Thema: A867 dvb

hi, i've tryed to install avermedia a867 on my dm800se and openatv4.2 / 5.0 without success.

i've make a test with OpenPLi-4.0-beta-dm800se-20150419 and after these steps, avermedia a 867 working fine!!

root@dm800se:~# lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 07ca:a867
root@dm800se:~# opkg install kernel-module-dvb-usb-a867
Installing kernel-module-dvb-usb-a867 (3.2-r14.19.49.10) on root.
Downloading http://downloads.pli-images.org/feed...10_dm800se.ipk.
Installing kernel-module-dvb-usb (3.2-r14.19.49.10) on root.
Downloading http://downloads.pli-images.org/feed...10_dm800se.ipk.
Installing kernel-module-rc-core (3.2-r14.19.49.10) on root.
Downloading http://downloads.pli-images.org/feed...10_dm800se.ipk.
Configuring kernel-module-rc-core.
Configuring kernel-module-dvb-usb.
Configuring kernel-module-dvb-usb-a867.
root@dm800se:~# echo dvb-usb-a867 > /etc/modules-load.d/dvb-usb-a867
root@dm800se:~# update-modules
-sh: update-modules: not found
root@dm800se:~# reboot

Broadcast message from root@dm800se (pts/0) (Thu Jan 1 01:06:34 1970):

The system is going down for reboot NOW!
root@dm800se:~#


after reboot avermedia a867 working!!!
why on dm800se and openatv don't work???

p.s. on old dm800hd and openatv4.2 working fine.

there are some test for help You??

Same problem , i tried to use the a867 openpli kernel module but don't work

[ 41.426000] input: dreambox ir keyboard as /devices/virtual/input/input3
[ 41.439000] input: dreambox ir mouse as /devices/virtual/input/input4
[ 41.461000] 4036428 ms:
[ 42.310000] AVerMedia A867 driver module V1.0.27 loaded.
[ 42.310000] - By ItalySat.it
[ 260.477000] usb 1-1: USB disconnect, device number 2
[ 260.481000] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c0d87274, ra == c0d80564
[ 260.483000] Oops[#1]:
[ 260.483000] Cpu 0
[ 260.483000] $ 0 : 00000000 10008700 c0d87274 00000004
[ 260.483000] $ 4 : 00000000 00000000 00000000 0000ffff
[ 260.483000] $ 8 : 878f1aa7 878f1aa9 00000006 00000000
[ 260.483000] $12 : c5c2e000 00000000 1e9b0000 0002dbb6
[ 260.483000] $16 : 00000000 0000003a c0d80000 00000004
[ 260.483000] $20 : 00000004 00000022 c0d95340 878f1aa0
[ 260.483000] $24 : 00000001 00000070
[ 260.483000] $28 : 878f0000 878f1a90 878f1c00 c0d80564
[ 260.483000] Hi : 00000000
[ 260.483000] Lo : 46cb0000
[ 260.483000] epc : c0d87274 User_leaveCriticalSection+0x0/0x48 [dvb_usb_a867]
[ 260.483000] Tainted: P O
[ 260.483000] ra : c0d80564 Cmd_sendCommand+0x204/0x310 [dvb_usb_a867]
[ 260.483000] Status: 10008703 KERNEL EXL IE
[ 260.483000] Cause : 00800008
[ 260.483000] BadVA : 00000000
[ 260.483000] PrId : 0002a044 (Brcm4380)
[ 260.483000] Modules linked in: dvb_usb_a867(+) dvb_usb rc_core dreambox_keyboard(P) dreambox_rc2(P) bcm7405(P) alps_bsbe1(O) stv0299 cxd1981(P) helper(O) bcm4506(P) alps_bsbe1_c01a(P) cu1216mk3(P) tu1216(O) tmp100(P) alps_bsbe2(P) lnb_ctrl(P) snd_pcm snd_page_alloc snd_timer lcd(P) stb_core(P) fuse
[ 260.483000] Process modprobe (pid: 215, threadinfo=878f0000, task=872d2518, tls=77d4c920)
[ 260.483000] Stack : 00004fc7 81203c00 804f4c00 8049d1b4 00000006 ff000000 805000ff 00000000
[ 260.483000] 006bc3e3 fd3da7c8 00003d08 00000000 805027a8 80500000 80500000 8005b0d8
[ 260.483000] 2ee8aac0 00000000 006c3df5 800260b0 00003d08 00000000 805027a8 80500000
[ 260.500000] 00000400 00000000 804f0000 00000061 8049b080 00000001 00010420 00000061
[ 260.500000] 8049b080 8043c9ec 8043c974 00000001 80500000 80077cc4 80500000 00000001
[ 260.500000] ...
[ 260.500000] Call Trace:
[ 260.500000] [<c0d87274>] User_leaveCriticalSection+0x0/0x48 [dvb_usb_a867]
[ 260.500000] [<c0d80564>] Cmd_sendCommand+0x204/0x310 [dvb_usb_a867]
[ 260.500000] [<c0d80e4c>] Standard_getFirmwareVersion+0x68/0xcc [dvb_usb_a867]
[ 260.500000] [<c0d7a044>] DRV_SetBusTuner.constprop.1+0xbc/0x170 [dvb_usb_a867]
[ 260.500000] [<c0d7bef4>] Device_init+0x194/0xa80 [dvb_usb_a867]
[ 260.500000] [<c0d79324>] af903x_probe+0x188/0x4c4 [dvb_usb_a867]
[ 260.500000] [<802d3f24>] usb_probe_interface+0xe4/0x1e0
[ 260.500000] [<80264170>] driver_probe_device+0xa8/0x1e4
[ 260.500000] [<802643cc>] __driver_attach+0xbc/0xc4
[ 260.500000] [<80262880>] bus_for_each_dev+0x6c/0xb4
[ 260.500000] [<802638a4>] bus_add_driver+0xc8/0x2c4
[ 260.500000] [<80264968>] driver_register+0x9c/0x1bc
[ 260.500000] [<802d36f4>] usb_register_driver+0x88/0x1d0
[ 260.500000] [<c0dae050>] af903x_module_init+0x50/0x80 [dvb_usb_a867]
[ 260.500000] [<80001574>] do_one_initcall+0x164/0x1f0
[ 260.500000] [<8006c384>] sys_init_module+0x10e0/0x1f04
[ 260.500000] [<8000c828>] stack_done+0x20/0x44
[ 260.500000]
[ 260.500000]
[ 260.500000] Code: 27bd0018 03e00008 00001021 <8c840000> 1080000e 00000000 3c020001 2442458c 27bdffe8
[ 260.517000] ---[ end trace 4a11e032f6e7857c ]---
[ 260.630000] 219169 ms: 11
[ 260.690000] 60 ms: 13

At 260.477000 i removed the dvbt-a867 usbpen

from openpli - dm800se

[ 40.213000] input: dreambox ir mouse as /devices/virtual/input/input4
[ 41.037000] AVerMedia A867 driver module V1.0.27 loaded.
[ 41.037000] - By ItalySat.it
[ 41.472000] dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
[ 42.123000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 42.126000] DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
[ 42.303000] DVB: registering adapter 1 frontend 0 (A867 USB DVB-T)...
[ 42.350000] dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
[ 42.353000] usbcore: registered new interface driver dvb-usb-a867
[ 42.464000] r8712u: module is from the staging directory, the quality is unknown, you have been warned.

@ andydj

-re-flash with Openpli 4.0 your dm800se
-after setup receiver, turn off and connect the usb-a867
-restart the decoder
-open terminal and send this command.........lsusb
-if the answer is similar at......Bus 001 Device 002: ID 07ca:a867
-make others steps....
root@dm800se:~# opkg install kernel-module-dvb-usb-a867
root@dm800se:~# echo dvb-usb-a867 > /etc/modules-load.d/dvb-usb-a867
root@dm800se:~# update-modules
root@dm800se:~# reboot

-after reboot check if the dvb-t a867 is present in the tuner pannel

bye