
    OrgID : 33
    AppID : 210
    Control Code : 2
    Profile Code : 0
    
    
    Name  : NOW o
    URL   : NOW Application
    OrgID : 33
    AppID : 221
    Control Code : 2
    Profile Code : 0
    
    
    Name  : NOW i
    URL   : NOW Application
    OrgID : 33
    AppID : 220
    Control Code : 2
    Profile Code : 0
    
    
    Name  : NOW i2
    URL   : http://hbbtv.voxnow.de/hbbtv2/index.php
    OrgID : 33
    AppID : 226
    Control Code : 2
    Profile Code : 0
    
    
    Set Channel Info >> sid : 2F1C, onid : 1, tsid : 441, name : VOX, orgid : 33 
    ERROR reading PES (fd=57) - Value too large for defined data type
    poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
    [eBatch] retval=0, cmds left=1, data:
    
    
    [eDVBLocalTimerHandler] diff is -250
    [eDVBLocalTimerHandler] no correction found... store calced correction(250)
    [eDVBLocalTimerHandler] not changed
    sdt update done!
    poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
    [eBatch] retval=0, cmds left=0, data:
    
    
    command ['umount -fl /media/net/videoMEDIEN', 'sleep 2', 'mount //192.168.178.203/video']
    poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
    [eBatch] retval=0, cmds left=2, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
    setPixmapNum(0) failed! defined pixmaps: []
    Start timeshift!
    recording to /media/hdd/timeshift/timeshift.3wwFTx
    setIoPrio realtime level 7 ok
    [eFilePushThreadRecorder] THREAD START
    [EITSave] query epg event id 8056, 1:0:1:2F1C:441:1:C00000:0:0:0:
    [EITSave] found event.. store to disc
    eDVBServicePlay::unpause
    setPixmapNum(0) failed! defined pixmaps: []
    [eBatch] retval=0, cmds left=1, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 62(16)
    [EPGC] abort non avail nownext reading
    [EPGC] abort non avail schedule reading
    [EPGC] abort non avail virgin nownext reading
    [EPGC] abort non avail virgin schedule reading
    [EPGC] abort non avail netmed schedule reading
    [EPGC] abort non avail netmed schedule other reading
    [EPGC] abort non avail FreeSat schedule_other reading
    [EPGC] abort non avail viasat reading
    [eBatch] retval=0, cmds left=0, data:
    
    
    poll: unhandled POLLERR/HUP/NVAL for fd 67(16)
    eHdmiCEC: received message 84 00 00 00 
    eHdmiCEC: received message 87 08 00 46 
    eHdmiCEC: received message 80 00 00 20 00 
    eHdmiCEC: received message A0 08 00 46 00 04 00 01 
    eHdmiCEC: received message A0 08 00 46 00 08 00 00 
    eHdmiCEC: received message 46 
    eHdmiCEC: send message 47 57 6F 68 6E 7A 69 6D 6D 65 72 
    eHdmiCEC: received message 8C 
    eHdmiCEC: send message 87 00 00 00 
    eHdmiCEC: received message 84 10 00 05 
    eHdmiCEC: received message 84 10 00 04 
    eHdmiCEC: received message 72 01 
    eHdmiCec: volume forwarding to device 05 enabled
    eHdmiCEC: received message A0 08 00 46 00 08 00 00 
    eHdmiCEC: received message 85 
    eHdmiCEC: send message 82 20 00 
    eHdmiCEC: received message 46 
    eHdmiCEC: send message 47 57 6F 68 6E 7A 69 6D 6D 65 72 
    eHdmiCEC: received message A0 08 00 46 00 08 00 00 
    eHdmiCEC: received message 87 08 00 46 
    eHdmiCEC: received message 87 08 00 46 
    eHdmiCEC: received message 8C 
    eHdmiCEC: send message 87 00 00 00 
    eHdmiCEC: received message 72 01 
    eHdmiCec: volume forwarding to device 05 enabled
    eHdmiCEC: received message 
    1 189 1
    KEY: 393 PVR
    0 189 1
    KEY: 393 PVR
    action ->  InfobarActions showMovies
    [TIMER] Filename calculated as: '/media/net/musicMEDIEN/20140713 1122 - KiKA HD - Die Sendung mit der Maus'
    [TIMER] Filename calculated as: '/media/net/musicMEDIEN/20140720 1122 - KiKA HD - Die Sendung mit der Maus'
    warning, skin is missing element CoverBg in <class 'Plugins.Extensions.EnhancedMovieCenter.MovieSelection.EMCSelection'>
    warning, skin is missing element Cover in <class 'Plugins.Extensions.EnhancedMovieCenter.MovieSelection.EMCSelection'>
    warning, skin is missing element Video in <class 'Plugins.Extensions.EnhancedMovieCenter.MovieSelection.EMCSelection'>
    [SCREENNAME]  ['EMCSelection_summary', 'SimpleSummary']
    [SCREENNAME]  EMCSelection
    ignore request to play already running service(1)
    EMC: resetInfo
    EMC: [EMC] LOAD PATH:
    /hdd/movie
    EMC: [spNET] IP = 192.168.178.201
    EMC addPathToCache /hdd/movie
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    EMC: resetInfo
    EMC ret initCursor movetop correct ????
    EMC: resetInfo
    EMC: resetInfo
    ERROR reading PES (fd=57) - Value too large for defined data type
    poll: unhandled POLLERR/HUP/NVAL for fd 57(8)
    eHdmiCEC: received message 
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    1 160 1
    KEY: 352 OK
    action ->  PluginMovieSelectionActions EMCOK
    EMC: resetInfo
    EMC: [EMC] LOAD PATH:
    /hdd/movie/_Medien
    EMC addPathToCache /hdd/movie/_Medien
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    EMC: resetInfo
    EMC ret initCursor movetop correct ????
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    0 160 1
    KEY: 352 OK
    1 160 1
    KEY: 352 OK
    action ->  PluginMovieSelectionActions EMCOK
    [EMC] service valid= 1
    EMC ret chnSer 4097:0:44:45:0:0:0:0:0:0:/hdd/movie/_Medien
    EMC: resetInfo
    EMC: [EMC] LOAD PATH:
    /hdd/movie
    EMC addPathToCache /hdd/movie
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    [EMC] service valid= 1
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    0 160 1
    KEY: 352 OK
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    loading streaminfo for /hdd/movie/20140707 0017 - ProSieben - Cowboys & Aliens.ts
    [@ML] m_streaminfo.getLastFrame returned 125208, 6068046109 (67422s), fixup to: 125208, 15190 (0s)
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    loading streaminfo for /hdd/movie/20140706 2237 - ProSieben - Underworld_ Awakening.ts
    [@ML] m_streaminfo.getLastFrame returned 309448, 5530551709 (61450s), fixup to: 309448, 28846 (0s)
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    loading streaminfo for /hdd/movie/20140706 2007 - Das Erste HD - Polizeiruf 110_ Abwärts.ts
    [@ML] m_streaminfo.getLastFrame returned 442364, 1021627397 (11351s), fixup to: 442364, 37081 (0s)
    eHdmiCEC: received message 
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    1 6c 1
    KEY: 108 DOWN
    action ->  PluginMovieSelectionActions EMCDown
    EMC: resetInfo
    0 6c 1
    KEY: 108 DOWN
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    1 8b 1
    KEY: 139 MENU
    0 8b 1
    KEY: 139 MENU
    action ->  PluginMovieSelectionActions EMCMENU
    [SKIN] Parsing embedded skin <embedded-in-'MovieMenu'>
    [SCREENNAME]  ['MovieMenu_summary', 'SimpleSummary']
    [SCREENNAME]  MovieMenu
    1 6a 1
    KEY: 106 RIGHT
    0 6a 1
    KEY: 106 RIGHT
    1 67 1
    KEY: 103 UP
    0 67 1
    KEY: 103 UP
    1 67 1
    KEY: 103 UP
    0 67 1
    KEY: 103 UP
    1 6c 1
    KEY: 108 DOWN
    0 6c 1
    KEY: 108 DOWN
    1 160 1
    KEY: 352 OK
    action ->  OkCancelActions ok
    [SCREENNAME]  ['EMCSelection_summary', 'SimpleSummary']
    0 160 1
    KEY: 352 OK
    [SCREENNAME]  EMCSelection
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    warning, skin is missing element blue in <class 'Screens.LocationBox.LocationBox'>(Verzeichnis wählen)
    warning, skin is missing element yellow in <class 'Screens.LocationBox.LocationBox'>(Verzeichnis wählen)
    warning, skin is missing element green in <class 'Screens.LocationBox.LocationBox'>(Verzeichnis wählen)
    warning, skin is missing element red in <class 'Screens.LocationBox.LocationBox'>(Verzeichnis wählen)
    [SCREENNAME]  ['LocationBox_summary', 'SimpleSummary']
    [SCREENNAME]  LocationBox
    EMC: [EMCMS] copyMovie
    1 192 1
    KEY: 402 BOUQUET+
    action ->  EPGSelectActions nextService
    0 192 1
    KEY: 402 BOUQUET+
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    eHdmiCEC: received message 
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    1 160 1
    KEY: 352 OK
    action ->  WizardActions ok
    0 160 1
    KEY: 352 OK
    1 6a 1
    KEY: 106 RIGHT
    action ->  WizardActions right
    unknown action WizardActions/right! typo in keymap?
    action ->  DirectionActions right
    0 6a 1
    KEY: 106 RIGHT
    1 6c 1
    KEY: 108 DOWN
    action ->  WizardActions down
    unknown action WizardActions/down! typo in keymap?
    action ->  DirectionActions down
    0 6c 1
    KEY: 108 DOWN
    1 18f 1
    KEY: 399 GREEN
    0 18f 1
    KEY: 399 GREEN
    action ->  ColorActions green
    [SCREENNAME]  ['EMCSelection_summary', 'SimpleSummary']
    [SCREENNAME]  EMCSelection
    EMC: resetInfo
    EMC: resetInfo
    EMC: resetInfo
    EMC ret exeFil 1:0:0:0:0:0:0:0:0:0:/hdd/movie/20140629 1122 - KiKA HD - Die Sendung mit der Maus.ts:Die Sendung mit der Maus
    EMC delPathFromCache /hdd/movie/_Medien/Testordner
    EMC delPathFromCache /hdd/movie
    EMC: [emcTasker] Run script
    EMC: [emcTasker] executing: 'touch /hdd/movie/_Medien/Testordner//owner_test;ls -l /hdd/movie/_Medien/Testordner//owner_test | while read flags i owner group crap;do chown $owner:$group "/hdd/movie/20140706 1122 - KiKA HD - Die Sendung mit der Maus."*;done;rm /hdd/movie/_Medien/Testordner//owner_test; cp "/hdd/movie/20140706 1122 - KiKA HD - Die Sendung mit der Maus."* "/hdd/movie/_Medien/Testordner//"'
    EMC: [EMCMS] cpDirSelected
    unicode U+   5 not present
    unicode U+   5 not present
    unicode U+   5 not present
    eHdmiCEC: received message
    Der Order _Medien im /hdd/movie ist ein Softlink auf /mnt/net/videoMEDIEN

    Ab da kann ich nichts mehr machen.
    Spontan würde ich sagen, man sieht nicht wirklich etwas daraus - aber ich bin ja auch kein Experte.

    Vielen Dank schon mal.

    Gruß
    beckersbester
    Geändert von Thomas4711 (07.07.2014 um 22:02 Uhr) Grund: In CODE gesetzt

  8. #8
    Avatar von Papi2000
    Registriert seit
    20.04.2013
    Beiträge
    24.824
    Thanks (gegeben)
    4679
    Thanks (bekommen)
    9077
    Total Downloaded
    596,61 MB
    Total Downloaded
    596,61 MB
    ReceiverDanke
    Box 1:
    GB Q4K-SC / UE4K-SC / UE4K-C
     
     
    Box 2:
    GigaBlue Q-SSC / Q+-SSC
     
     
    Box 3:
    DM900uhd-SS / Vu+Duo
     
     
    Box 4:
    ZGemma H7/H9 SF8008
     
     
    Box 5:
    diverse andere . . .
     
     
    Ich würde mal dringend die Mounts checken.
    Wie sind die angelegt (auf dem Server), gemountet (auf der Box)?
    Grüßle
    Ralf
    ---------------------------------------------
    Gigablue Quad4K-mixed, UE4K, Trio4K, Quad_Plus-SSC, UE_Plus-SC, X2/X3-SC, UltraUE-SC, ...
    Astra 19.2E UniCable & KabelBW, oATV/teamBlue
    (u.a.: DM900uhd,Vu+Duo,ZGemma H9Twin & H7S), PC-DVB-S/C/T, Xtreamer, BDP5200, Philips 24PFS4022/12, 65OLED855/12,UE32C5700, RPi3+
    ---- Einen Receiver kann sich jeder kaufen - Eine stabile E²-Box muß man sich verdienen! ----



  9. #9
    Mitglied
    Registriert seit
    30.10.2013
    Beiträge
    63
    Thanks (gegeben)
    0
    Thanks (bekommen)
    8
    Themenstarter
    Total Downloaded
    0
    Total Downloaded
    0
    ReceiverDanke
    Hi.
    Ich hab hier noch ein paar Infos:

    Code:
    
    Ausgabe von "mount"
    //192.168.178.203/video on /media/net/videoMEDIEN type cifs (rw,relatime,vers=1.0,sec=ntlm,cache=strict,unc=\\192.168.178.203\video,username=Sat-Receiver,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.178.203,unix,posixpaths,serverino,acl,rsize=61440,wsize=65536,actimeo=1)
    
    
    Auszug aus der smb.conf
    [global]
       load printers = no
       guest account = root
       log file = /tmp/smb.log
       log level = 1
       security = share
       server string = OpenATV %h network services
       workgroup = WORKGROUP
       netbios name = %h
       case sensitive=yes
       preserve case=yes
       short preserve case=yes
       socket options = TCP_NODELAY
       preferred master = no
       local master = no
       oplocks = no
       
       FSTAB Eintrag:
       //192.168.178.203/video /media/net/videoMEDIEN  cifs    user=Sat-Receiver,pass=XXXXXXX,_netdev,rw,iocharset=utf8      0 0
    Vielleicht hilft das noch.

    Danke und Gruß
    beckersbester


Stichworte

Lesezeichen

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •  
Alle Zeitangaben in WEZ +1. Es ist jetzt 15:26 Uhr.
Powered by vBulletin® Version 4.2.5 (Deutsch)
Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.
Resources saved on this page: MySQL 6,25%
Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)
vBulletin Skin By: PurevB.com